From e3f3e2edb4f45ff5f53df3a3b4012bc5e60f1bb8 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 18 Jan 2008 15:33:10 +0000 Subject: Rename LinuxBIOS to coreboot Corresponding to flashrom svn r178 and coreboot v2 svn r3054. Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer --- board_enable.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'board_enable.c') diff --git a/board_enable.c b/board_enable.c index 79c6e87..27f431f 100644 --- a/board_enable.c +++ b/board_enable.c @@ -148,7 +148,7 @@ static int w83627thf_gpio4_4_raise_4e(const char *name) /** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * - * We don't need to do this when using LinuxBIOS, GPIO15 is never lowered there. + * We don't need to do this when using coreboot, GPIO15 is never lowered there. */ static int board_via_epia_m(const char *name) { @@ -368,7 +368,7 @@ struct board_pciid_enable { uint16_t second_card_vendor; uint16_t second_card_device; - /* The vendor / part name from the LinuxBIOS table. */ + /* The vendor / part name from the coreboot table. */ const char *lb_vendor; const char *lb_part; @@ -407,10 +407,10 @@ struct board_pciid_enable board_pciid_enables[] = { }; /** - * Match boards on LinuxBIOS table gathered vendor and part name. + * Match boards on coreboot table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static struct board_pciid_enable *board_match_linuxbios_name(const char *vendor, const char *part) +static struct board_pciid_enable *board_match_coreboot_name(const char *vendor, const char *part) { struct board_pciid_enable *board = board_pciid_enables; @@ -478,7 +478,7 @@ int board_flash_enable(const char *vendor, const char *part) int ret = 0; if (vendor && part) - board = board_match_linuxbios_name(vendor, part); + board = board_match_coreboot_name(vendor, part); if (!board) board = board_match_pci_card_ids(); -- cgit v1.1