From 73d2119473b3495c13f1c1e2057c65929b522a69 Mon Sep 17 00:00:00 2001 From: Luc Verhaegen Date: Wed, 23 Dec 2009 00:54:26 +0000 Subject: Chipset/Board: vt8237: Set All mem cycles to LPC in chipset enable Only done for VT8237R (possibly needed for VT8237 too), VT8235 does not need this (even if the original bios does so: Asus A7V8X-MX SE, MSI KT4V were verified). This then opens a floodgate of cleanups in the board enables. * EPIA SP board enable vanishes, taking EPIA CN match with it. * Asus A7V8X-MX/Tyan S2498 board enable then equals w836xx_memw_enable_2e * AOpen vKM400Am-S board enable then equals it8705_rom_write_enable * Epia M board enable becomes via_vt823x_gpio15_raise * Epia N board enable becomes via_vt823x_gpio9_raise * Asus M2V-MX board enable becomes via_vt823x_gpio5_raise * vt823x_gpio_set becomes via_vt823x_gpio_set, and now detects ISA bridge itself, in concordance with intel ich and nvidia mcp gpio. Corresponding to flashrom svn r815. Signed-off-by: Luc Verhaegen Acked-by: Sean Nelson Acked-by: Carl-Daniel Hailfinger --- board_enable.c | 205 +++++++++++++++------------------------------------------ 1 file changed, 53 insertions(+), 152 deletions(-) (limited to 'board_enable.c') diff --git a/board_enable.c b/board_enable.c index 716b77e..763a58b 100644 --- a/board_enable.c +++ b/board_enable.c @@ -191,26 +191,41 @@ static void w836xx_memw_enable(uint16_t port) } /** - * Common routine for several VT823x based boards. + * Suited for: + * - EPoX EP-8K5A2: VIA KT333 + VT8235. + * - Albatron PM266A Pro: VIA P4M266A + VT8235. + * - Shuttle AK31 (all versions): VIA KT266 + VT8233. + * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 + * - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237. */ -static void vt823x_set_all_writes_to_lpc(struct pci_dev *dev) +static int w836xx_memw_enable_2e(const char *name) { - uint8_t val; + w836xx_memw_enable(0x2E); - /* All memory cycles, not just ROM ones, go to LPC. */ - val = pci_read_byte(dev, 0x59); - val &= ~0x80; - pci_write_byte(dev, 0x59, val); + return 0; } + /** * VT823x: Set one of the GPIO pins. */ -static void vt823x_gpio_set(struct pci_dev *dev, uint8_t gpio, int raise) +static int via_vt823x_gpio_set(uint8_t gpio, int raise) { + struct pci_dev *dev; uint16_t base; uint8_t val, bit, offset; + dev = pci_dev_find_vendorclass(0x1106, 0x0601); + switch (dev->device_id) { + case 0x3177: /* VT8235 */ + case 0x3227: /* VT8237R */ + case 0x3337: /* VT8237A */ + break; + default: + fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n"); + return -1; + } + if ((gpio >= 12) && (gpio <= 15)) { /* GPIO12-15 -> output */ val = pci_read_byte(dev, 0xE4); @@ -228,7 +243,7 @@ static void vt823x_gpio_set(struct pci_dev *dev, uint8_t gpio, int raise) } else { fprintf(stderr, "\nERROR: " "VT823x GPIO%02d is not implemented.\n", gpio); - return; + return -1; } /* We need the I/O Base Address for this board's flash enable. */ @@ -243,103 +258,53 @@ static void vt823x_gpio_set(struct pci_dev *dev, uint8_t gpio, int raise) else val &= ~bit; OUTB(val, base + offset); -} - -/** - * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. - * - * We don't need to do this when using coreboot, GPIO15 is never lowered there. - */ -static int board_via_epia_m(const char *name) -{ - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n"); - return -1; - } - - /* GPIO15 is connected to write protect. */ - vt823x_gpio_set(dev, 15, 1); return 0; } /** - * Suited for: - * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 - * - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237. + * Suited for Asus M2V-MX: VIA K8M890 + VT8237A + IT8716F */ -static int board_asus_a7v8x_mx(const char *name) +static int via_vt823x_gpio5_raise(const char *name) { - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ - if (!dev) - dev = pci_dev_find(0x1106, 0x3227); /* VT8237 ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n"); - return -1; - } - - vt823x_set_all_writes_to_lpc(dev); - w836xx_memw_enable(0x2E); - - return 0; + /* On M2V-MX: GPO5 is connected to WP# and TBL#. */ + return via_vt823x_gpio_set(5, 1); } /** - * Suited for VIAs EPIA SP and EPIA CN. + * Suited for VIAs EPIA N & NL. */ -static int board_via_epia_sp(const char *name) +static int via_vt823x_gpio9_raise(const char *name) { - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT8237R ISA bridge not found.\n"); - return -1; - } - - vt823x_set_all_writes_to_lpc(dev); - - return 0; + return via_vt823x_gpio_set(9, 1); } /** - * Suited for VIAs EPIA N & NL. + * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. + * + * We don't need to do this for EPIA M when using coreboot, GPIO15 is never + * lowered there. */ -static int board_via_epia_n(const char *name) +static int via_vt823x_gpio15_raise(const char *name) { - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT8237R ISA bridge not found.\n"); - return -1; - } - - /* All memory cycles, not just ROM ones, go to LPC */ - vt823x_set_all_writes_to_lpc(dev); - - /* GPIO9 -> output */ - vt823x_gpio_set(dev, 9, 1); - - return 0; + return via_vt823x_gpio_set(15, 1); } /** + * Winbond W83697HF Super I/O + VIA VT8235 southbridge + * * Suited for: - * - EPoX EP-8K5A2: VIA KT333 + VT8235. - * - Albatron PM266A Pro: VIA P4M266A + VT8235. - * - Shuttle AK31 (all versions): VIA KT266 + VT8233. + * - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235 + * - MSI KT4 Ultra: AMD K7 + VIA KT400 + VT8235 */ -static int w836xx_memw_enable_2e(const char *name) +static int board_msi_kt4v(const char *name) { + int ret; + + ret = via_vt823x_gpio_set(12, 1); w836xx_memw_enable(0x2E); - return 0; + return ret; } /** @@ -919,6 +884,7 @@ static int board_kontron_986lcd_m(const char *name) * Suited for: * - Biostar P4M80-M4: VIA P4M800 + VT8237 + IT8705AF * - GIGABYTE GA-7VT600: VIA KT600 + VT8237 + IT8705 + * - AOpen vKM400Am-S: VIA KM400 + VT8237 + IT8705F. * * SIS950 superio probably requires the same flash write enable. */ @@ -942,49 +908,6 @@ static int it8705_rom_write_enable(const char *name) } /** - * Suited for AOpen vKM400Am-S: VIA KM400 + VT8237 + IT8705F. - */ -static int board_aopen_vkm400(const char *name) -{ - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3227); /* VT8237 ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT8237 ISA bridge not found.\n"); - return -1; - } - - vt823x_set_all_writes_to_lpc(dev); - - return it8705_rom_write_enable(name); -} - -/** - * Winbond W83697HF Super I/O + VIA VT8235 southbridge - * - * Suited for: - * - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235 - * - MSI KT4 Ultra: AMD K7 + VIA KT400 + VT8235 - */ -static int board_msi_kt4v(const char *name) -{ - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n"); - return -1; - } - - vt823x_set_all_writes_to_lpc(dev); - - vt823x_gpio_set(dev, 12, 1); - w836xx_memw_enable(0x2E); - - return 0; -} - -/** * Suited for Soyo SY-7VCA: Pro133A + VT82C686. */ static int board_soyo_sy_7vca(const char *name) @@ -1215,26 +1138,6 @@ static int board_asus_a7v600x(const char *name) } /** - * Suited for Asus M2V-MX: VIA K8M890 + VT8237A + IT8716F - */ -static int board_asus_m2v_mx(const char *name) -{ - struct pci_dev *dev; - - dev = pci_dev_find(0x1106, 0x3337); /* VT8237A ISA bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: VT8237A ISA bridge not found.\n"); - return -1; - } - - /* GPO5 is connected to WP# and TBL#. */ - vt823x_gpio_set(dev, 5, 1); - - return 0; -} - - -/** * Below is the list of boards which need a special "board enable" code in * flashrom before their ROM chip can be accessed/written to. * @@ -1268,13 +1171,13 @@ struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, "ASRock", "P4i65GV", intel_ich_gpio23_raise}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, "Albatron", "PM266A", w836xx_memw_enable_2e}, - {0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, "AOpen", "vKM400Am-S", board_aopen_vkm400}, + {0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, "AOpen", "vKM400Am-S", it8705_rom_write_enable}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe61", "Artec Group", "DBE61", board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe62", "Artec Group", "DBE62", board_artecgroup_dbe6x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, "ASUS", "A7V600-X", board_asus_a7v600x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, "ASUS", "A7V8X", board_asus_a7v8x}, - {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8X-MX SE", board_asus_a7v8x_mx}, - {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, "ASUS", "M2V-MX", board_asus_m2v_mx}, + {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8X-MX SE", w836xx_memw_enable_2e}, + {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, "ASUS", "M2V-MX", via_vt823x_gpio5_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, "ASUS", "P4B266-LM", intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, "ASUS", "P4P800-E Deluxe", intel_ich_gpio21_raise}, @@ -1310,11 +1213,9 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, "Shuttle", "AK38N", shuttle_ak38n}, {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, "Shuttle", "FN25", board_shuttle_fn25}, {0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x3058, 0x15DD, 0x7609, NULL, NULL, "Soyo", "SY-7VCA", board_soyo_sy_7vca}, - {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", board_asus_a7v8x_mx}, - {0x1106, 0x0314, 0x1106, 0xaa08, 0x1106, 0x3227, 0x1106, 0xAA08, NULL, NULL, "VIA", "EPIA-CN", board_via_epia_sp}, - {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA M/MII/...", board_via_epia_m}, - {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, "VIA", "EPIA-N/NL", board_via_epia_n}, - {0x1106, 0x3227, 0x1106, 0xAA01, 0x1106, 0x0259, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA SP", board_via_epia_sp}, + {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", w836xx_memw_enable_2e}, + {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA M/MII/...", via_vt823x_gpio15_raise}, + {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, "VIA", "EPIA-N/NL", via_vt823x_gpio9_raise}, {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, NULL, NULL, "VIA", "PC3500G", it87xx_probe_spi_flash}, { 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL}, /* end marker */ -- cgit v1.1