From 0d82e952f2a896aefa1187e53b0ec6d6d559fe9b Mon Sep 17 00:00:00 2001 From: Stefan Tauner Date: Sat, 27 Oct 2012 00:34:18 +0000 Subject: serprog: move the macro list to its own header file Corresponding to flashrom svn r1617. Signed-off-by: Stefan Tauner Acked-by: Stefan Tauner --- Documentation/serprog-protocol.txt | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/serprog-protocol.txt b/Documentation/serprog-protocol.txt index d8733cc..821cf28 100644 --- a/Documentation/serprog-protocol.txt +++ b/Documentation/serprog-protocol.txt @@ -92,28 +92,4 @@ Additional information of the above commands: In addition, support for these commands is recommended: S_CMD_Q_PGMNAME, S_CMD_Q_BUSTYPE, S_CMD_Q_CHIPSIZE (if parallel). - -This define listing should help C coders - (it's here to be the single source for copying - will be a .h someday i think) -#define S_ACK 0x06 -#define S_NAK 0x15 -#define S_CMD_NOP 0x00 /* No operation */ -#define S_CMD_Q_IFACE 0x01 /* Query interface version */ -#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */ -#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */ -#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */ -#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */ -#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */ -#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */ -#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */ -#define S_CMD_R_BYTE 0x09 /* Read a single byte */ -#define S_CMD_R_NBYTES 0x0A /* Read n bytes */ -#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */ -#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */ -#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */ -#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */ -#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */ -#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */ -#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */ -#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */ -#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */ -#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */ +See also serprog.h. -- cgit v1.1