From da7c545b06195185e9df9a88ef6437c61d64a225 Mon Sep 17 00:00:00 2001 From: Virgil-Adrian Teaca Date: Mon, 30 Apr 2012 23:11:06 +0000 Subject: Add serial port bitbanging code This adds the pony_spi driver which supports the SI_Prog adapter, which is commonly used for SPI chips with PonyProg 2000, and a custom adapter called "SERBANG" which differs in the logic of two pins. Corresponding to flashrom svn r1525. Signed-off-by: Virgil-Adrian Teaca Acked-by: Michael Karcher --- Makefile | 13 +++++ flashrom.c | 10 ++++ pony_spi.c | 160 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ print.c | 6 +++ programmer.h | 40 ++++++++++++++- serial.c | 55 ++++++++++++++++++++ 6 files changed, 283 insertions(+), 1 deletion(-) create mode 100644 pony_spi.c diff --git a/Makefile b/Makefile index 352ca29..d98a594 100644 --- a/Makefile +++ b/Makefile @@ -292,6 +292,9 @@ CONFIG_SERPROG ?= yes # RayeR SPIPGM hardware support CONFIG_RAYER_SPI ?= yes +# PonyProg2000 SPI hardware support +CONFIG_PONY_SPI ?= yes + # Always enable 3Com NICs for now. CONFIG_NIC3COM ?= yes @@ -348,6 +351,9 @@ CONFIG_PRINT_WIKI ?= no ifeq ($(CONFIG_RAYER_SPI), yes) override CONFIG_BITBANG_SPI = yes else +ifeq ($(CONFIG_PONY_SPI), yes) +override CONFIG_BITBANG_SPI = yes +else ifeq ($(CONFIG_INTERNAL), yes) override CONFIG_BITBANG_SPI = yes else @@ -362,6 +368,7 @@ endif endif endif endif +endif ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' @@ -388,6 +395,12 @@ PROGRAMMER_OBJS += rayer_spi.o NEED_PCI := yes endif +ifeq ($(CONFIG_PONY_SPI), yes) +FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1' +PROGRAMMER_OBJS += pony_spi.o +NEED_SERIAL := yes +endif + ifeq ($(CONFIG_BITBANG_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1' PROGRAMMER_OBJS += bitbang_spi.o diff --git a/flashrom.c b/flashrom.c index c60b46e..a54348d 100644 --- a/flashrom.c +++ b/flashrom.c @@ -201,6 +201,16 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_PONY_SPI == 1 + { + .name = "pony_spi", + .init = pony_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}, +#endif + #if CONFIG_NICINTEL == 1 { .name = "nicintel", diff --git a/pony_spi.c b/pony_spi.c new file mode 100644 index 0000000..b5dfc2f --- /dev/null +++ b/pony_spi.c @@ -0,0 +1,160 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2012 Virgil-Adrian Teaca + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Driver for the SI-Prog like hardware by Lancos.com. + * See http://www.lancos.com/siprogsch.html for schematics and instructions. + */ + +#include +#include + +#include "flash.h" +#include "programmer.h" + +/* We have: + + MOSI -----> DTR + MISO -----> CTS + SCK --+--> RTS + +--> DSR + CS# -----> TXD + +*/ + +enum pony_type { + TYPE_SI_PROG, + TYPE_SERBANG, +}; + +/* The hardware programmer used. */ +static enum pony_type pony_type = TYPE_SI_PROG; + +static void pony_bitbang_set_cs(int val) +{ + if (pony_type == TYPE_SI_PROG) + { + /* CS# is negated by the SI-Prog programmer. */ + val ^= 1; + } + sp_set_pin(PIN_TXD, val); +} + +static void pony_bitbang_set_sck(int val) +{ + sp_set_pin(PIN_RTS, val); +} + +static void pony_bitbang_set_mosi(int val) +{ + sp_set_pin(PIN_DTR, val); +} + +static int pony_bitbang_get_miso(void) +{ + int tmp; + + tmp = sp_get_pin(PIN_CTS); + + if (pony_type == TYPE_SERBANG) + { + /* MISO is negated by the SERBANG programmer. */ + tmp ^= 1; + } + return tmp; +} + +static const struct bitbang_spi_master bitbang_spi_master_pony = { + .type = BITBANG_SPI_MASTER_PONY, + .set_cs = pony_bitbang_set_cs, + .set_sck = pony_bitbang_set_sck, + .set_mosi = pony_bitbang_set_mosi, + .get_miso = pony_bitbang_get_miso, + .half_period = 0, +}; + +int pony_spi_init(void) +{ + char *arg = NULL; + int i, data_in, data_out, have_device = 0; + int have_prog = 1; + + /* The parameter is on format "dev=/dev/device,type=serbang" */ + arg = extract_programmer_param("dev"); + + if (arg && strlen(arg)) { + sp_fd = sp_openserport( arg, 9600 ); + have_device++; + } + free(arg); + + if (!have_device) { + msg_perr("Error: No valid device specified.\n" + "Use flashrom -p pony_spi:dev=/dev/device\n"); + + return 1; + } + /* Register the shutdown callback. */ + if (register_shutdown(serialport_shutdown, NULL)) { + return 1; + } + arg = extract_programmer_param("type"); + + if (arg) { + if (!strcasecmp( arg, "serbang")) { + pony_type = TYPE_SERBANG; + } else if (!strcasecmp( arg, "si_prog") ) { + pony_type = TYPE_SI_PROG; + } else { + msg_perr("Error: Invalid programmer type specified.\n"); + free(arg); + return 1; + } + } + free(arg); + + msg_pdbg("Using the %s programmer.\n", ((pony_type == TYPE_SI_PROG ) ? "SI-Prog" : "SERBANG")); + /* + * Detect if there is a SI-Prog compatible programmer connected. + */ + pony_bitbang_set_cs(1); + pony_bitbang_set_mosi(1); + + /* We toggle SCK while we keep MOSI and CS# on. */ + for (i = 1; i <= 10; ++i) { + data_out = i & 1; + sp_set_pin(PIN_RTS, data_out); + programmer_delay( 1000 ); + data_in = sp_get_pin(PIN_DSR); + + if (data_out != data_in) { + have_prog = 0; + break; + } + } + + if (!have_prog) { + msg_perr( "No SI-Prog compatible hardware detected.\n" ); + return 1; + } + + if (bitbang_spi_init(&bitbang_spi_master_pony)) { + return 1; + } + return 0; +} diff --git a/print.c b/print.c index 84a1604..0980570 100644 --- a/print.c +++ b/print.c @@ -507,6 +507,12 @@ void print_supported(void) /* FIXME */ msg_ginfo("RayeR parallel port programmer\n"); #endif +#if CONFIG_PONY_SPI == 1 + msg_ginfo("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_PONY_SPI].name); + /* FIXME */ + msg_ginfo("SI-Prog and SERBANG serial port programmer\n"); +#endif #if CONFIG_NICINTEL == 1 msg_ginfo("\nSupported devices for the %s programmer:\n", programmer_table[PROGRAMMER_NICINTEL].name); diff --git a/programmer.h b/programmer.h index 50be159..4d153e6 100644 --- a/programmer.h +++ b/programmer.h @@ -69,6 +69,9 @@ enum programmer { #if CONFIG_RAYER_SPI == 1 PROGRAMMER_RAYER_SPI, #endif +#if CONFIG_PONY_SPI == 1 + PROGRAMMER_PONY_SPI, +#endif #if CONFIG_NICINTEL == 1 PROGRAMMER_NICINTEL, #endif @@ -110,6 +113,9 @@ enum bitbang_spi_master_type { #if CONFIG_RAYER_SPI == 1 BITBANG_SPI_MASTER_RAYER, #endif +#if CONFIG_PONY_SPI == 1 + BITBANG_SPI_MASTER_PONY, +#endif #if CONFIG_NICINTEL_SPI == 1 BITBANG_SPI_MASTER_NICINTEL, #endif @@ -430,6 +436,11 @@ void print_supported_usbdevs(const struct usbdev_status *devs); int rayer_spi_init(void); #endif +/* pony_spi.c */ +#if CONFIG_PONY_SPI == 1 +int pony_spi_init(void); +#endif + /* bitbang_spi.c */ int bitbang_spi_init(const struct bitbang_spi_master *master); @@ -492,7 +503,7 @@ enum spi_controller { #if CONFIG_DEDIPROG == 1 SPI_CONTROLLER_DEDIPROG, #endif -#if CONFIG_OGP_SPI == 1 || CONFIG_NICINTEL_SPI == 1 || CONFIG_RAYER_SPI == 1 || (CONFIG_INTERNAL == 1 && (defined(__i386__) || defined(__x86_64__))) +#if CONFIG_OGP_SPI == 1 || CONFIG_NICINTEL_SPI == 1 || CONFIG_RAYER_SPI == 1 || CONFIG_PONY_SPI == 1 || (CONFIG_INTERNAL == 1 && (defined(__i386__) || defined(__x86_64__))) SPI_CONTROLLER_BITBANG, #endif #if CONFIG_LINUX_SPI == 1 @@ -636,4 +647,31 @@ int serialport_shutdown(void *data); int serialport_write(unsigned char *buf, unsigned int writecnt); int serialport_read(unsigned char *buf, unsigned int readcnt); +/* Serial port/pin mapping: + + 1 CD <- + 2 RXD <- + 3 TXD -> + 4 DTR -> + 5 GND -- + 6 DSR <- + 7 RTS -> + 8 CTS <- + 9 RI <- +*/ +enum SP_PIN { + PIN_CD = 1, + PIN_RXD, + PIN_TXD, + PIN_DTR, + PIN_GND, + PIN_DSR, + PIN_RTS, + PIN_CTS, + PIN_RI, +}; + +void sp_set_pin(enum SP_PIN pin, int val); +int sp_get_pin(enum SP_PIN pin); + #endif /* !__PROGRAMMER_H__ */ diff --git a/serial.c b/serial.c index b504974..0a56568 100644 --- a/serial.c +++ b/serial.c @@ -32,6 +32,9 @@ #include #else #include +#include +#include +#include #endif #include "flash.h" #include "programmer.h" @@ -172,6 +175,58 @@ fdtype sp_openserport(char *dev, unsigned int baud) #endif } +void sp_set_pin(enum SP_PIN pin, int val) { +#ifdef _WIN32 + DWORD ctl; + + if(pin == PIN_TXD) { + ctl = val ? SETBREAK: CLRBREAK; + } + else if(pin == PIN_DTR) { + ctl = val ? SETDTR: CLRDTR; + } + else { + ctl = val ? SETRTS: CLRRTS; + } + EscapeCommFunction(sp_fd, ctl); +#else + int ctl, s; + + if(pin == PIN_TXD) { + ioctl(sp_fd, val ? TIOCSBRK : TIOCCBRK, 0); + } + else { + s = (pin == PIN_DTR) ? TIOCM_DTR : TIOCM_RTS; + ioctl(sp_fd, TIOCMGET, &ctl); + + if (val) { + ctl |= s; + } + else { + ctl &= ~s; + } + ioctl(sp_fd, TIOCMSET, &ctl); + } +#endif +} + +int sp_get_pin(enum SP_PIN pin) { + int s; +#ifdef _WIN32 + DWORD ctl; + + s = (pin == PIN_CTS) ? MS_CTS_ON : MS_DSR_ON; + GetCommModemStatus(sp_fd, &ctl); +#else + int ctl; + s = (pin == PIN_CTS) ? TIOCM_CTS : TIOCM_DSR; + ioctl(sp_fd, TIOCMGET, &ctl); +#endif + + return ((ctl & s) ? 1 : 0); + +} + void sp_flush_incoming(void) { #ifdef _WIN32 -- cgit v1.1