From ccfe0acbbf5256ecc5ee6d1fe964d634d08e391f Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Wed, 27 Oct 2010 22:07:11 +0000 Subject: Fix internal offset calculations for SPI BYTE PROGRAM and SPI AAI PROGRAM The bug was invisible so far because we always started at offset 0. The pending partial write patch uses nonzero start offsets and trips over this bug. Clarify a few comments in IT87 SPI. Thanks to Idwer Vollering for reporting write breakage with my latest partial write patch. This should fix the underlying problem. Corresponding to flashrom svn r1217. Signed-off-by: Carl-Daniel Hailfinger Acked-by: Idwer Vollering --- it87spi.c | 11 ++++++----- spi25.c | 16 ++++++++++++---- 2 files changed, 18 insertions(+), 9 deletions(-) diff --git a/it87spi.c b/it87spi.c index f06efba..fb1448a 100644 --- a/it87spi.c +++ b/it87spi.c @@ -339,7 +339,10 @@ int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, { /* * IT8716F only allows maximum of 512 kb SPI chip size for memory - * mapped access. It also can't write more than 1+3+256 bytes at once. + * mapped access. It also can't write more than 1+3+256 bytes at once, + * so page_size > 256 bytes needs a fallback. + * FIXME: Split too big page writes into chunks IT87* can handle instead + * of degrading to single-byte program. */ if ((programmer == PROGRAMMER_IT87SPI) || (flash->total_size * 1024 > 512 * 1024) || @@ -349,9 +352,8 @@ int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int lenhere; if (start % flash->page_size) { - /* start to the end of the page or start + len, - * whichever is smaller. Page length is hardcoded to - * 256 bytes (IT87 SPI hardware limitation). + /* start to the end of the page or to start + len, + * whichever is smaller. */ lenhere = min(len, flash->page_size - start % flash->page_size); spi_chip_write_1(flash, buf, start, lenhere); @@ -360,7 +362,6 @@ int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, buf += lenhere; } - /* FIXME: Handle chips which have max writechunk size >1 and <256. */ while (len >= flash->page_size) { it8716f_spi_page_program(flash, buf, start); start += flash->page_size; diff --git a/spi25.c b/spi25.c index 39e9c8c..fc3173f 100644 --- a/spi25.c +++ b/spi25.c @@ -1309,7 +1309,7 @@ int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, int start, int len) int i, result = 0; for (i = start; i < start + len; i++) { - result = spi_byte_program(i, buf[i]); + result = spi_byte_program(i, buf[i - start]); if (result) return 1; while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) @@ -1377,6 +1377,14 @@ int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) if (spi_chip_write_1(flash, buf, start, start % 2)) return SPI_GENERIC_ERROR; pos += start % 2; + cmds[1].writearr = (const unsigned char[]){ + JEDEC_AAI_WORD_PROGRAM, + (pos >> 16) & 0xff, + (pos >> 8) & 0xff, + (pos & 0xff), + buf[pos - start], + buf[pos - start + 1] + }; /* Do not return an error for now. */ //return SPI_GENERIC_ERROR; } @@ -1406,8 +1414,8 @@ int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) /* Are there at least two more bytes to write? */ while (pos < start + len - 1) { - cmd[1] = buf[pos++]; - cmd[2] = buf[pos++]; + cmd[1] = buf[pos++ - start]; + cmd[2] = buf[pos++ - start]; spi_send_command(JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0, cmd, NULL); while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) programmer_delay(10); @@ -1420,7 +1428,7 @@ int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) /* Write remaining byte (if any). */ if (pos < start + len) { - if (spi_chip_write_1(flash, buf + pos, pos, pos % 2)) + if (spi_chip_write_1(flash, buf + pos - start, pos, pos % 2)) return SPI_GENERIC_ERROR; pos += pos % 2; } -- cgit v1.1