From 9a1105cffffce126a8c7c4a98d24e6b92d86e817 Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Fri, 4 Feb 2011 21:37:59 +0000 Subject: Support for Angelbird Wings PCIe SSD (solid-state drive) It uses a Marvell 88SX7042 SATA controller internally which has access to a separate flash chip hosting the option ROM. Thanks to Angelbird Ltd for sponsoring development of this driver! I expect the code to work for that SATA controller even if it is not part of the Angelbird SSD. Corresponding to flashrom svn r1258. Signed-off-by: Carl-Daniel Hailfinger Acked-by: Stefan Reinauer --- Makefile | 9 +++ flashrom.c | 24 +++++++- print.c | 5 ++ print_wiki.c | 3 + programmer.h | 12 ++++ satamv.c | 183 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 235 insertions(+), 1 deletion(-) create mode 100644 satamv.c diff --git a/Makefile b/Makefile index 370318c..9225204 100644 --- a/Makefile +++ b/Makefile @@ -155,6 +155,9 @@ CONFIG_BUSPIRATE_SPI ?= yes # Disable Dediprog SF100 until support is complete and tested. CONFIG_DEDIPROG ?= no +# Always enable Marvell SATA controllers for now. +CONFIG_SATAMV ?= yes + # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no @@ -283,6 +286,12 @@ FEATURE_LIBS += -lusb PROGRAMMER_OBJS += dediprog.o endif +ifeq ($(CONFIG_SATAMV), yes) +FEATURE_CFLAGS += -D'CONFIG_SATAMV=1' +PROGRAMMER_OBJS += satamv.o +NEED_PCI := yes +endif + ifeq ($(NEED_SERIAL), yes) LIB_OBJS += serial.o endif diff --git a/flashrom.c b/flashrom.c index bf1e3e0..4c6c1fa 100644 --- a/flashrom.c +++ b/flashrom.c @@ -52,7 +52,7 @@ enum programmer programmer = PROGRAMMER_DUMMY; * if more than one of them is selected. If only one is selected, it is clear * that the user wants that one to become the default. */ -#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI > 1 +#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV > 1 #error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one. #endif enum programmer programmer = @@ -99,6 +99,9 @@ enum programmer programmer = #if CONFIG_OGP_SPI == 1 PROGRAMMER_OGP_SPI #endif +#if CONFIG_SATAMV == 1 + PROGRAMMER_SATAMV +#endif ; #endif @@ -461,6 +464,25 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_SATAMV == 1 + { + .name = "satamv", + .init = satamv_init, + .shutdown = satamv_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = satamv_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satamv_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif + {}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; diff --git a/print.c b/print.c index 7ba2801..2ed22a7 100644 --- a/print.c +++ b/print.c @@ -317,6 +317,11 @@ void print_supported(void) programmer_table[PROGRAMMER_OGP_SPI].name); print_supported_pcidevs(ogp_spi); #endif +#if CONFIG_SATAMV == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_SATAMV].name); + print_supported_pcidevs(satas_mv); +#endif } #if CONFIG_INTERNAL == 1 diff --git a/print_wiki.c b/print_wiki.c index db5743e..d71c571 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -302,6 +302,9 @@ void print_supported_wiki(void) #if CONFIG_OGP_SPI == 1 print_supported_pcidevs_wiki(ogp_spi); #endif +#if CONFIG_SATAMV == 1 + print_supported_pcidevs_wiki(satas_mv); +#endif printf("\n|}\n"); } diff --git a/programmer.h b/programmer.h index 7bd1405..1f5fa25 100644 --- a/programmer.h +++ b/programmer.h @@ -79,6 +79,9 @@ enum programmer { #if CONFIG_OGP_SPI == 1 PROGRAMMER_OGP_SPI, #endif +#if CONFIG_SATAMV == 1 + PROGRAMMER_SATAMV, +#endif PROGRAMMER_INVALID /* This must always be the last entry. */ }; @@ -415,6 +418,15 @@ int ogp_spi_shutdown(void); extern const struct pcidev_status ogp_spi[]; #endif +/* satamv.c */ +#if CONFIG_SATAMV == 1 +int satamv_init(void); +int satamv_shutdown(void); +void satamv_chip_writeb(uint8_t val, chipaddr addr); +uint8_t satamv_chip_readb(const chipaddr addr); +extern const struct pcidev_status satas_mv[]; +#endif + /* satasii.c */ #if CONFIG_SATASII == 1 int satasii_init(void); diff --git a/satamv.c b/satamv.c new file mode 100644 index 0000000..d7db7e9 --- /dev/null +++ b/satamv.c @@ -0,0 +1,183 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010,2011 Carl-Daniel Hailfinger + * Written by Carl-Daniel Hailfinger for Angelbird Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Datasheets are not public (yet?) */ + +#include +#include "flash.h" +#include "programmer.h" + +uint8_t *mv_bar; +uint16_t mv_iobar; + +const struct pcidev_status satas_mv[] = { + /* 88SX6041 and 88SX6042 are the same according to the datasheet. */ + {0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"}, + + {}, +}; + +#define NVRAM_PARAM 0x1045c +#define FLASH_PARAM 0x1046c +#define EXPANSION_ROM_BAR_CONTROL 0x00d2c +#define PCI_BAR2_CONTROL 0x00c08 +#define GPIO_PORT_CONTROL 0x104f0 + +/* + * Random notes: + * FCE# Flash Chip Enable + * FWE# Flash Write Enable + * FOE# Flash Output Enable + * FALE[1:0] Flash Address Latch Enable + * FAD[7:0] Flash Multiplexed Address/Data Bus + * FA[2:0] Flash Address Low + * + * GPIO[15,2] GPIO Port Mode + * GPIO[4:3] Flash Size + * + * 0xd2c Expansion ROM BAR Control + * 0xc08 PCI BAR2 (Flash/NVRAM) Control + * 0x1046c Flash Parameters + */ +int satamv_init(void) +{ + uintptr_t addr; + uint32_t tmp; + + get_io_perms(); + + /* BAR0 has all internal registers memory mapped. */ + /* No need to check for errors, pcidev_init() will not return in case + * of errors. + */ + addr = pcidev_init(0x11ab, PCI_BASE_ADDRESS_0, satas_mv); + + mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000); + if (mv_bar == ERROR_PTR) + goto error_out; + + tmp = pci_mmio_readl(mv_bar + FLASH_PARAM); + msg_pspew("Flash Parameters:\n"); + msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7); + msg_pspew("Acc2First=0x%01x\n", (tmp >> 3) & 0xf); + msg_pspew("Acc2Next=0x%01x\n", (tmp >> 7) & 0xf); + msg_pspew("ALE2Wr=0x%01x\n", (tmp >> 11) & 0x7); + msg_pspew("WrLow=0x%01x\n", (tmp >> 14) & 0x7); + msg_pspew("WrHigh=0x%01x\n", (tmp >> 17) & 0x7); + msg_pspew("Reserved[21:20]=0x%01x\n", (tmp >> 20) & 0x3); + msg_pspew("TurnOffExt=0x%01x\n", (tmp >> 22) & 0x1); + msg_pspew("Acc2FirstExt=0x%01x\n", (tmp >> 23) & 0x1); + msg_pspew("Acc2NextExt=0x%01x\n", (tmp >> 24) & 0x1); + msg_pspew("ALE2WrExt=0x%01x\n", (tmp >> 25) & 0x1); + msg_pspew("WrLowExt=0x%01x\n", (tmp >> 26) & 0x1); + msg_pspew("WrHighExt=0x%01x\n", (tmp >> 27) & 0x1); + msg_pspew("Reserved[31:28]=0x%01x\n", (tmp >> 28) & 0xf); + + tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_BAR_CONTROL); + msg_pspew("Expansion ROM BAR Control:\n"); + msg_pspew("ExpROMSz=0x%01x\n", (tmp >> 19) & 0x7); + + /* Enable BAR2 mapping to flash */ + tmp = pci_mmio_readl(mv_bar + PCI_BAR2_CONTROL); + msg_pspew("PCI BAR2 (Flash/NVRAM) Control:\n"); + msg_pspew("Bar2En=0x%01x\n", (tmp >> 0) & 0x1); + msg_pspew("BAR2TransAttr=0x%01x\n", (tmp >> 1) & 0x1f); + msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7); + tmp &= 0xffffffc0; + tmp |= 0x0000001f; + /* FIXME: This needs to be an auto-reversible write. */ + pci_mmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL); + + /* Enable flash: GPIO Port Control Register 0x104f0 */ + tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL); + msg_pspew("GPIOPortMode=0x%01x\n", (tmp >> 0) & 0x3); + if (((tmp >> 0) & 0x3) != 0x2) + msg_pinfo("Warning! Either the straps are incorrect or you " + "have no flash or someone overwrote the strap " + "values!\n"); + tmp &= 0xfffffffc; + tmp |= 0x2; + /* FIXME: This needs to be an auto-reversible write. */ + pci_mmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL); + + /* Get I/O BAR location. */ + tmp = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) & + PCI_BASE_ADDRESS_IO_MASK; + /* Truncate to reachable range. + * FIXME: Check if the I/O BAR is actually reachable. + * This is an arch specific check. + */ + mv_iobar = tmp & 0xffff; + msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + /* 512 kByte with two 8-bit latches, and + * 4 MByte with additional 3-bit latch. */ + max_rom_decode.parallel = 4 * 1024 * 1024; + + return 0; + +error_out: + pci_cleanup(pacc); + release_io_perms(); + return 1; +} + +int satamv_shutdown(void) +{ + physunmap(mv_bar, 0x20000); + pci_cleanup(pacc); + release_io_perms(); + return 0; +} + +/* BAR2 (MEM) can map NVRAM and flash. We set it to flash in the init function. + * If BAR2 is disabled, it still can be accessed indirectly via BAR1 (I/O). + * This code only supports indirect accesses for now. + */ + +/* Indirect access to via the I/O BAR1. */ +static void satamv_indirect_chip_writeb(uint8_t val, chipaddr addr) +{ + /* 0x80000000 selects BAR2 for remapping. */ + OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar); + OUTB(val, mv_iobar + 0x80 + (addr & 0x3)); +} + +/* Indirect access to via the I/O BAR1. */ +static uint8_t satamv_indirect_chip_readb(const chipaddr addr) +{ + /* 0x80000000 selects BAR2 for remapping. */ + OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar); + return INB(mv_iobar + 0x80 + (addr & 0x3)); +} + +/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ +void satamv_chip_writeb(uint8_t val, chipaddr addr) +{ + satamv_indirect_chip_writeb(val, addr); +} + +/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ +uint8_t satamv_chip_readb(const chipaddr addr) +{ + return satamv_indirect_chip_readb(addr); +} -- cgit v1.1