From 31402ee6872ce2880f7fe98dc933e5bc73e8613c Mon Sep 17 00:00:00 2001 From: Wei Hu Date: Fri, 16 May 2014 21:39:33 +0000 Subject: sbxxx: Add support for new AMD SPI controller This patch adds support for the "SPI 100" SPI engine in Yangtze FCHs (found in Kabini and Temash). Tested reading/writing on ASRock IMB-A180 and PC Engines' APU board. Corresponding to flashrom svn r1794. Signed-off-by: Wei Hu Signed-off-by: Carl-Daniel Hailfinger Signed-off-by: Stefan Tauner Acked-by: Stefan Tauner --- print.c | 2 + programmer.h | 1 + sb600spi.c | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++----- 3 files changed, 131 insertions(+), 10 deletions(-) diff --git a/print.c b/print.c index 759908d..fd4b2a7 100644 --- a/print.c +++ b/print.c @@ -577,6 +577,7 @@ const struct board_info boards_known[] = { B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S", NULL), B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASRock", "IMB-180-H", OK, "http://www.asrock.com/ipc/overview.asp?Model=IMB-A180-H", NULL), B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), @@ -989,6 +990,7 @@ const struct board_info boards_known[] = { B("PC Engines", "Alix.3c3", OK, "http://pcengines.ch/alix3c3.htm", NULL), B("PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL), B("PC Engines", "Alix.6f2", OK, "http://pcengines.ch/alix6f2.htm", NULL), + B("PC Engines", "APU", OK, "http://pcengines.ch/apu.htm", NULL), B("PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL), B("PCWARE", "APM80-D3", OK, "http://www.pcwarebr.com.br/produtos_mb_apm80-d3.php", "Probably manufactured by ASUS"), B("Pegatron", "IPP7A-CP", OK, NULL, NULL), diff --git a/programmer.h b/programmer.h index 7670784..b896ddf 100644 --- a/programmer.h +++ b/programmer.h @@ -499,6 +499,7 @@ enum spi_controller { SPI_CONTROLLER_IT85XX, SPI_CONTROLLER_IT87XX, SPI_CONTROLLER_SB600, + SPI_CONTROLLER_YANGTZE, SPI_CONTROLLER_VIA, SPI_CONTROLLER_WBSIO, #endif diff --git a/sb600spi.c b/sb600spi.c index 9ecb4a0..bfe1204 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -4,7 +4,8 @@ * Copyright (C) 2008 Wang Qingpei * Copyright (C) 2008 Joe Bao * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010, 2013 Carl-Daniel Hailfinger + * Copyright (C) 2013 Stefan Tauner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -55,9 +56,12 @@ enum amd_chipset { static enum amd_chipset amd_gen = CHIPSET_AMD_UNKNOWN; #define FIFO_SIZE_OLD 8 +#define FIFO_SIZE_YANGTZE 71 static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); +static int spi100_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr); static struct spi_programmer spi_programmer_sb600 = { .type = SPI_CONTROLLER_SB600, @@ -70,6 +74,17 @@ static struct spi_programmer spi_programmer_sb600 = { .write_aai = default_spi_write_aai, }; +static struct spi_programmer spi_programmer_yangtze = { + .type = SPI_CONTROLLER_YANGTZE, + .max_data_read = FIFO_SIZE_YANGTZE - 3, /* Apparently the big SPI 100 buffer is not a ring buffer. */ + .max_data_write = FIFO_SIZE_YANGTZE - 3, + .command = spi100_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, + .write_aai = default_spi_write_aai, +}; + static void determine_generation(struct pci_dev *dev) { amd_gen = CHIPSET_AMD_UNKNOWN; @@ -276,6 +291,45 @@ static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, return 0; } +static int spi100_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) +{ + /* First byte is cmd which can not be sent through the buffer. */ + unsigned char cmd = *writearr++; + writecnt--; + msg_pspew("%s, cmd=0x%02x, writecnt=%d, readcnt=%d\n", __func__, cmd, writecnt, readcnt); + mmio_writeb(cmd, sb600_spibar + 0); + + int ret = check_readwritecnt(flash, writecnt, readcnt); + if (ret != 0) + return ret; + + /* Use the extended TxByteCount and RxByteCount registers. */ + mmio_writeb(writecnt, sb600_spibar + 0x48); + mmio_writeb(readcnt, sb600_spibar + 0x4b); + + msg_pspew("Filling buffer: "); + int count; + for (count = 0; count < writecnt; count++) { + msg_pspew("[%02x]", writearr[count]); + mmio_writeb(writearr[count], sb600_spibar + 0x80 + count); + } + msg_pspew("\n"); + + execute_command(); + + msg_pspew("Reading buffer: "); + for (count = 0; count < readcnt; count++) { + readarr[count] = mmio_readb(sb600_spibar + 0x80 + (writecnt + count) % FIFO_SIZE_YANGTZE); + msg_pspew("[%02x]", readarr[count]); + } + msg_pspew("\n"); + + return 0; +} + struct spispeed { const char *const name; const uint8_t speed; @@ -286,6 +340,10 @@ static const struct spispeed spispeeds[] = { { "33 MHz", 0x01 }, { "22 MHz", 0x02 }, { "16.5 MHz", 0x03 }, + { "100 MHz", 0x04 }, + { "Reserved", 0x05 }, + { "Reserved", 0x06 }, + { "800 kHz", 0x07 }, }; static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) @@ -294,7 +352,12 @@ static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) uint8_t speed = spispeed->speed; msg_pdbg("Setting SPI clock to %s (0x%x).\n", spispeed->name, speed); - if (amd_gen != CHIPSET_YANGTZE) { + if (amd_gen >= CHIPSET_YANGTZE) { + rmmio_writew((speed << 12) | (speed << 8) | (speed << 4) | speed, sb600_spibar + 0x22); + uint16_t tmp = mmio_readw(sb600_spibar + 0x22); + success = (((tmp >> 12) & 0xf) == speed && ((tmp >> 8) & 0xf) == speed && + ((tmp >> 4) & 0xf) == speed && ((tmp >> 0) & 0xf) == speed); + } else { rmmio_writeb((mmio_readb(sb600_spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), sb600_spibar + 0xd); success = (speed == ((mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3)); } @@ -306,6 +369,17 @@ static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) return 0; } +static int set_mode(struct pci_dev *dev, uint8_t read_mode) +{ + uint32_t tmp = mmio_readl(sb600_spibar + 0x00); + tmp &= ~(0x6 << 28 | 0x1 << 18); /* Clear mode bits */ + tmp |= ((read_mode & 0x6) << 28) | ((read_mode & 0x1) << 18); + rmmio_writel(tmp, sb600_spibar + 0x00); + if (tmp != mmio_readl(sb600_spibar + 0x00)) + return 1; + return 0; +} + static int handle_speed(struct pci_dev *dev) { uint32_t tmp; @@ -316,7 +390,47 @@ static int handle_speed(struct pci_dev *dev) * 18 rsvd <- fastReadEnable ? <- ? SpiReadMode[0] * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1] */ - if (amd_gen != CHIPSET_YANGTZE) { + if (amd_gen >= CHIPSET_YANGTZE) { + tmp = mmio_readb(sb600_spibar + 0x20); + msg_pdbg("UseSpi100 is %sabled\n", (tmp & 0x1) ? "en" : "dis"); + if ((tmp & 0x1) == 0) { + rmmio_writeb(tmp | 0x1, sb600_spibar + 0x20); + tmp = mmio_readb(sb600_spibar + 0x20) & 0x1; + if (tmp == 0) { + msg_perr("Enabling Spi100 failed.\n"); + return 1; + } + msg_pdbg("Enabling Spi100 succeeded.\n"); + } + + static const char *spireadmodes[] = { + "Normal (up to 33 MHz)", /* 0 */ + "Reserved", /* 1 */ + "Dual IO (1-1-2)", /* 2 */ + "Quad IO (1-1-4)", /* 3 */ + "Dual IO (1-2-2)", /* 4 */ + "Quad IO (1-4-4)", /* 5 */ + "Normal (up to 66 MHz)", /* 6 */ + "Fast Read", /* 7 */ + }; + tmp = mmio_readl(sb600_spibar + 0x00); + uint8_t read_mode = ((tmp >> 28) & 0x6) | ((tmp >> 18) & 0x1); + msg_pdbg("SpiReadMode=%s (%i)\n", spireadmodes[read_mode], read_mode); + if (read_mode != 6) { + read_mode = 6; /* Default to "Normal (up to 66 MHz)" */ + if (set_mode(dev, read_mode) != 0) { + msg_perr("Setting read mode to \"%s\" failed.\n", spireadmodes[read_mode]); + return 1; + } + msg_pdbg("Setting read mode to \"%s\" succeeded.\n", spireadmodes[read_mode]); + } + + tmp = mmio_readw(sb600_spibar + 0x22); /* SPI 100 Speed Config */ + msg_pdbg("NormSpeedNew is %s\n", spispeeds[(tmp >> 12) & 0xf].name); + msg_pdbg("FastSpeedNew is %s\n", spispeeds[(tmp >> 8) & 0xf].name); + msg_pdbg("AltSpeedNew is %s\n", spispeeds[(tmp >> 4) & 0xf].name); + msg_pdbg("TpmSpeedNew is %s\n", spispeeds[(tmp >> 0) & 0xf].name); + } else { if (amd_gen >= CHIPSET_SB89XX && amd_gen <= CHIPSET_HUDSON234) { bool fast_read = (mmio_readl(sb600_spibar + 0x00) >> 18) & 0x1; msg_pdbg("Fast Reads are %sabled\n", fast_read ? "en" : "dis"); @@ -412,12 +526,6 @@ int sb600_probe_spi(struct pci_dev *dev) return ERROR_NONFATAL; } - if (amd_gen == CHIPSET_YANGTZE) { - msg_perr("SPI on Kabini/Temash and newer chipsets are not yet supported.\n" - "Please try a newer version of flashrom.\n"); - return ERROR_NONFATAL; - } - /* How to read the following table and similar ones in this file: * "?" means we have no datasheet for this chipset generation or it doesn't have any relevant info. * "<-" means the bit/register meaning is identical to the next non-"?" chipset to the left. "<-" thus @@ -439,6 +547,8 @@ int sb600_probe_spi(struct pci_dev *dev) msg_pdbg("SpiRomEnable=%i", (tmp >> 1) & 0x1); if (amd_gen == CHIPSET_SB7XX) msg_pdbg(", AltSpiCSEnable=%i, AbortEnable=%i", tmp & 0x1, (tmp >> 2) & 0x1); + else if (amd_gen == CHIPSET_YANGTZE) + msg_pdbg(", RouteTpm2Sp=%i", (tmp >> 3) & 0x1); tmp = pci_read_byte(dev, 0xba); msg_pdbg(", PrefetchEnSPIFromIMC=%i", (tmp & 0x4) >> 2); @@ -473,6 +583,8 @@ int sb600_probe_spi(struct pci_dev *dev) */ tmp = mmio_readl(sb600_spibar + 0x00); msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); + if (amd_gen == CHIPSET_YANGTZE) + msg_pdbg(", IllegalAccess=%i", (tmp >> 21) & 0x1); msg_pdbg(", SpiAccessMacRomEn=%i, SpiHostAccessRomEn=%i, ArbWaitCount=%i", (tmp >> 22) & 0x1, (tmp >> 23) & 0x1, (tmp >> 24) & 0x7); @@ -485,6 +597,7 @@ int sb600_probe_spi(struct pci_dev *dev) msg_pdbg(", DropOneClkOnRd/SpiClkGate=%i", (tmp >> 28) & 0x1); case CHIPSET_SB89XX: case CHIPSET_HUDSON234: + case CHIPSET_YANGTZE: msg_pdbg(", SpiBusy=%i", (tmp >> 31) & 0x1); default: break; } @@ -498,6 +611,7 @@ int sb600_probe_spi(struct pci_dev *dev) if (amd_gen >= CHIPSET_SB89XX) { tmp = mmio_readb(sb600_spibar + 0x1D); msg_pdbg("Using SPI_CS%d\n", tmp & 0x3); + /* FIXME: Handle SpiProtect* configuration on Yangtze. */ } /* Look for the SMBus device. */ @@ -545,7 +659,11 @@ int sb600_probe_spi(struct pci_dev *dev) if (handle_imc(dev) != 0) return ERROR_FATAL; - register_spi_programmer(&spi_programmer_sb600); + /* Starting with Yangtze the SPI controller got a different interface with a much bigger buffer. */ + if (amd_gen != CHIPSET_YANGTZE) + register_spi_programmer(&spi_programmer_sb600); + else + register_spi_programmer(&spi_programmer_yangtze); return 0; } -- cgit v1.1