From 1e637844d58ed05e9b1c3fbffc5811b66bc0a0ad Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Fri, 15 May 2009 00:56:22 +0000 Subject: Additionally to WREN also handle WRSR failures gracefully for ICHSPI Until the ICH SPI driver can handle preopcodes as standalone opcodes, we should handle such special opcode failure gracefully on ICH and compatible chipsets. This fixes status register writes on almost all ICH+VIA SPI masters. The fix is almost identical to r484, but this time it affects the EWSR (Enable Write Status Register) opcode instead of the WREN (Write Enable) opcode. With the differentiated return codes introduced in r500, the workaround is more precise this time. The old WREN workaround was updated as well. Corresponding to flashrom svn r514. Signed-off-by: Carl-Daniel Hailfinger Acked-by: FENG Yu Ning Acked-by: Cristi Magherusan --- spi.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/spi.c b/spi.c index 2f2842c..71cf004 100644 --- a/spi.c +++ b/spi.c @@ -121,8 +121,10 @@ int spi_write_enable(void) /* Send WREN (Write Enable) */ result = spi_command(sizeof(cmd), 0, cmd, NULL); - if (result) { - printf_debug("spi_write_enable failed"); + + if (result) + printf_debug("%s failed", __func__); + if (result == SPI_INVALID_OPCODE) { switch (flashbus) { case BUS_TYPE_ICH7_SPI: case BUS_TYPE_ICH9_SPI: @@ -131,9 +133,12 @@ int spi_write_enable(void) " and hoping it will be run as PREOP\n"); return 0; default: - printf_debug("\n"); + break; } } + if (result) + printf_debug("\n"); + return result; } @@ -561,9 +566,29 @@ int spi_sector_erase(const struct flashchip *flash, unsigned long addr) int spi_write_status_enable(void) { const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR }; + int result; /* Send EWSR (Enable Write Status Register). */ - return spi_command(JEDEC_EWSR_OUTSIZE, JEDEC_EWSR_INSIZE, cmd, NULL); + result = spi_command(sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL); + + if (result) + printf_debug("%s failed", __func__); + if (result == SPI_INVALID_OPCODE) { + switch (flashbus) { + case BUS_TYPE_ICH7_SPI: + case BUS_TYPE_ICH9_SPI: + case BUS_TYPE_VIA_SPI: + printf_debug(" due to SPI master limitation, ignoring" + " and hoping it will be run as PREOP\n"); + return 0; + default: + break; + } + } + if (result) + printf_debug("\n"); + + return result; } /* -- cgit v1.1