From 0528b7fefa6daf35365c1dee0d21bc94e8120f78 Mon Sep 17 00:00:00 2001 From: Steve Markgraf Date: Fri, 12 Aug 2011 01:19:32 +0000 Subject: ft2232_spi: add support for the Dangerous Prototypes Bus Blaster Add support for the Dangerous Prototypes Bus Blaster (v1/v2). The new model is called "busblaster". So far only v2 has been tested, but since both v1 and v2 emulate a Amontec JTAGKEY in the default configuration, it is assumed that v1 should work fine as well. Information about the Busblaster can be found at: http://dangerousprototypes.com/docs/Bus_Blaster Corresponding to flashrom svn r1412. Signed-off-by: Steve Markgraf Acked-by: Stefan Tauner --- flashrom.8 | 8 ++++---- ft2232_spi.c | 6 ++++++ 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/flashrom.8 b/flashrom.8 index 6556609..1b9bf60 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -198,8 +198,8 @@ cards)" .BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H family \ based USB SPI programmer), including the DLP Design DLP-USB1232H, \ FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \ -JTAGkey/JTAGkey-tiny/JTAGkey-2, Olimex ARM-USB-TINY/-H, and Olimex \ -ARM-USB-OCD/-H." +JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \ +Olimex ARM-USB-TINY/-H, and Olimex ARM-USB-OCD/-H." .sp .BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \ including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \ @@ -440,8 +440,8 @@ type and interface/port it should support. For that you have to use the syntax where .B model can be -.BR 2232H ", " 4232H ", " jtagkey ", " openmoko ", " arm-usb-tiny ", " \ -arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h +.BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \ +arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h and .B interface can be diff --git a/ft2232_spi.c b/ft2232_spi.c index 689f276..cb247fa 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -173,6 +173,12 @@ int ft2232_spi_init(void) ft2232_interface = INTERFACE_A; cs_bits = 0x18; pindir = 0x1b; + } else if (!strcasecmp(arg, "busblaster")) { + /* In its default configuration it is a jtagkey clone */ + ft2232_type = FTDI_FT2232H_PID; + ft2232_interface = INTERFACE_A; + cs_bits = 0x18; + pindir = 0x1b; } else if (!strcasecmp(arg, "openmoko")) { ft2232_vid = FIC_VID; ft2232_type = OPENMOKO_DBGBOARD_PID; -- cgit v1.1