summaryrefslogtreecommitdiffstats
path: root/pcidev.c
Commit message (Collapse)AuthorAgeFilesLines
* Unify programmer parameter extractionCarl-Daniel Hailfinger2010-07-081-1/+1
| | | | | | | | | | | Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-1/+4
| | | | | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert various prints to use msg_p* and msg_g* respectivelySean Nelson2010-05-071-6/+6
| | | | | | | | | Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel. Corresponding to flashrom svn r997. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* PCI device BARs of all types had only bits 1:0 cleared while reading the addressCarl-Daniel Hailfinger2010-03-171-1/+17
| | | | | | | | | | | | That was correct for IO BARs, but failed to mask bit 3:2 for MEM BARs, resulting in odd offsets for prefetchable MEM BARs and for 64-bit capable MEM BARs. Mask the correct number of bits for all types of BARs and add some debug printing about BAR type. Corresponding to flashrom svn r946. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Replace PCI_OK/PCI_NT by OK/NTMichael Karcher2010-02-241-2/+2
| | | | | | | | | | We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols are already there (defined for the chipset enable table). Corresponding to flashrom svn r911. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Adjust a help text for external PCI programmers to the new parameter schemeCarl-Daniel Hailfinger2009-10-301-1/+1
| | | | | | | | | Pointed out by Maciej Pijanka. Corresponding to flashrom svn r754. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add initial support for flashing some NVIDIA graphics cardsUwe Hermann2009-09-301-5/+11
| | | | | | | | | | | | | | | | | | | | The new option is '-p gfxnvidia', rest of the interface is as usual. I tested a successful identify and read on a "RIVA TNT2 Model 64/Model 64 Pro" card for now, erase and write did NOT work properly so far! Please do not attempt to write/erase cards yet, unless you can recover! In addition to the NVIDIA handling code it was required to call programmer_shutdown() in a lot more places, otherwise the graphics card will be disabled in the init function, but never enabled again as the shutdown function is not called. The shutdown handling may be changed to use atexit() later. Corresponding to flashrom svn r737. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Luc Verhaegen <libv@skynet.be>
* Add support for parallel flash on Dr. Kaiser PC-Waechter PCI devicesTURBO J2009-09-021-6/+6
| | | | | | | | | | | | | | The vendor sold different designs under that name, the patch works with the one that has an Actel FPGA as PCI-to-Flash bridge. The Flash chip is a "Macronix MX29F001B" (128 KB, parallel) soldered directly to the PCB. Flash operations (PROBE, READ, ERASE, WRITE) work as expected. Corresponding to flashrom svn r712. Signed-off-by: TURBO J <turboj@gmx.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use a common parameter variable for all programmersCarl-Daniel Hailfinger2009-08-121-2/+1
| | | | | | | | | | This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Corresponding to flashrom svn r679. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Remove unnecessary #include filesCarl-Daniel Hailfinger2009-08-091-3/+0
| | | | | | | | | | Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Corresponding to flashrom svn r671. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* The project's new home is flashrom.org nowStefan Reinauer2009-07-301-1/+1
| | | | | | | | | Change all occurences in the source code and documentation accordingly. Corresponding to flashrom svn r669. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Various smaller flashrom improvementsUwe Hermann2009-05-171-6/+6
| | | | | | | | | | | | | | | | | | - Document new 'satasii' programmer in -L output and manpage. - Drop PCI_IO_BASE_ADDRESS, pci.h has such #defines already. - Beautify flashrom output and make it more consistent. - Same for the 'make' output (reordered some $CC parameters). Build-tested on i386, shouldn't break any builds, I think. - Some variable renaming and other cosmetic fixes. Corresponding to flashrom svn r529. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* This patch adds support for BIOS flashing on the all SiliconImage SATA ↵Rudolf Marek2009-05-171-2/+0
| | | | | | | | | | | | | controllers It was easy because 1) flashrom has now nice API 2) documentation is public on the web site Corresponding to flashrom svn r527. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add proper workaround for 3COM 3C90xB cards, which need special fixups (the ↵Uwe Hermann2009-05-161-3/+7
| | | | | | | | | | | | | | | | 3C90xC ones don't) This is tested on hardware. Also, add initial support for the Atmel AT29C010A chip (which I inserted in a 3COM 3C90xB card for testing). It can be detected, read works, erase works, but write will need some additional code (will post in another patch later). Corresponding to flashrom svn r520. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Older libpci versions (e.gUwe Hermann2009-05-161-1/+4
| | | | | | | | | | | | | | 2.2.8, as it's default on current FreeBSD 7.2) don't properly fill the base_addr[0] struct member, so revert back to an explicit pci_read_long() call, otherwise detection of PCI devices and their base address will fail with strange error messages. Thanks Idwer Vollering <vidwer@gmail.com> for reporting and testing. Corresponding to flashrom svn r518. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refactor parts of the 3COM NIC codeUwe Hermann2009-05-151-0/+115
Move the reusable PCI specific parts into pcidev.c, they'll be usable for other NIC code (Realtek, VIA, ...) and also for SATA/IDE controller cards as external programmers (for every PCI device which can program EEPROMs basically). Also add print_supported_pcidevs() to show the supported PCI devices (currently only NICs, soon more) in the 'flashrom -L' output. Corresponding to flashrom svn r515. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
OpenPOWER on IntegriCloud