summaryrefslogtreecommitdiffstats
path: root/flash.h
Commit message (Collapse)AuthorAgeFilesLines
...
* Disable writes on default for known bad programmersCarl-Daniel Hailfinger2010-07-031-0/+1
| | | | | | | | | | | | | If a programmer has untested or non-working write/erase code, but probing/reading works, it makes sense to protect the user against write/erase accidents. This feature will be used by the Nvidia MCP SPI code, and it also might make sense for the gfxnvidia driver which has non-working write/erase. Corresponding to flashrom svn r1069. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-15/+15
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add SPI chip read support to the dummy flasherCarl-Daniel Hailfinger2010-06-201-0/+1
| | | | | | | | | This allows using the dummy flasher for SPI read debugging. Corresponding to flashrom svn r1053. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* National Semiconductor DP83815/DP83816 and DP83820 NIC programmer supportAndrew Morgan2010-06-071-1/+12
| | | | | | | | | | Some instability remains, but that may be due to hardware problems in the specific card (Netgear FA311) used for testing. Corresponding to flashrom svn r1039. Signed-off-by: Andrew Morgan <ziltro@ziltro.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* board_enable.c: Remove useless 'name' parameterUwe Hermann2010-06-071-2/+2
| | | | | | | | | | | | Every board-enable function is passed a 'const char *name' (board name) which is totally useless as the board name was already printed by flashrom at that point. Also, 95% or so of the board-enables don't use the parameter anyway. So, drop it. Corresponding to flashrom svn r1037. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix wiki board enable parameter printingCarl-Daniel Hailfinger2010-06-071-6/+0
| | | | | | | | | | The logic was incorrect in one place which had && instead of ||. Move the board info #define B to the file where it is used. Corresponding to flashrom svn r1035. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Gcc and clang can check format strings of printf-like functionsCarl-Daniel Hailfinger2010-06-041-1/+2
| | | | | | | | | | | | Since we don't support any other compilers right now, enable that extension unconditionally. Fix the bugs found by format string checking. Corresponding to flashrom svn r1032. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Internal: introduce processor enables and abort if top/bottom alignment is ↵Carl-Daniel Hailfinger2010-06-041-0/+3
| | | | | | | | | | | | | | | | unknown The internal programmer needs correct information about flash_base and chip window top/bottom alignment on non-x86 before it can be used. Abort any internal programmer action for now until the code is fixed. Add the concept of a processor enable for systems where flashing is impacted by processor settings or processor model. Corresponding to flashrom svn r1031. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix fallout from r1021 which caused compile failures if only the dummy ↵Carl-Daniel Hailfinger2010-06-031-4/+1
| | | | | | | | | programmer was selected Corresponding to flashrom svn r1026. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Merge print.c and print_wiki.c board/URL tablesPeter Lemenkov2010-06-011-4/+14
| | | | | | | | | | Also, merge the tables in the output, i.e. there's only one table which contains both known-good and known-bad/untested boards. Corresponding to flashrom svn r1024. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* So far, we have up to 4 different names for the same thing (ignoring ↵Carl-Daniel Hailfinger2010-05-311-30/+30
| | | | | | | | | | | | | | | | | | | | | | capitalization) CONFIG_FT2232SPI (makefile config option) FT2232_SPI_SUPPORT (#define) ft2232spi (programmer name) ft2232_spi.c (programmer file) Use CONFIG_* with underscores for makefile config options and #defines and kill the useless _SUPPORT idiom. Use lowercase names with underscores for programmer names and programmer files. With this, you can run "grep -i ft2232_spi" and find everything related to the ft2232_spi driver. Same applies to all other programmers. Corresponding to flashrom svn r1023. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove unneeded #include statements completelyCarl-Daniel Hailfinger2010-05-301-3/+4
| | | | | | | | | | | | | | | Unistd.h was only used to get a definition of NULL in all files. Add our own NULL #define and remove unistd.h from flash.h stdio.h has no place in flash.h, it should be included only in files which really need it. Add #include statements in individual .c files where needed. Replace a few printf with msg_* to eliminate the need for stdio.h. Corresponding to flashrom svn r1021. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* ichspi: try harder to conform to address restrictionsCarl-Daniel Hailfinger2010-05-281-0/+2
| | | | | | | | | | | | | | ICH SPI can enforce address restrictions for all accesses which take an address (well, it could if the chipset implementation was not broken). Since exploiting the broken implementation is harder than conforming to the address restrictions wherever possible, conform to the address restrictions instead. This patch eliminates a lot of transaction errors people were seeing on chip probe. Corresponding to flashrom svn r1016. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com> Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
* Support for Realtek RTL8139 network card flashingJoerg Fischer2010-05-211-1/+17
| | | | | | | Corresponding to flashrom svn r1002. Signed-off-by: Joerg Fischer <turboj@gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix assorted documentation, frontend and printing bugsCarl-Daniel Hailfinger2010-05-151-0/+1
| | | | | | | | | | Change the command line interface to make file names positional. Add more sanity checks to the command line parser. Corresponding to flashrom svn r998. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* One of the problems is that --force had multiple meaningsCarl-Daniel Hailfinger2010-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Force chip read by faking probe success. - Force chip access even if the chip is bigger than max decode size for the flash bus. - Force erase even if erase is known bad. - Force write even if write is known bad. - Force writing even if cbtable tells us that this is the wrong image for this board. This patch cleans up --force usage: - Remove any suggestions to use --force for probe/read from flashrom output. - Don't talk about "success" or "Found chip" if the chip is forced. - Add a new internal programmer parameter boardmismatch=force. This overrides any mismatch detection from cbtable/image comparisons. - Add a new internal programmer parameter laptop=force_I_want_a_brick. - Adjust the documentation for --force. - Clean up the man page a bit whereever it talks about --force or laptops. Additional changes in this patch: - Add warnings about laptops to the documentation. - Abort if a laptop is detected. Can be overridden with the programmer parameter mentioned above. - Add "Portable" to the list of DMI strings indicating laptops. - Check if a chip specified with -c is known to flashrom. - Programmer parameter reliability and consistency fixes. - More paranoid self-checks. - Improve documentation. Corresponding to flashrom svn r996. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Intel 28F004/28F400 supportMichael Karcher2010-04-031-1/+1
| | | | | | | | | | | | | | | | | Remove blockwise write for i82802ab chips. It will be reintroduced in post-0.9.2 in a generic way. This is needed to fix FWH-like chips with non-uniform sectors. These are: Intel 28F001 Sharp LHF00L04 ST M50FW002 ST M50LPW116 Corresponding to flashrom svn r991. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Multibyte SPI write for the Bus PirateCarl-Daniel Hailfinger2010-03-221-0/+1
| | | | | | | Corresponding to flashrom svn r964. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Write granularity is chip specificCarl-Daniel Hailfinger2010-03-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | The following write granularities exist according to my datasheet survey: - 1 bit. Each bit can be cleared individually. - 1 byte. A byte can be written once. Further writes to an already written byte cause the contents to be either undefined or to stay unchanged. - 128 bytes. If less than 128 bytes are written, the rest will be erased. Each write to a 128-byte region will trigger an automatic erase before anything is written. Very uncommon behaviour. - 256 bytes. If less than 256 bytes are written, the contents of the unwritten bytes are undefined. Note that chips with default 256-byte writes, which keep the original contents for unwritten bytes, have a granularity of 1 byte. Handle 1-bit, 1-byte and 256-byte write granularity. Corresponding to flashrom svn r927. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: David Hendricks <dhendrix@google.com>
* Implement tested/untested status for board enablesMichael Karcher2010-02-281-0/+2
| | | | | | | | | | | | | | | The message printing code greatly exceed the 80 character limit. I can reformat it on request to obey the limit. Intended behaviour: on untested boards an explanation of that status is printed and the board enable code is not run, unless the option "boardenable=force" has been passed to the internal programmer. Corresponding to flashrom svn r919. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Warn if running on laptopsMichael Karcher2010-02-261-0/+1
| | | | | | | Corresponding to flashrom svn r916. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-2/+0
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Replace PCI_OK/PCI_NT by OK/NTMichael Karcher2010-02-241-2/+0
| | | | | | | | | | We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols are already there (defined for the chipset enable table). Corresponding to flashrom svn r911. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add initial (non-working) code for Highpoint ATA/RAID controllersUwe Hermann2010-02-211-1/+13
| | | | | | | | | | It's disabled by default. The current status is detailed at: http://www.flashrom.org/pipermail/flashrom/2010-January/001828.html Corresponding to flashrom svn r908. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Here's a very quick patch to fix the missing unlock codeSean Nelson2010-02-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Fixes missing unlock for certain chips: * unlock_49lf00x * Pm49fl002 * Pm49fl004 * unlock_49flxxxc * SST49LF160C * unlock_winbond_fwhub * W39V080FA * W39V080FA (dual mode) Fixes missing printlock for certain chip: * printlock_w39v040c * W39V040C Corresponding to flashrom svn r907. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Allow the registration of functions to be called at programmer shutdownCarl-Daniel Hailfinger2010-02-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some programmers want to run certain functions during programmer shutdown, but the function choice depends on the code path taken during programmer init. Rather than rebuilding the whole init logic in the shutdown function, it is now possible to register functions for execution on programmer shutdown. The behaviour is similar to atexit(), but the registered functions will be run on programmer shutdown instead of on exit and the functions will be called with a void * argument that is specified on registration. Registered functions must have the prototype void function(void *); and will be executed in reverse registration order directly before calling the programmer-specific shutdown() function. It is recommended to have shutdown() only disable programmer/hardware access and leave all code path sensitive shutdown to functions registered with register_shutdown(). The most prominent use case is resetting the EC after flashing on laptops. Note: There are quite a few code paths in flashrom which proceed to terminate flashrom without any programmer shutdown. Those code paths will not get the benefit of register_shutdown() and they should be changed wherever possible. Corresponding to flashrom svn r904. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* At long last, the day has come, and we can bury full-chip erase once and for allCarl-Daniel Hailfinger2010-02-111-1/+0
| | | | | | | | | | | | | | Back in November 2008(!) I proposed the first version of the flexible sector-based erase structure, and now we can finally rip out the old full-chip erase code without ill effects. Rejoice and party! Thanks to everyone who made this possible, especially to Sean Nelson who converted the majority of flash chips to sector erase. Corresponding to flashrom svn r895. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Create a physical memory mapping function which requests cached readonly memoryCarl-Daniel Hailfinger2010-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | This should take care of picky Linux kernels which do not allow uncached mappings to cached areas. Handle mapping failure gracefully (no forced exit()) if the caller specifies it. Such cached areas which can handle mapping failure are DMI tables and coreboot tables. On failure we just ignore those tables. That is not perfect, but a lot better than aborting flashrom due to an error in nonessential functionality. This should fix flashrom on a sizable number of machines where it currently aborts early. Yes, I could have exploited a Linux kernel bug to "solve" this, but relying on such bugs is not exactly the best idea. Corresponding to flashrom svn r889. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Vincent Pelletier <plr.vincent@gmail.com>
* Complete the addition of Feature Bits for all Jedec based chipsSean Nelson2010-01-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add FEATURE_SHORT_RESET, FEATURE_LONG_RESET, and FEATURE_EITHER_RESET rewrite jedec functions to use getaddrmask convert write_49f002 to write_jedec_1 convert write_w39v040c to write_jedec_1 convert probe_w39v040c to probe_jedec convert write_49lf040 to write_jedec_1 convert write_pm29f002 to write_jedec convert write_29f040b to write_jedec_1 convert probe_29f040b to probe_jedec convert erase_chip_29f040b to erase_chip_block_jedec convert erase_sector_29f040b to erase_sector_jedec convert write_m29f002b to write_jedec convert write_m29f002t to write_jedec convert *_29f002 to *_jedec decouple unused files from Makefile: am29f040b.c en29f002a.c m29f002.c mx29f002.c pm29f002.c sst49lf040.c w39v040c.c w49f002u.c Corresponding to flashrom svn r886. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
* Boards: Add max_rom_decode_parallel entry to board enable tableLuc Verhaegen2010-01-201-0/+1
| | | | | | | | | This is a quick fix for board specific parallel addressing limits. Corresponding to flashrom svn r875. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Matching board via DMIMichael Karcher2010-01-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a board is not uniquely identifiable by PCI device/subsystem IDs, a string can be specified to be looked for (case-sensitive, substring or anchored) for now in one of the following DMI items in addition to matching the PCI IDs: - System Manufacturer - System Product Name - System Version - Baseboard Manufacturer - Baseboard Product Name - Baseboard Version Strings are anchored re-like (^ at the beginning, $ at the end), but there are no plans to support full regular expressions and matched to any of the mentioned fields. The match is only made if DMI info is available and the string matches. If no DMI info is available and the PCI IDs match, a warning is printed as the board can not be autodetected. It's still open to discussion whether we add an DMI override switch to specify a string that will definitely match, and whether this switch is only used if no DMI is available or whether it overrides or augments DMI data. DMI data is currently read using dmidecode. This tool is available for all major platforms except MacOS X. I heard that there also is a MacOS X version of dmidecode, but didn't investigate that. Corresponding to flashrom svn r874. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Dediprog SF100 supportCarl-Daniel Hailfinger2010-01-191-0/+12
| | | | | | | | | | | | | | | | | | | | | | | Reverse engineered from USB logs. I never touched that programmer nor did I ever see the associated software. Disabled by default until it is complete. The driver needs to be hooked up to the SPI core before it will do anything besides init and diagnostics. I successfully reverse engineered all commands, but some are still somewhat magic. Logs from "flashrom -p dediprog -V" are appreciated. Probe and read should work, erase/write is expected to explode. The programmer will set voltage to 0 on exit. Thanks a lot to Stefan Reinauer and Patrick Georgi for providing USB logs and for testing the result. Corresponding to flashrom svn r870. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Enable -Wshadow, clean code for thatMichael Karcher2010-01-121-1/+0
| | | | | | | | | | | | | | This is not just for fun. We hit a real bug on BSD with the outl macros. The macro variable tmp collided with the tmp from outer scope. second revision, now also taking care of inb/inw/inl. While that shadowing did not introduce bugs (yet), of course it breaks the build on BSD when -Wshadow is enabled. Corresponding to flashrom svn r860. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be>
* Change msg_* macros to C99 variadic macrosCarl-Daniel Hailfinger2010-01-091-16/+16
| | | | | | | | | | | | | | | | | The msg_* macros won't compile as is if you use more than one parameter (i.e. have a format string and a variable). There are two alternative styles: GNU or C99 variadic macros. While C99 has limitations compared to the GNU extensions, these limitations do not affect our macros, so I decided to go with the standard way. I adjusted whitespace a bit to have aligned values (cosmetic change). Corresponding to flashrom svn r841. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use address mask in probe_jedecCarl-Daniel Hailfinger2010-01-091-2/+4
| | | | | | | | | | | | This allows us to have one common probe_jedec function instead of half a dozen wrappers. The trick here is to have FEATURE_ADDR_FULL==0 and thus default to unmasked addresses. That way, we only have to annotate chips which need small address masks. Corresponding to flashrom svn r840. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Converting fprintf(stderr), printf, and printf_debug into a common print ↵Sean Nelson2010-01-071-0/+19
| | | | | | | | | | | | | interface for flashrom It also changes so -VV will spit out highly verbose messages for debugging. This is a minimal patch to lessen impact a later patch will convert current printf messages to the new interface. Corresponding to flashrom svn r835. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move the CLI related functions main() and cli_usage() to cli_classic.cCarl-Daniel Hailfinger2010-01-071-0/+10
| | | | | | | | | | | | | | | | | | And rename them accordingly. For now, main() just calls cli_classic(), but alternative frontends can be switched in main(). Annotate remaining help texts with CLI dependency inside flashrom.c with a FIXME comment. Now people can go and create different frontends and be happy. Please note that any other frontend will have to sort of duplicate the probing code in cli_classic.c. Refactoring that part of the code is possible, but not easy because we still want to print instructive help messages for users. Corresponding to flashrom svn r833. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Buspiratespi support on mingwPatrick Georgi2010-01-061-2/+13
| | | | | | | Corresponding to flashrom svn r832. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Multiple unrelated changesPatrick Georgi2010-01-061-1/+0
| | | | | | | | | | | | | | | - replace the hand written serial input flush routine with the termios one. - serialport_discard_read isn't necessary anymore - it just wrapped sp_flush_incoming with no extra value. - serialport_read and serialport_write would misbehave if read or write didn't process everything in one go. - sp_flush_incoming should be #define'd out for FAKE_COMMUNICATION like serialport_discard_read was Corresponding to flashrom svn r831. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move OS-dependent serial code from buspirate_spi.c to serial.cCarl-Daniel Hailfinger2010-01-061-0/+4
| | | | | | | | | | While at it, also rename a few functions to make it obvious that they are generic and not specific to the Bus Pirate. Corresponding to flashrom svn r830. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* Move generic programmer function into newly introduced programmer.cCarl-Daniel Hailfinger2010-01-061-0/+2
| | | | | | | | | | | | | | Some programmers (most notably FT2232SPI) use fallback_* and noop_*, but those functions lived inside internal.c and were unavailable if no PCI-based programmers were compiled in. Move those functions to the new file programmer.c. Thanks to Patrick Georgi for finding this. Corresponding to flashrom svn r829. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* Generify jedec functions by introducing an address maskSean Nelson2010-01-041-0/+4
| | | | | | | | | | | | | | | | | The patch converts jedec functions into mask-based generics which can be used for many chip provided the only changes are the addresses are converted from 0x5555/0x2AAA to 0x555/0x2AA or similar. The patch mostly changes jedec.c, but a few other files are changed because they use the jedec functions within their own functions. The patch also adds a copyright line to flashchips.c because of my recent work in converting AMD and Atmel chips to use struct erase_block. Corresponding to flashrom svn r828. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Internal.c was always compiled in because it hosted the function ↵Carl-Daniel Hailfinger2009-12-241-1/+1
| | | | | | | | | | | | | internal_delay() Move that function to udelay.c and compile internal.c only if really needed. physmap.c is only needed if the programmer is internal or a PCI card. Make its compilation conditional. Corresponding to flashrom svn r822. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Factor out CLI code by moving generic stuff out of main()Carl-Daniel Hailfinger2009-12-241-0/+1
| | | | | | | | | | | | | Add a generic programmer list output function to be used by alternative frontends. The interface between main() and doit is a hack and should get a clean design, but for now it serves the purpose of shortening main() by 120 lines. The rest of main() needs to be refactored a bit more before moving main() away. Corresponding to flashrom svn r821. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* SuperI/O detection now happens unconditionally and before the chipset enableCarl-Daniel Hailfinger2009-12-221-0/+10
| | | | | | | | | | | | | | | | | We could run it after chipset enable, but it definitely has to happen before board enable because the board enable usually accesses the SuperI/O. With this patch, it is possible to add a struct superio to the board enable table for more accurate matching in case subsystem IDs are ambiguous. This patch focuses on the generic infrastructure aspect and on support for IT8712F/IT8716F. Thanks go to Adrian Glaubitz and Ward Vandewege for testing. Corresponding to flashrom svn r813. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* Clarify comment about how to enter chip erase functions in struct block_eraserCarl-Daniel Hailfinger2009-12-221-2/+2
| | | | | | | | | Reported by Sean Nelson. Corresponding to flashrom svn r811. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split hardware access, OS abstraction and chip drivers out of flash.hCarl-Daniel Hailfinger2009-12-141-216/+10
| | | | | | | | | | | | | | | | This patch is only the first step, but it hopefully will make working with the code and especially porting to new platforms easier. Subsequent patches should move #includes for the newly created files hwaccess.h and chipdrivers.h from flash.h to the files which need them. Programmers should live in a separate header file as well. Tested-by: Idwer Vollering <vidwer@gmail.com> Corresponding to flashrom svn r799. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Internal (onboard) programming was the only feature which could not be disabledCarl-Daniel Hailfinger2009-12-131-11/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make various pieces of code conditional on support for internal programming. Code shared between PCI device programmers and onboard programming is now conditional as well. It is now possible to build only with dummy support: make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no This allows building for a specific use case only, and it also facilitates porting to a new architecture because it is possible to focus on highlevel code only. Note: Either internal or dummy programmer needs to be compiled in due to the current behaviour of always picking a default programmer if -p is not specified. Picking an arbitrary external programmer as default wouldn't make sense. Build and runtime tested in all 1024 possible build combinations. The only failures are by design as mentioned above. Corresponding to flashrom svn r797. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use common jedec functionality where appropriateMichael Karcher2009-11-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The deleted function in en29f002a.c is reintroduced as write_by_byte_jedec in jedec.c as it contains no chip-specific instructions. It is not yet used in other chip drivers, as key addresses (0x2AAA/0x5555) are often specified with less bits. After crosschecking datasheets, most of the fixmes can probably be resolved as indicated in them, causing significant code reduction. The common JEDEC code for bytewise programming does not program 0xFF at all. The chips that had a dedicated bytewise flash function which has been changed to write_jedec_1 thus changed flashing behaviour and the "write" test flag has been removed. This applies to: AMD Am29F002BB/Am29F002NBB AMD Am29F002BT/Am29F002NBT (TEST_OK_PREW before) AMIC A29002B AMIC A29002T (TEST_OK_PREW before) EON EN29F002(A)(N)B EON EN29F002(A)(N)T (TEST_OK_PREW before) Macronix MX29F001B (TEST_OK_PREW before) Macronix MX29F001T (TEST_OK_PREW before) Macronix MX29F002B Macronix MX29F002T (TEST_OK_PREW before) Macronix MX29LV040 Similar analysis should be performed for the read id stuff. Corresponding to flashrom svn r785. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
OpenPOWER on IntegriCloud