summaryrefslogtreecommitdiffstats
path: root/dummyflasher.c
Commit message (Collapse)AuthorAgeFilesLines
* Add a bunch of new/tested stuff and various small changes 24Stefan Tauner2016-01-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASRock G31M-GS Reported by Александр Трубицын - ASRock G41M-VS3 Reported by Александр Трубицын - ASRock N68C-S UCC Reported by Alexey Belyaev - ASRock AMCP7AION-HT (ION 330HT(-BD)) Reported by Stefan Tauner - ASUS P5K SE Reported by Александр Трубицын - ASUS P5KPL-VM Reported by Marin Vlah - ASUS RAMPAGE III GENE Reported by stevessss on IRC - GIGABYTE GA-945GM-S2 Reported by Александр Трубицын - GIGABYTE GA-945GCM-S2 (rev. 3.0) Reported by Александр Трубицын - GIGABYTE GA-965P-S3 Reported by Александр Трубицын - GIGABYTE GA-EG43M-S2H Reported by Александр Трубицын - GIGABYTE GA-EP31-DS3L (rev. 1.0) Reported by Александр Трубицын - GIGABYTE GA-G33M-S2 Reported by Александр Трубицын - GIGABYTE GA-G33M-S2L Reported by Александр Трубицын - GIGABYTE GA-H55M-S2 Reported by Александр Трубицын - GIGABYTE GA-J1900N-D3V Reported by Marcos Truchado and Guillermo von Hünefeld - GIGABYTE GA-K8NS Reported by nicolae788 - GIGABYTE GA-M56S-S3 Reported by Estevo Paz Freire - GIGABYTE GA-P31-DS3L Reported by Александр Трубицын - GIGABYTE GA-P31-S3G Reported by Александр Трубицын - MSI MS-7336 Reported by Benjamin Bellec - MSI X79A-GD45 (8D) (MS-7760)" Reported by mortehu on IRC - Supermicro A1SAi-2550F Reported by Bernard Grymonpon - Supermicro X7DWT Reported by Steven Stremciuc Laptop: - ASUS U38N Reported by Ultra on IRC - Dell Latitude D630 Reported by Márton Miklós - Fujitsu Amilo Xi 3650 Reported by Elmar Stellnberger - Lenovo T400 (whitelisting only) Chipsets: - Mark 8086:1f38 (Intel Avoton/Rangeley) as tested Reported by Jeremy Porter and Bernard Grymonpon - Add Intel Sunrise Point IDs but no support yet. Flash chips: - Atmel AT45DB321D to PREW (+PREW) Reported by The Raven - Eon EN25QH32 to PREW (+PREW) Reported by Josua Mayer - Eon EN25QH64 to PREW (+EW) Reported by David s. Alessio - GigaDevice GD25LQ64(B) to PREW (+PREW) Reported by Greg Tippit - Intel 28F001BN/BX-T to PREW (+EW) Reported by Lu Xie - Micron M25P10-A to PREW (+W) Reported by the Raven - Micron M25PE40 Reported by David Wood - Micron N25Q128..3E to PREW (+PREW) Reported by Miklós Márton - Macronix MX25L3273E to PREW (+PREW) Reported by Roklobsta on IRC - Macronix MX23L6454 to PR (+PR) Reported by Steven Honeyman - Macronix MX25U6435E/F to PREW (+PREW) Reported by Marcos Truchado and Guillermo von Hünefeld - PMC Pm25LQ032C to PREW (+EW) Reported by Dirk Knop - Spansion S25FL016A to PREW (+EW) Reported by Márton Miklós - Spansion S25FL128S......0 to PREW (+PREW) Reported by Jim Houston - Spansion S25FL204K to PR (+PR) Reported by Thomas Debrunner - SST SST49LF016C to PREW (+EW) Reported by Steven Stremciuc - SST SST39VF040 to PREW (+PREW) Reported by Xavier Bourgeois - SST SST49LF040B to PREW (+EW) Reported by Rikard Åhlund - ST M25P10-A to PREW (+W) Reported by Martijn Schiedon - Winbond W39V040FA to PREW (+EW) Reported by Евгений Черкашин - Winbond W39V080FA to PREW (+EW) Reported by protagonist0 on IRC - Winbond W25Q80.W to PREW (+PREW) Reported by Miklós Márton - Winbond W25X64 to PREW (+REW) Reported by Johannes Krampf and Manuel Dejonghe - Fix ID of AMIC A25LQ64 Reported by Roman Titov - Fix page size of Spansion S25FL129P......1 Copy and paste error from the 128S uniform 256kB variant, probably. - Add Micron/Numonyx phase-change memory IDs Miscellaneous: - Detect Android target OS. No changes are required to build flashrom (excluding programmers with NEED_PCI) on Android. - Update rayerspi (spipgm) URL - Fix max_data_write handling of at45db. - Minor refinement of the README - Mark board enable for the GA-K8NS variants as tested. Tested by "nicolae788" on a board with socket 754. - Mark "Multi-system" chassis as non-laptop case. - Remove W836xx log requests. We got enough (and no one is looking at them for the time being anyway). - serprog: improve invalid reply error message, contributed by Urja Rannikko. - Remove default include paths for MinGW. - Disable implicit rules in the Makefile because we don't need them and they just make the build (imperceptibly) slower. - Enable our own strnlen() implementation not only on DJGPP but also if HAVE_STRNLEN is not defined. This is needed to get older BSDs (e.g. NetBSD 6.0, FreeBSD < 8.0) to work. - Tiny other stuff. Corresponding to flashrom svn r1917. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename programmer registration functionsCarl-Daniel Hailfinger2014-07-191-7/+5
| | | | | | | | | | | | Register_programmer suggests that we register a programmer. However, that function registers a master for a given bus type, and a programmer may support multiple masters (e.g. SPI, FWH). Rename a few other functions to be more consistent. Corresponding to flashrom svn r1831. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add 'const' keyword to chip write and other function prototypesMark Marshall2014-05-091-39/+20
| | | | | | | | | | Corresponding to flashrom svn r1789. Inspired by and mostly based on a patch Signed-off-by: Mark Marshall <mark.marshall@omicron.at> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 20Stefan Tauner2014-05-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - abit BX6 2.0 Reported by Stefan Tauner - Acer EM61SM/EM61PM (used in Acer Aspire T180) Reported by Benjamin Bellec - ADLINK Express-HR Reported by Obermair Thomas - ASUS M3N-H/HDMI Reported by Franc Serres - Attro G5G100-P Reported by Christoph Grenz - ASRock 960GM-GS3 FX Reported by Fuley Istvan - Elitegroup P6BAP-A+ (V2.2) Reported by Arnaldo Pirrone - Elitegroup GeForce7050M-M (V2.0) Reported by Leif Middelschulte - Fujitsu D3041-A1 (used in ESPRIMO P2560) Reported by Daggi Duck - GIGABYTE GA-8S648 Reported by TeslaBIOS - GIGABYTE GA-970A-D3P (rev. 1.0) Reported by Jean-Francois Pirus - GIGABYTE GA-B85M-D3H Reported by Mladen Milinković - GIGABYTE GA-X79-UD3 Reported by Jeff O'Neil - GIGABYTE GA-X79-UP4 (rev. 1.0) Reported by George Spelvin - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3) Reported by Vangelis Skarmoutsos - GIGABYTE GA-Z87-HD3 Reported by virii5 - Lenovo Tilapia CRB Reported by jenkins56 on IRC - MSI GT60-2OD (notebook, only with layout patches) Reported by Vasiliy Vylegzhanin - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid) Reported by professorll - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640) Reported by Koen Rousseau - MSI MS-7125 (K8N Neo4(-F/FI/FX)) We had a board enable for that one for years, but it was not (and still is not) completely clear which boards are covered. - MSI MS-7522 (MSI X58 Pro-E) Reported by Gianluigi Tiesi - PCWARE APM80-D3 Reported by César Augusto Jakoby - Pegatron IPP7A-CP Reported by Илья Шипко - Supermicro H8QME-2 Reported by Greg Tippitt - Supermicro X7SPA-H Reported by Kyle Bentley - Supermicro X7SPE-HF-D525 Reported by Micah Anderson - Supermicro X8DTE Reported by Mark Nipper - Supermicro X8SIL-F Reported by Peter Samuelson - ZOTAC IONITX-A (-E) version Reported by Maciej Wroniecki NOT OK: - Supermicro X10SLM-F Reported by Micah Anderson Flash chips: - Atmel AT29C020 to PREW (+PREW) It was marked like that in the past, but I could not find the reason why the test bits were reset. Urja Rannikko tested it again and it still works. - Eon EN25F10 to PREW (+PREW) Reported by Stolmár Tamás - Eon EN25QH64 to PR (+PR) Reported by Vladimir 'φ-coder' Serbinenko - GigaDevice GD25Q32(B) to PREW (+PREW) Reported by mrnuke - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW) Reported by Jamie Nichol - Macronix MX25L2005(C) to PREW (+PREW) Reported by Давыдов Дмитрий - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW) Reported by Paolo Zambotti - Pmc Pm25LD010(C) to PREW (+PREW) Reported by Vasile Ceteras - Micron/Numonyx/ST M25P16 to PREW (+EW) Reported by raven - Micron/Numonyx/ST M25PX64 to PREW (+W) Reported by Zaolin - SST SST25VF020B to PREW (+PREW) Reported by Michaël Zweers - SST SST49LF040 to PREW (+W) Reported by Oskar Enoksson - Add support for MX25L3273E (evil twin of MX25L3205 et al.) Also, add MX25L1673 and MX25L6473E to the names of their twins and add a note about MX25L8073E. - Winbond W25X32 to PREW (+REW) Reported by The Raven - Winbond W29C010 etc. to PREW (+W) Reported by san Chipsets tested OK: - Intel NM70 (8086:1e5f) Reported by mrnuke - Intel C204 (8086:1c54) Reported by Vasiliy Vylegzhanin - Intel QM67 (8086:1c4f) Reported by Obermair Thomas - Intel HM77 (8086:1e57) Reported by Vasiliy Vylegzhanin - Intel B85 (8086:8c50) Reported by Mladen Milinković - Intel HM87 (8086:8c4b) Reported by Vasiliy Vylegzhanin - Intel Z87 (8086:8c44) Reported by virii5 - NVIDIA MCP51 (10de:0261) Reported by Marcin Kościelnicki - SiS 648 (1039:0648) Reported by TeslaBIOS Miscellaneous: - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_). - getrevision.sh: Ignore failing date calls. - getrevision.sh: Fix -u and -l for older git versions which require = for the git log grep parameter. - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas. - Add "-p internal" to output that requests users to send flashrom -V logs. - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist. - Tiny other stuff. Corresponding to flashrom svn r1783. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 18Stefan Tauner2013-07-251-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS C60M1-I http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html - ASUS P8H77-I http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - ASUS P8H77-M http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html - ASUS P8P67 LE (B2) http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html - Elitegroup GeForce6100PM-M2 (V3.0) http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html - GIGABYTE GA-P55A-UD7 http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html - MSI B75MA-E33 (MS-7808) http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - MSI H77MA-G43 (MS-7756) http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html - MSI KA780G (MS-7551) http://paste.flashrom.org/view.php?id=1617 - SAPPHIRE IPC-E350M1 Reported by xvilka on IRC - Supermicro X8DTG-D http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html NOT OK: - ASRock Fatal1ty Z77 Performance http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html - ASRock Z68 Extreme4 http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html - ASUS P8B75-M LE http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html - ASUS P8P67-M PRO http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html - ASUS P8Z68-V LE http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html - Intel DQ77MK http://paste.flashrom.org/view.php?id=1603 - Supermicro X9DRD-7LN4F http://paste.flashrom.org/view.php?id=1582 - Supermicro X9SCE-F http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html - Supermicro X9SCM-F http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html - Tyan S7066 http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html Chipsets: - Marked Intel B75 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - Marked Intel H77 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - Removed 10de:03e2 because it is apparently the MCP61 host bridge. It was reclassified to Host Bridge in the PCI device ID database and there is at least one report suggesting this configuration too: http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html - Added MCP89 which hopefully works with the code for previous versions. Thanks to James Laird for submitting this change. Tested flash chips: - Atmel AT25DF641(A) to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html - Atmel AT25F512 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html Also, change its ID according to Modification of PCN SC040401A: "There has been a change in the returned value of the Product Identification (RDID) command, the AT25F512A RDID code is 65h compared to 60h from the AT25F512 product." It seems to be quite likely that all AT25F512 are fully functional relabeled AT25F1024 chips. There are even some hints in the datasheet: in table 6 they stress that address pin 16 needs to be low under all circum- stances; while continuous reads can wrap around on the AT25F1024 the DS notes "For the AT25F512, the read command must be terminated when the highest address (00FFFF) is reached." OTOH the lock bit semantics are different, but this has not been tested thoroughly - Atmel AT25F512A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1569 - Eon EN25F05 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1571 - Macronix MX25L12805(D) to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html - Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P) Tested by Stefan Tauner - Micron/Numonyx/ST M25PX80 to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P) Tested by Stefan Tauner - SST SST25VF040B to PREW (+PREW) http://paste.flashrom.org/view.php?id=1574 - SST SST25VF040B.REMS to PREW (+EW) http://paste.flashrom.org/view.php?id=1575 - ST M25P05-A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1576 - ST M29W512B to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html - Winbond W25Q64.W to PREW (+PREW) Tested by the chromiumos guys. - Winbond W25Q128.V to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html - Winbond W25X20 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html Miscellaneous: - Add Lenovo X201 to the laptop whitelist. - Add chip IDs for the ESMT F25L..QA family. - Add chip IDs for a few Macronix MX25 models. - The list of flashchips is not sorted strictly alphabetically and should not be either. Refine the comment explaining the scheme on top of the list. - Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb). - Use z length modifier in (more) prints for size_t types. - Remove chips >16MB again because our current implementation of memory mapping the flash chip violates common rules by mapping a window as large as the chip. This leads to failing mmaps as can be seen here: http://paste.flashrom.org/view.php?id=1695 - Document spispeed parameter of linux_spi (and fix some leaks). - Rephrase the "multiple chips detected" message because it was confusing. - Skip verification step if the image is equal to the flash contents. - Tiny other stuff. Corresponding to flashrom svn r1702. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Uintptr_t-ify map_flash_region functionsStefan Tauner2013-07-171-3/+3
| | | | | | | | | | | | | | | | | | | Unsigned long is not the right type for manipulating pointer values. Since C99 there are suitable unsigned and signed types available, namely uintptr_t and intptr_t respectively. Use them in functions assigned to programmers' map_flash_region fields and their callers where applicable. This patch also changes the display width of all associated address values in physmap.c to 16/8 hex characters depending on the actual size by introducing a macro PRIxPTR_WIDTH and exploiting printf's * field width specifier. Corresponding to flashrom svn r1701. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use uintptr_t for chipaddr instead of unsigned longStefan Tauner2013-07-131-8/+8
| | | | | | | Corresponding to flashrom svn r1698. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix duplicate 'const' declaration specifiersStefan Tauner2013-01-151-1/+1
| | | | | | | | | | Thanks to Idwer and clang for noticing these problems. Corresponding to flashrom svn r1646. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix a memleak in the dummyflasherStefan Tauner2012-09-221-2/+3
| | | | | | | | | | | Emu_persistent_image was not freed correctly. This bug was found thanks to valgrind. Corresponding to flashrom svn r1603. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add RES/REMS support to all dummyflasher emulated chips as a test caseCarl-Daniel Hailfinger2012-08-301-10/+47
| | | | | | | | | | Fix a few odd corner cases in RES/REMS support in dummyflasher emulation which became noticeable once RES/REMS was used heavily. Corresponding to flashrom svn r1589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Let the programmer driver decide how to do AAI transfersNico Huber2012-06-151-0/+1
| | | | | | | | | | | | | | | | Currently spi_aai_write() is implemented without an abstraction mechanism for the programmer driver. This adds another function pointer 'write_aai' to struct spi_programmer, which is set to default_spi_write_aai (renamed spi_aai_write) for all programmers for now. A patch which utilises this abstraction in the dediprog driver will follow. Corresponding to flashrom svn r1543. Signed-off-by: Nico Huber <nico.huber@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dummyflasher.c: add support for SFDP by adding a new emulator chip: MX25L6436Stefan Tauner2012-05-071-11/+98
| | | | | | | | | | | The chip features a complete 1.0 SFDP JEDEC flash parameter table and also a vendor-specific extension table (defining voltages, lock bits etc). NB: the MX25L6436 uses the same RDID as the MX25L6405. Corresponding to flashrom svn r1534. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dummyflasher: Add a status register to SPI chipsStefan Tauner2012-05-061-10/+56
| | | | | | | Corresponding to flashrom svn r1532. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 10Paul Menzel2012-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ABIT A-S78H http://www.flashrom.org/pipermail/flashrom/2012-January/008603.html - ASRock AM2NF6G-VSTA http://www.flashrom.org/pipermail/flashrom/2012-January/008534.html - ASUS KFSN4-DRE/SAS reported by ted on IRC - ASUS M2A-VM (HDMI variant) http://www.flashrom.org/pipermail/flashrom/2012-January/008509.html - ASUS M4N78 PRO http://www.flashrom.org/pipermail/flashrom/2012-January/008598.html - ASUS P5K-V http://www.flashrom.org/pipermail/flashrom/2012-February/008737.html - ASUS P5KPL-CM http://www.flashrom.org/pipermail/flashrom/2012-January/008522.html - ASUS P5N7A-VM http://www.flashrom.org/pipermail/flashrom/2012-January/008508.html - ASUS P5QPL-AM http://www.flashrom.org/pipermail/flashrom/2012-January/008557.html - ECS GF7100PVT-M3 http://www.flashrom.org/pipermail/flashrom/2011-December/008412.html - ECS K7SEM http://www.flashrom.org/pipermail/flashrom/2011-December/008362.html - ECS P4M800PRO-M V2.0 http://www.flashrom.org/pipermail/flashrom/2012-January/008478.html - Gigabyte 880GMA-USB3 http://www.flashrom.org/pipermail/flashrom/2012-February/008715.html - Gigabyte GA-EP31-DS3L http://www.flashrom.org/pipermail/flashrom/2012-January/008601.html - Gigabyte GA-X58A-UDR3 http://www.flashrom.org/pipermail/flashrom/2012-January/008572.html - Gigabyte GA-Z68XP-UD3 http://paste.flashrom.org/view.php?id=1058 - HP ProLiant N40L http://www.flashrom.org/pipermail/flashrom/2012-February/008650.html - MSI MS-7309 (K9N6PGM2-V2) http://www.flashrom.org/pipermail/flashrom/2011-December/008441.html - MSI MS-7548 (Aspen-GL8E used in HP Pavilion a6750f) http://www.flashrom.org/pipermail/flashrom/2012-February/008666.html - MSI MS-7676 (H67MA-ED55(B3)) http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html - PC Engines Alix.6f2 Reported by Philip Prindeville on IRC - Shuttle AV18E2 http://www.flashrom.org/pipermail/flashrom/2011-December/008459.html - Supermicro X8DTE-F http://www.flashrom.org/pipermail/flashrom/2011-November/008304.html - Supermicro X8DTT-HIBQF http://www.flashrom.org/pipermail/flashrom/2012-January/008520.html NOT OK: - ASUS P8H61-M LE/USB3 http://www.flashrom.org/pipermail/flashrom/2012-January/008491.html - ASUS P8H67-M PRO http://www.flashrom.org/pipermail/flashrom/2011-December/008321.html - ASUS P8Z68-V PRO http://www.flashrom.org/pipermail/flashrom/2012-January/008469.html - Clevo P150HM (laptop) http://www.flashrom.org/pipermail/flashrom/2012-February/008717.html - Intel D425KT http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html - Supermicro X9SCA-F http://www.flashrom.org/pipermail/flashrom/2011-December/008313.html Tested flash chips: - mark AT29C512 as TEST_OK_PREW http://paste.flashrom.org/view.php?id=977 - mark M25P40 as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-December/008351.html - mark M25PE80 as TEST_OK_PREW http://paste.flashrom.org/view.php?id=1061 - mark MX25L6405 as TEST_OK_PREW tested myself with an MX25L6436E variant on serprog - mark W39V080A as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2012-January/008509.html Tested chipsets: - SiS 730 (:0730) http://www.flashrom.org/pipermail/flashrom/2011-December/008362.html - NVIDIA MCP61 (:03e0) http://www.flashrom.org/pipermail/flashrom/2012-January/008534.html - NVIDIA MCP73 (:07d7) http://www.flashrom.org/pipermail/flashrom/2011-December/008412.html - NVIDIA MCP79 (:0aac) http://www.flashrom.org/pipermail/flashrom/2012-January/008508.html - VIA VT82C69x (0691) and VT82C686A/B (:0686) http://www.flashrom.org/pipermail/flashrom/2011-December/008459.html - AMD's SB950 (and presumably also SB920) have the same PCI ID as previous generations, hence change the chipset enable device string. Thanks to Christian Ruppert for the suggestion. - Fix the board enable of the abit NF-M2 nView which had the IDs of its onboard graphics card in its pattern. Change this to the LPC controller. - Intel X79 SPI registers are identical to 6 Series', so use the chipsetenable wrapper of it (enable_flash_pch6). - Fix two paranoid checks for address < 0 in ichspi.c which became futile (and generate clang warnings) with the unsignify patch committed in r1470. - Rename AT25DF641 to AT25DF641(A). They are almost idencical, but could be distinguished by an extended RDID probe (Atmel's patented EDI procedure), which we do not support yet, hence handle them as one model for now. - Source format fixes and typos Corresponding to flashrom svn r1499. the addition of the ASRock AM2NF6G-VSTA to print.c is Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> everything else is Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Workaround missing %hhx support in MinGW sscanfCarl-Daniel Hailfinger2012-02-161-2/+12
| | | | | | | | | | MinGW uses standard Windows C libraries and those apparently don't support %hhx for sscanf into a uint8_t. SCNx8 isn't available either. Corresponding to flashrom svn r1495. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* SPI command black-/ignorelisting for the flash chip emulator in the dummy ↵Carl-Daniel Hailfinger2012-02-081-3/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | programmer Usage: flashrom -p dummy:spi_blacklist=commandlist flashrom -p dummy:spi_ignorelist=commandlist If commandlist is 0302, flashrom will refuse (blacklist) or ignore (ignorelist) command 0x03 (READ) and command 0x02 (WRITE). The commandlist can be up to 512 bytes (256 commands) long. Specifying flash chip emulation is a good idea to get useful results. Very useful for testing corner cases if you don't own a locked down Intel chipset and want to simulate such a thing. Example usage: dd if=/dev/zeros bs=1024k count=4 of=dummy_simulator.rom dd if=/dev/urandom bs=1024k count=4 of=randomimage.rom flashrom -p dummy:emulate=SST25VF032B,image=dummy_simulator.rom,\ spi_blacklist=20,spi_ignorelist=52 -w randomimage.rom -V Corresponding to flashrom svn r1490. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-14/+44
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-13/+13
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Register Parallel/LPC/FWH programmers the same way SPI programmers are ↵Carl-Daniel Hailfinger2011-11-091-6/+27
| | | | | | | | | | | | | | | | | | | | registered All programmers are now calling programmer registration functions and direct manipulations of buses_supported are not needed/possible anymore. Note: Programmers without parallel/LPC/FWH chip support should not call register_par_programmer(). Additional fixes: Set max_rom_decode.parallel for drkaiser. Remove abuse of programmer_map_flash_region in it85spi. Annotate several FIXMEs in it85spi. Corresponding to flashrom svn r1463. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-2/+2
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-11/+12
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Rename CHIP_BUSTYPE_FOO to BUS_FOOCarl-Daniel Hailfinger2011-07-271-5/+5
| | | | | | | | | It's shorter to type, and we have less problems with the 80 column limit. Corresponding to flashrom svn r1396. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-15/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to resolve some programmer shutdown ordering issues by having the programmer init functions register shutdown callbacks explicitly wherever it makes most sense. Before, assumptions were made that could lead to the internal programmer's state changing before the external programmer could be shut down properly. Now, each programmer cleans up after itself and (hopefully) performs each operation in the correct order. As a side-effect, this patch gives us a better usage model for reverse operations such as rpci_* and rmmio_*. In the long-run, this should make reversing the initialization process easier to understand, less tedious, and less error-prone. In short, this patch does the following: - Registers a shutdown callback during initialization for each programmer. - Kills the .shutdown function pointer from programmer_entry struct. Also, make most shutdown functions static. - Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls). TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff) Corresponding to flashrom svn r1338. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Kill central list of SPI programmersMichael Karcher2011-05-111-4/+16
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-6/+0
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Improve debugging for unaligned erase in the flash chip emulatorCarl-Daniel Hailfinger2011-02-041-12/+6
| | | | | | | | | Fix out-of-bounds access for chip erase in the flash chip emulator. Corresponding to flashrom svn r1259. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Support setting the Dediprog SF100 SPI voltageCarl-Daniel Hailfinger2010-11-091-7/+0
| | | | | | | | | | | Add a generic voltage parameter parser. Move tolower_string() from dummyflasher.c to flashrom.c to make it available everywhere. Corresponding to flashrom svn r1226. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coreboot.org>
* Add SPI flash emulation capability to the dummy programmerCarl-Daniel Hailfinger2010-11-011-11/+367
| | | | | | | | | | | | | | | | | | | | | | | | | | You have to choose between - no emulation - ST M25P10.RES SPI flash chip (RES, page write) - SST SST25VF040.REMS SPI flash chip (REMS, byte write) - SST SST25VF032B SPI flash chip (RDID, AAI write) Example usage: flashrom -p dummy:emulate=SST25VF032B Flash image persistence is available as well. Example usage: flashrom -p dummy:image=dummy_simulator.rom Allow setting the max chunksize for page write with the dummy programmer. Example usage: flashrom -p dummy:spi_write_256_chunksize=5 Flash emulation is compiled in by default. This code helped me find and fix various bugs in the SPI write code as well as in the testsuite. Corresponding to flashrom svn r1220. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Remove duplicate includes from the codeStefan Reinauer2010-10-061-1/+0
| | | | | | | Corresponding to flashrom svn r1196. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use generic unlocking infrastructure for SPI chipsCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | Actually check if the unlock worked instead of just assuming it worked. Corresponding to flashrom svn r1082. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial writeCarl-Daniel Hailfinger2010-07-141-0/+9
| | | | | | | | | | However, wrap the write functions in a compat layer to allow converting the rest of flashrom later. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unify programmer parameter extractionCarl-Daniel Hailfinger2010-07-081-1/+1
| | | | | | | | | | | Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-16/+18
| | | | | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add SPI chip read support to the dummy flasherCarl-Daniel Hailfinger2010-06-201-0/+8
| | | | | | | | | This allows using the dummy flasher for SPI read debugging. Corresponding to flashrom svn r1053. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* More NetBSD fixes (w/ patch)Jonathan A. Kollasch2010-02-161-1/+2
| | | | | | | | | | | | | Cast input to tolower() to unsigned char to work around how tolower() is implemented on NetBSD. Also, use CPPFLAGS (rather than overriding CFLAGS) for the NetBSD/DragonFly build example. Corresponding to flashrom svn r905. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert dummyflasher to msg_* and make good use of msg_pspewCarl-Daniel Hailfinger2010-01-091-29/+29
| | | | | | | | | | | | | | | Rule of thumb: Diagnostic programmer init messages are msg_pdbg, all other debug stuff (except warnings, which should be pmsg_pinfo or msg_perr) is msg_pspew. This makes "flashrom -p dummy -V" output a whole lot more readable (try it!). In case someone wants the full barfed output, it is possible to specify -VV instead of -V. Corresponding to flashrom svn r842. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use a common parameter variable for all programmersCarl-Daniel Hailfinger2009-08-121-14/+12
| | | | | | | | | | This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Corresponding to flashrom svn r679. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Remove unnecessary #include filesCarl-Daniel Hailfinger2009-08-091-3/+0
| | | | | | | | | | Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Corresponding to flashrom svn r671. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add SPI multicommand infrastructureCarl-Daniel Hailfinger2009-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPI opcodes need to be sent in direct succession after each other without any chip deselect happening in between. A prominent example is WREN (Write Enable) directly before PP (Page Program). Intel calls the first opcode in such a row "preopcode". Right now, we ignore the direct succession requirement completely and it works pretty well because most onboard SPI masters have a timing or heuristics which make the problem disappear. The FT2232 SPI flasher is different. Since it is an external flasher, timing is very different to what we can expect from onboard flashers and this leads to failure at slow speeds. This patch allows any function to submit multiple SPI commands in a stream to any flasher. Support in the individual flashers isn't implemented yet, so there is one generic function which passes the each command in the stream one-by-one to the command functions of the selected SPI flash driver. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r645. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Sometimes we want to read/write more than 4 bytes of chip content at onceCarl-Daniel Hailfinger2009-06-051-0/+20
| | | | | | | | | | | | | | | | | | | | Add chip_{read,write}n to the external flasher infrastructure which read/write n bytes at once. Fix a few places where the code used memcpy/memcmp although that is strictly impossible with external flashers. Place a FIXME in the layout.c code because usage is not totally clear and needs to be fixed to support external flashers. As a nice side benefit, we get a noticeable speedup for builtin flash reading which is now a memcpy() of the full flash area instead of a series of single-byte reads. Corresponding to flashrom svn r579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix a bug in dummyflasher.c special case where no type parameter is givenCarl-Daniel Hailfinger2009-06-051-1/+1
| | | | | | | Corresponding to flashrom svn r577. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Mark 3COM "3C905B: Cyclone 10/100/BNC" as fully testedUwe Hermann2009-06-021-1/+1
| | | | | | | | | Also do some random cleanups while I'm at it. Corresponding to flashrom svn r567. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add bus type support to the dummy external programmerCarl-Daniel Hailfinger2009-06-011-1/+37
| | | | | | | | | | | | | | | The syntax is explained in the man page. Example: flashrom -p dummy=lpc,fwh Tested, works perfectly. ;-) As a nice benefit, it allows easy testing of the "probe only compatible flashes" patch. Corresponding to flashrom svn r559. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add bus type annotation to struct flashchipsCarl-Daniel Hailfinger2009-05-311-1/+1
| | | | | | | | | | | | | | | | | | | Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-2/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Introduce a type "chipaddr" to abstract the offsets within flash regionsCarl-Daniel Hailfinger2009-05-161-12/+12
| | | | | | | | | | | | | | | | | | | Use chipaddr instead of volatile uint8_t * because when we access chips in external flashers, they are not accessed via pointers at all. Benefits: This allows us to differentiate between volatile machine memory accesses and flash chip accesses. It also enforces usage of chip_{read,write}[bwl] to access flash chips, so nobody will unintentionally use pointers to access chips anymore. Some unneeded casts are removed as well. Grepping for chip operations and machine memory operations doesn't yield any false positives anymore. Compile tested on 32 bit and 64 bit Linux. Corresponding to flashrom svn r519. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a dummy SPI controller driver, similar to the dummy LPC/FWH/Parallel ↵Carl-Daniel Hailfinger2009-05-141-0/+21
| | | | | | | | | | | | | | | | | flasher driver Does not support reading or writing the fake chip yet. flashrom --programmer dummy also enables the dummy SPI controller driver. Testing the dummy SPI driver revealed a RDID debug printing bug in the SPI core. Fix that as well. Corresponding to flashrom svn r507. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
OpenPOWER on IntegriCloud