| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1291.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1290.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.
WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).
Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379
Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It is extremely unlikely that a chip not requiring delays in probe does
require them in erase. We observed unreliable erasing with a SST49LF004A
with these delays, so remove them if the are not required.
In review, I got the hint that "probe_jedec goes further by making that
call conditional on nonzero delay". I decided to ignore that. For
internal_delay, the small amount of clock cycles wasted for calling
programmer_delay(0) is negligible compared to LPC cycle times. It might
be an issue for 5 wasted bytes on the serial line in serprog. OTOH,
flash erase is still slow compared to 6*5 bytes on a serial port at
reasonable speed.
Corresponding to flashrom svn r1288.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As the comment indicates, that function is not a chip erase function
at all, but a function calling a block eraser in a loop. So it adds
no extra value to what we already have in the block_eraser
infrastructure.
Furthermore, that function assumes a uniform sector size layout, but
is referenced from flash chip with non-uniform sector size layout, which
is just wrong.
Corresponding to flashrom svn r1287.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported by: wickberg@student.chalmers.se
flashrom -V: http://paste.flashrom.org/view.php?id=452
lspci: http://paste.flashrom.org/view.php?id=453
(note that the flashrom dump is with a foreign chip. That
board is originally equipped with an PMC Pm49FL004.
Corresponding to flashrom svn r1286.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
| |
Success report at
http://flashrom.org/pipermail/flashrom/2011-March/006072.html
Corresponding to flashrom svn r1285.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1284.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1283.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
http://www.coreboot.org/DirectHW
Corresponding to flashrom svn r1282.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use 16-bit values for bit masks in 16-bit registers.
Check for SPI Cycle In Progress and wait up to 60 ms.
Do not touch reserved bits.
Reduce SPI cycle timeout from 60 s to 60 ms.
Clear transaction errors caused by our own SPI accesses.
Add better debugging in case the hardware misbehaves.
Corresponding to flashrom svn r1281.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix various minor compile issues (eg. include necessary standard headers)
- Fix compilation of libpayload code paths
- Provide libpayload support in Makefile
- Add make target "libflashrom.a" which links non-CLI code to static
library
Corresponding to flashrom svn r1280.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Tested-with-DOS-crosscompiler-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix a few typos.
Change the EC memory region mapping name.
Drop unused function parameter.
Use mmio_writeb()/mmio_readb() to get reliable access to volatile memory
locations instead of plain pointer access which is optimized away by gcc.
Use own it85_* SPI high-level chip read/write functions instead of
relying on unrelated ICH functions.
Corresponding to flashrom svn r1279.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David writes:
I applied the patch against the Chromium OS branch and
successfully tested read and write operations on a Cr48.
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Fix compilation if everything except CONFIG_SATAMV is no.
Do not compile in PCI support for wiki printing if no PCI devices are
supported.
Corresponding to flashrom svn r1278.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1277.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1276.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
| |
Flashrom -V -w: http://paste.flashrom.org/view.php?id=395
Corresponding to flashrom svn r1275.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Simplify pcidev_init by killing the vendorid parameter which was pretty
useless anyway since it was present in the pcidevs parameter as well.
This also allows us to handle multiple programmers with different vendor
IDs in the same driver.
Fix compilation of flashrom with only the nicrealtek driver.
Corresponding to flashrom svn r1274.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only list the memory controller PCI IDs because the only other subsystem
mentioned is used by network and sound interfaces both of which can be
turned off in BIOS.
Tested on a board rev 1.85.
Corresponding to flashrom svn r1273.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
| |
Winbond_W39V040FB as write tested
Corresponding to flashrom svn r1272.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
| |
http://www.flashrom.org/pipermail/flashrom/2010-October/005117.html
Corresponding to flashrom svn r1271.
Signed-off-by: Bernhard Geier <geierb@geierb.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Tests were performed with write and verify operations to 4 different
M25PX16 chips with a Dediprog SF100.
Corresponding to flashrom svn r1270.
Signed-off-by: Carl Worth <carl.d.worth@intel.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mark EVGA nForce 780i board as supported.
Full logs are here:
http://www.flashrom.org/pipermail/flashrom/2011-January/005779.html
Corresponding to flashrom svn r1269.
Signed-off-by: Brandon Dowdy <brandonrd7@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1268.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1267.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Gigabyte is not really helpful with their PCI IDs for us, the subsystem
IDs used just mean "gigabyte northbridge" and "gigabyte southbridge".
We should investigate whether autodetection of this board is causing
interference with other boards.
real version 2: Extend list of PCI IDs for nvidia southbridges.
flashrom -V: http://paste.flashrom.org/view.php?id=326
lspic: http://paste.flashrom.org/view.php?id=328
superiotool: http://paste.flashrom.org/view.php?id=329
Corresponding to flashrom svn r1266.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported by: Michal Janke <jankeso@gmail.com>
flashrom -V: http://paste.flashrom.org/view.php?id=370
lspci: http://paste.flashrom.org/view.php?id=371
superiotool: http://paste.flashrom.org/view.php?id=372 and
http://www.flashrom.org/pipermail/flashrom/2011-March/005878.html
Corresponding to flashrom svn r1265.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Successfully tested MSI MS-7596 (785GM-E51).
Successfully tested ASRock 890GX Extreme3.
Successfully tested Winbond W25x80.
Mention which GIGABYTE GA-MA78G-DS3H board revision was tested.
Corresponding to flashrom svn r1264.
Signed-off-by: Yul Rottmann <yulrottmann@bitel.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
flashrom-chromium tree
This code has been deployed and tested to work on the Cr-48.
There are a few caveats, though:
- The boot BIOS straps register must be modified to select LPC. This
can be done with the "select_bbs.sh" script (Install iotools at
http://code.google.com/p/iotools/ before using select_bbs).
- It is very important to disable power management daemons before
running flashrom on this EC. I commented out the brute force method
we use in the Chromium OS branch that disables powerd, since IIRC
Carl-Daniel has a better approach in the works.
- Due to dependencies which may be introduced by the OEM/ODM EC
firmware, the code is not guaranteed to work for anything other than
the Cr-48.
Corresponding to flashrom svn r1263.
Signed-off-by: David Hendricks <dhendrix@google.com>
Carl-Daniel comments:
Code is not hooked up yet because probing needs to be sorted out.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The patch was developed by Google.
It was tested for IT8500E on a Chrome OS platform and may require
modification depending on ODM/OEM customization and EC firmware version.
This patch is not officially supported by ITE Tech Inc.
Corresponding to flashrom svn r1262.
Signed-off-by: Donald Huang <donald.huang@ite.com.tw>
Signed-off-by: Yung-chieh Lo <yjlou@google.com>
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add more sanity checks for BARs and abort if resources are unreachable.
Undecoded resources are reported, but flashrom will proceed anyway just
in case the BIOS screwed up the configuration.
(The empty CardBus handler is intentional, according to the spec no BARs
in PCI config space are used by CardBus.)
Found while working on a driver for the Angelbird PCIe-based SSD which
has 64-bit capable MEM BARs.
Corresponding to flashrom svn r1261.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add support for AMD Am29LV001BB, Am29LV001BT, Am29LV002BB, Am29LV002BT,
Am29LV004BB, Am29LV004BT, Am29LV008BB, Am29LV008BT.
Thanks to Mark Pustjens for testing the Am29LV001BB.
Corresponding to flashrom svn r1260.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
| |
Fix out-of-bounds access for chip erase in the flash chip emulator.
Corresponding to flashrom svn r1259.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It uses a Marvell 88SX7042 SATA controller internally which has access
to a separate flash chip hosting the option ROM.
Thanks to Angelbird Ltd for sponsoring development of this driver!
I expect the code to work for that SATA controller even if it is not
part of the Angelbird SSD.
Corresponding to flashrom svn r1258.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1257.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Mathias Krause <mathias.krause@secunet.com>
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes wrong escaping of %.
In print.c %%2b is correct instead of \%2b ("%%2b"=%2b=+)
In board_enable.c %d is correct instead of \%d.
Corresponding to flashrom svn r1256.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes the "using plain integer as NULL pointer" warnings
generated by running sparse on the flashrom source.
Corresponding to flashrom svn r1255.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement all Dediprog commands found in USB traces, even if their
purpose is not yet known.
Annotate unknown commands with info about the call sequence they are
embedded in and the firmware version of the log.
Add a new shutdown command for firmware 5.x (of which Stefan thinks it's
"switch the Pass light on" hence it is called late in the game)
Corresponding to flashrom svn r1254.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <reinauer@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't print the local memory flash chip address on programmers that
don't actually map the flash chip into local memory (like the dediprog)
because the value does not make sense there.
This version was reworked / rewritten by Mathias Krause to have less
"impact"
Corresponding to flashrom svn r1253.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Mathias Krause <mathias.krause@secunet.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch reduces the stack usage by declaring 'const' stack variables
as 'static const' so they end up in the .rodata section instead of being
copied from there to the stack for every invocation of the corresponding
function.
As a plus we end up in having a smaller binary as the "copy from .rodata
to stack" code isn't emitted by the compiler any more (roughly -100
bytes).
Corresponding to flashrom svn r1252.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
write/erase operations
Also bit 5 is the Erase/Program Error (EPE) bit, so has nothing to do
with the block protection. Ignore it when testing for block protections.
Corresponding to flashrom svn r1251.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Tested-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
|
| |
The address part was using a bit of the size, the size was missing the
upper bit, was off by 1023 bytes and included the protection bits.
Corresponding to flashrom svn r1250.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This corrects a djgpp build error, seen with r1232 and later.
pcidev.c:210: error: conflicting types for 'rpci_write_long'
programmer.h:226: error: previous declaration of 'rpci_write_long' was here
Corresponding to flashrom svn r1249.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
| |
Add code for the unlocking (erasing/writing) of Winbond W39V040FB
chips, enabling erasing/writing this type of chip.
Corresponding to flashrom svn r1248.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
Corresponding to flashrom svn r1247.
|
|
|
|
|
|
|
|
|
| |
Suggested by Michael Karcher.
Corresponding to flashrom svn r1246.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Print lock status for all supported Winbond W39* chips:
W39V040A, W39V040B, W39V040C, W39V040FA, W39V040FB, W39V040FC,
W39V080A, W39V080FA, W39V080FA (dual mode).
Fill in correct probe timing for Winbond W39V040C and W39V080FA.
Please note that the W39V040B/W39V040FB pair has identical IDs,
identical read/write/erase, but locking differs. Same applies to
W39V040C/W39V040FC. This causes double detection on chipsets which
support LPC and FWH, making flashing more difficult because the user
has to select the correct chip. This is called the evil twin problem.
A better evil twin handling (patch available) will resolve that problem.
Corresponding to flashrom svn r1245.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
| |
Update a few comments and messages to improve readability.
Corresponding to flashrom svn r1244.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1243.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
| |
Am29F016D, Am29F040B, Am29LV040B, Am29LV081B, A29002B, A29002T, A29040B,
MX29F001B, MX29F001T, MX29F002B, MX29F002T, MX29LV040, M29F040B
Corresponding to flashrom svn r1242.
Signed-off-by: David Borg <borg.db@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|