diff options
Diffstat (limited to 'spi25.c')
-rw-r--r-- | spi25.c | 40 |
1 files changed, 36 insertions, 4 deletions
@@ -856,6 +856,7 @@ int spi_write_status_enable(void) static int spi_write_status_register_ewsr(struct flashchip *flash, int status) { int result; + int i = 0; struct spi_command cmds[] = { { /* WRSR requires either EWSR or WREN depending on chip type. */ @@ -879,15 +880,31 @@ static int spi_write_status_register_ewsr(struct flashchip *flash, int status) if (result) { msg_cerr("%s failed during command execution\n", __func__); + /* No point in waiting for the command to complete if execution + * failed. + */ + return result; } - /* WRSR performs a self-timed erase before the changes take effect. */ + /* WRSR performs a self-timed erase before the changes take effect. + * This may take 50-85 ms in most cases, and some chips apparently + * allow running RDSR only once. Therefore pick an initial delay of + * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. + */ programmer_delay(100 * 1000); - return result; + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) { + if (++i > 490) { + msg_cerr("Error: WIP bit after WRSR never cleared\n"); + return TIMEOUT_ERROR; + } + programmer_delay(10 * 1000); + } + return 0; } static int spi_write_status_register_wren(struct flashchip *flash, int status) { int result; + int i = 0; struct spi_command cmds[] = { { /* WRSR requires either EWSR or WREN depending on chip type. */ @@ -911,10 +928,25 @@ static int spi_write_status_register_wren(struct flashchip *flash, int status) if (result) { msg_cerr("%s failed during command execution\n", __func__); + /* No point in waiting for the command to complete if execution + * failed. + */ + return result; } - /* WRSR performs a self-timed erase before the changes take effect. */ + /* WRSR performs a self-timed erase before the changes take effect. + * This may take 50-85 ms in most cases, and some chips apparently + * allow running RDSR only once. Therefore pick an initial delay of + * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. + */ programmer_delay(100 * 1000); - return result; + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) { + if (++i > 490) { + msg_cerr("Error: WIP bit after WRSR never cleared\n"); + return TIMEOUT_ERROR; + } + programmer_delay(10 * 1000); + } + return 0; } static int spi_write_status_register(struct flashchip *flash, int status) |