summaryrefslogtreecommitdiffstats
path: root/spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'spi.c')
-rw-r--r--spi.c238
1 files changed, 15 insertions, 223 deletions
diff --git a/spi.c b/spi.c
index cba6942..5cfc052 100644
--- a/spi.c
+++ b/spi.c
@@ -2,7 +2,6 @@
* This file is part of the flashrom project.
*
* Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
- * Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,158 +28,8 @@
#include "flash.h"
#include "spi.h"
-#define ITE_SUPERIO_PORT1 0x2e
-#define ITE_SUPERIO_PORT2 0x4e
-
-
-uint16_t it8716f_flashport = 0;
-/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
-int fast_spi = 1;
void spi_prettyprint_status_register(struct flashchip *flash);
-void spi_disable_blockprotect(void);
-
-/* Generic Super I/O helper functions */
-uint8_t regval(uint16_t port, uint8_t reg)
-{
- outb(reg, port);
- return inb(port + 1);
-}
-
-void regwrite(uint16_t port, uint8_t reg, uint8_t val)
-{
- outb(reg, port);
- outb(val, port + 1);
-}
-
-/* Helper functions for most recent ITE IT87xx Super I/O chips */
-#define CHIP_ID_BYTE1_REG 0x20
-#define CHIP_ID_BYTE2_REG 0x21
-static void enter_conf_mode_ite(uint16_t port)
-{
- outb(0x87, port);
- outb(0x01, port);
- outb(0x55, port);
- if (port == ITE_SUPERIO_PORT1)
- outb(0x55, port);
- else
- outb(0xaa, port);
-}
-
-static void exit_conf_mode_ite(uint16_t port)
-{
- regwrite(port, 0x02, 0x02);
-}
-
-static uint16_t find_ite_spi_flash_port(uint16_t port)
-{
- uint8_t tmp = 0;
- uint16_t id, flashport = 0;
-
- enter_conf_mode_ite(port);
-
- id = regval(port, CHIP_ID_BYTE1_REG) << 8;
- id |= regval(port, CHIP_ID_BYTE2_REG);
-
- /* TODO: Handle more IT87xx if they support flash translation */
- if (id == 0x8716) {
- /* NOLDN, reg 0x24, mask out lowest bit (suspend) */
- tmp = regval(port, 0x24) & 0xFE;
- printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
- 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
- printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
- 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
- printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
- 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
- printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
- 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
- printf("LPC write to serial flash %sabled\n",
- (tmp & 1 << 4) ? "en" : "dis");
- printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
- /* LDN 0x7, reg 0x64/0x65 */
- regwrite(port, 0x07, 0x7);
- flashport = regval(port, 0x64) << 8;
- flashport |= regval(port, 0x65);
- }
- exit_conf_mode_ite(port);
- return flashport;
-}
-
-int it87xx_probe_spi_flash(const char *name)
-{
- it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1);
- if (!it8716f_flashport)
- it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2);
- return (!it8716f_flashport);
-}
-
-/* The IT8716F only supports commands with length 1,2,4,5 bytes including
- command byte and can not read more than 3 bytes from the device.
- This function expects writearr[0] to be the first byte sent to the device,
- whereas the IT8716F splits commands internally into address and non-address
- commands with the address in inverse wire order. That's why the register
- ordering in case 4 and 5 may seem strange. */
-static int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
-{
- uint8_t busy, writeenc;
- int i;
-
- do {
- busy = inb(it8716f_flashport) & 0x80;
- } while (busy);
- if (readcnt > 3) {
- printf("%s called with unsupported readcnt %i.\n",
- __FUNCTION__, readcnt);
- return 1;
- }
- switch (writecnt) {
- case 1:
- outb(writearr[0], it8716f_flashport + 1);
- writeenc = 0x0;
- break;
- case 2:
- outb(writearr[0], it8716f_flashport + 1);
- outb(writearr[1], it8716f_flashport + 7);
- writeenc = 0x1;
- break;
- case 4:
- outb(writearr[0], it8716f_flashport + 1);
- outb(writearr[1], it8716f_flashport + 4);
- outb(writearr[2], it8716f_flashport + 3);
- outb(writearr[3], it8716f_flashport + 2);
- writeenc = 0x2;
- break;
- case 5:
- outb(writearr[0], it8716f_flashport + 1);
- outb(writearr[1], it8716f_flashport + 4);
- outb(writearr[2], it8716f_flashport + 3);
- outb(writearr[3], it8716f_flashport + 2);
- outb(writearr[4], it8716f_flashport + 7);
- writeenc = 0x3;
- break;
- default:
- printf("%s called with unsupported writecnt %i.\n",
- __FUNCTION__, writecnt);
- return 1;
- }
- /* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
- * Note:
- * We can't use writecnt directly, but have to use a strange encoding.
- */
- outb(((0x4 + (fast_spi ? 1 : 0)) << 4) | ((readcnt & 0x3) << 2) | (writeenc), it8716f_flashport);
-
- if (readcnt > 0) {
- do {
- busy = inb(it8716f_flashport) & 0x80;
- } while (busy);
-
- for (i = 0; i < readcnt; i++) {
- readarr[i] = inb(it8716f_flashport + 5 + i);
- }
- }
-
- return 0;
-}
int spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
{
@@ -390,28 +239,13 @@ int spi_sector_erase(const struct flashchip *flash, unsigned long addr)
return 0;
}
-/* Page size is usually 256 bytes */
-void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) {
- int i;
-
- spi_write_enable();
- outb(0x06 , it8716f_flashport + 1);
- outb(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
- for (i = 0; i < 256; i++) {
- bios[256 * block + i] = buf[256 * block + i];
- }
- outb(0, it8716f_flashport);
- /* Wait until the Write-In-Progress bit is cleared.
- * This usually takes 1-10 ms, so wait in 1 ms steps.
- */
- while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
- usleep(1000);
-}
-
void spi_page_program(int block, uint8_t *buf, uint8_t *bios)
{
- if (it8716f_flashport)
+ if (it8716f_flashport) {
it8716f_spi_page_program(block, buf, bios);
+ return;
+ }
+ printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__);
}
/*
@@ -452,29 +286,7 @@ void spi_disable_blockprotect(void)
}
}
-/*
- * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
- * Program chip using firmware cycle byte programming. (SLOW!)
- */
-int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf)
-{
- int total_size = 1024 * flash->total_size;
- int i;
- fast_spi = 0;
-
- spi_disable_blockprotect();
- for (i = 0; i < total_size; i++) {
- spi_write_enable();
- spi_byte_program(i, buf[i]);
- while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
- myusec_delay(10);
- }
- /* resume normal ops... */
- outb(0x20, it8716f_flashport);
- return 0;
-}
-
-void spi_3byte_read(int address, uint8_t *bytes, int len)
+void spi_nbyte_read(int address, uint8_t *bytes, int len)
{
const unsigned char cmd[JEDEC_READ_OUTSIZE] = {JEDEC_READ,
(address >> 16) & 0xff,
@@ -486,39 +298,19 @@ void spi_3byte_read(int address, uint8_t *bytes, int len)
spi_command(JEDEC_READ_OUTSIZE, len, cmd, bytes);
}
-/*
- * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
- * Need to read this big flash using firmware cycles 3 byte at a time.
- */
int spi_chip_read(struct flashchip *flash, uint8_t *buf)
{
- int total_size = 1024 * flash->total_size;
- int i;
- fast_spi = 0;
-
- if (total_size > 512 * 1024) {
- for (i = 0; i < total_size; i += 3) {
- int toread = 3;
- if (total_size - i < toread)
- toread = total_size - i;
- spi_3byte_read(i, buf + i, toread);
- }
- } else {
- memcpy(buf, (const char *)flash->virtual_memory, total_size);
- }
- return 0;
+ if (it8716f_flashport)
+ return it8716f_spi_chip_read(flash, buf);
+ printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__);
+ return 1;
}
-int spi_chip_write(struct flashchip *flash, uint8_t *buf) {
- int total_size = 1024 * flash->total_size;
- int i;
- if (total_size > 512 * 1024) {
- it8716f_over512k_spi_chip_write(flash, buf);
- } else {
- for (i = 0; i < total_size / 256; i++) {
- spi_page_program(i, buf, (uint8_t *)flash->virtual_memory);
- }
- }
- return 0;
+int spi_chip_write(struct flashchip *flash, uint8_t *buf)
+{
+ if (it8716f_flashport)
+ return it8716f_spi_chip_write(flash, buf);
+ printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__);
+ return 1;
}
OpenPOWER on IntegriCloud