summaryrefslogtreecommitdiffstats
path: root/rayer_spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'rayer_spi.c')
-rw-r--r--rayer_spi.c122
1 files changed, 122 insertions, 0 deletions
diff --git a/rayer_spi.c b/rayer_spi.c
new file mode 100644
index 0000000..37cf752
--- /dev/null
+++ b/rayer_spi.c
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2009,2010 Carl-Daniel Hailfinger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Driver for the SPIPGM hardware by "RayeR" Martin Rehak.
+ * See http://rayer.ic.cz/elektro/spipgm.htm for schematics and instructions.
+ */
+
+/* This driver uses non-portable direct I/O port accesses which won't work on
+ * any non-x86 platform, and even on x86 there is a high chance there will be
+ * collisions with any loaded parallel port drivers.
+ * The big advantage of direct port I/O is OS independence and speed because
+ * most OS parport drivers will perform many unnecessary accesses although
+ * this driver just treats the parallel port as a GPIO set.
+ */
+#if defined(__i386__) || defined(__x86_64__)
+
+#include "flash.h"
+
+/* We have two sets of pins, out and in. The numbers for both sets are
+ * independent and are bitshift values, not real pin numbers.
+ */
+/* Pins for master->slave direction */
+#define SPI_CS_PIN 5
+#define SPI_SCK_PIN 6
+#define SPI_MOSI_PIN 7
+/* Pins for slave->master direction */
+#define SPI_MISO_PIN 6
+
+static int lpt_iobase;
+
+/* FIXME: All rayer_bitbang_set_* functions could use caching of the value
+ * stored at port lpt_iobase to avoid unnecessary INB. In theory, only one
+ * INB(lpt_iobase) would be needed on programmer init to get the initial
+ * value.
+ */
+
+void rayer_bitbang_set_cs(int val)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase);
+ tmp &= ~(1 << SPI_CS_PIN);
+ tmp |= (val << SPI_CS_PIN);
+ OUTB(tmp, lpt_iobase);
+}
+
+void rayer_bitbang_set_sck(int val)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase);
+ tmp &= ~(1 << SPI_SCK_PIN);
+ tmp |= (val << SPI_SCK_PIN);
+ OUTB(tmp, lpt_iobase);
+}
+
+void rayer_bitbang_set_mosi(int val)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase);
+ tmp &= ~(1 << SPI_MOSI_PIN);
+ tmp |= (val << SPI_MOSI_PIN);
+ OUTB(tmp, lpt_iobase);
+}
+
+int rayer_bitbang_get_miso(void)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase + 1);
+ tmp = (tmp >> SPI_MISO_PIN) & 0x1;
+ return tmp;
+}
+
+static const struct bitbang_spi_master bitbang_spi_master_rayer = {
+ .type = BITBANG_SPI_MASTER_RAYER,
+ .set_cs = rayer_bitbang_set_cs,
+ .set_sck = rayer_bitbang_set_sck,
+ .set_mosi = rayer_bitbang_set_mosi,
+ .get_miso = rayer_bitbang_get_miso,
+};
+
+int rayer_spi_init(void)
+{
+ /* Pick a default value for now. */
+ lpt_iobase = 0x378;
+
+ msg_pdbg("Using port 0x%x as I/O base for parallel port access.\n",
+ lpt_iobase);
+
+ get_io_perms();
+
+ /* 1 usec halfperiod delay for now. */
+ if (bitbang_spi_init(&bitbang_spi_master_rayer, 1))
+ return 1;
+
+ buses_supported = CHIP_BUSTYPE_SPI;
+ spi_controller = SPI_CONTROLLER_RAYER;
+
+ return 0;
+}
+
+#else
+#error PCI port I/O access is not supported on this architecture yet.
+#endif
OpenPOWER on IntegriCloud