diff options
Diffstat (limited to 'nicnatsemi.c')
| -rw-r--r-- | nicnatsemi.c | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/nicnatsemi.c b/nicnatsemi.c index c3b93d9..89a0bf4 100644 --- a/nicnatsemi.c +++ b/nicnatsemi.c @@ -43,6 +43,14 @@ int nicnatsemi_init(void) buses_supported = CHIP_BUSTYPE_PARALLEL; + /* The datasheet shows address lines MA0-MA16 in one place and MA0-MA15 + * in another. My NIC has MA16 connected to A16 on the boot ROM socket + * so I'm assuming it is accessible. If not then next line wants to be + * max_rom_decode.parallel = 65536; and the mask in the read/write + * functions below wants to be 0x0000FFFF. + */ + max_rom_decode.parallel = 131072; + return 0; } @@ -55,7 +63,7 @@ int nicnatsemi_shutdown(void) void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr) { - OUTL((uint32_t)addr & 0x0000FFFF, io_base_addr + BOOT_ROM_ADDR); + OUTL((uint32_t)addr & 0x0001FFFF, io_base_addr + BOOT_ROM_ADDR); /* * The datasheet requires 32 bit accesses to this register, but it seems * that requirement might only apply if the register is memory mapped. @@ -69,7 +77,7 @@ void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr) uint8_t nicnatsemi_chip_readb(const chipaddr addr) { - OUTL(((uint32_t)addr & 0x0000FFFF), io_base_addr + BOOT_ROM_ADDR); + OUTL(((uint32_t)addr & 0x0001FFFF), io_base_addr + BOOT_ROM_ADDR); /* * The datasheet requires 32 bit accesses to this register, but it seems * that requirement might only apply if the register is memory mapped. |
