summaryrefslogtreecommitdiffstats
path: root/it87spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'it87spi.c')
-rw-r--r--it87spi.c20
1 files changed, 10 insertions, 10 deletions
diff --git a/it87spi.c b/it87spi.c
index c7bbb13..fb2f794 100644
--- a/it87spi.c
+++ b/it87spi.c
@@ -331,7 +331,7 @@ static int it8716f_spi_page_program(struct flashctx *flash, uint8_t *buf,
/* FIXME: The command below seems to be redundant or wrong. */
OUTB(0x06, it8716f_flashport + 1);
OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
- for (i = 0; i < flash->page_size; i++)
+ for (i = 0; i < flash->chip->page_size; i++)
mmio_writeb(buf[i], (void *)(bios + start + i));
OUTB(0, it8716f_flashport);
/* Wait until the Write-In-Progress bit is cleared.
@@ -355,7 +355,7 @@ static int it8716f_spi_chip_read(struct flashctx *flash, uint8_t *buf,
* the mainboard does not use IT87 SPI translation. This should be done
* via a programmer parameter for the internal programmer.
*/
- if ((flash->total_size * 1024 > 512 * 1024)) {
+ if ((flash->chip->total_size * 1024 > 512 * 1024)) {
spi_read_chunked(flash, buf, start, len, 3);
} else {
mmio_readn((void *)(flash->virtual_memory + start), buf, len);
@@ -367,6 +367,7 @@ static int it8716f_spi_chip_read(struct flashctx *flash, uint8_t *buf,
static int it8716f_spi_chip_write_256(struct flashctx *flash, uint8_t *buf,
unsigned int start, unsigned int len)
{
+ const struct flashchip *chip = flash->chip;
/*
* IT8716F only allows maximum of 512 kb SPI chip size for memory
* mapped access. It also can't write more than 1+3+256 bytes at once,
@@ -377,28 +378,27 @@ static int it8716f_spi_chip_write_256(struct flashctx *flash, uint8_t *buf,
* the mainboard does not use IT87 SPI translation. This should be done
* via a programmer parameter for the internal programmer.
*/
- if ((flash->total_size * 1024 > 512 * 1024) ||
- (flash->page_size > 256)) {
+ if ((chip->total_size * 1024 > 512 * 1024) || (chip->page_size > 256)) {
spi_chip_write_1(flash, buf, start, len);
} else {
unsigned int lenhere;
- if (start % flash->page_size) {
+ if (start % chip->page_size) {
/* start to the end of the page or to start + len,
* whichever is smaller.
*/
- lenhere = min(len, flash->page_size - start % flash->page_size);
+ lenhere = min(len, chip->page_size - start % chip->page_size);
spi_chip_write_1(flash, buf, start, lenhere);
start += lenhere;
len -= lenhere;
buf += lenhere;
}
- while (len >= flash->page_size) {
+ while (len >= chip->page_size) {
it8716f_spi_page_program(flash, buf, start);
- start += flash->page_size;
- len -= flash->page_size;
- buf += flash->page_size;
+ start += chip->page_size;
+ len -= chip->page_size;
+ buf += chip->page_size;
}
if (len)
spi_chip_write_1(flash, buf, start, len);
OpenPOWER on IntegriCloud