diff options
Diffstat (limited to 'ichspi.c')
| -rw-r--r-- | ichspi.c | 50 |
1 files changed, 49 insertions, 1 deletions
@@ -103,6 +103,8 @@ /* ICH SPI configuration lock-down. May be set during chipset enabling. */ int ichspi_lock = 0; +uint32_t ichspi_bbar = 0; + typedef struct _OPCODE { uint8_t opcode; //This commands spi opcode uint8_t spi_type; //This commands spi type @@ -327,6 +329,34 @@ int program_opcodes(OPCODES * op) return 0; } +/* + * Try to set BBAR (BIOS Base Address Register), but read back the value in case + * it didn't stick. + */ +void ich_set_bbar(uint32_t minaddr) +{ + switch (spi_controller) { + case SPI_CONTROLLER_ICH7: + mmio_writel(minaddr, spibar + 0x50); + ichspi_bbar = mmio_readl(spibar + 0x50); + /* We don't have any option except complaining. */ + if (ichspi_bbar != minaddr) + msg_perr("Setting BBAR failed!\n"); + break; + case SPI_CONTROLLER_ICH9: + mmio_writel(minaddr, spibar + 0xA0); + ichspi_bbar = mmio_readl(spibar + 0xA0); + /* We don't have any option except complaining. */ + if (ichspi_bbar != minaddr) + msg_perr("Setting BBAR failed!\n"); + break; + default: + /* Not sure if BBAR actually exists on VIA. */ + msg_pdbg("Setting BBAR is not implemented for VIA yet.\n"); + break; + } +} + /* This function generates OPCODES from or programs OPCODES to ICH according to * the chipset's SPI configuration lock. * @@ -341,13 +371,18 @@ int ich_init_opcodes(void) return 0; if (ichspi_lock) { - msg_pdbg("Generating OPCODES... "); + msg_pdbg("Reading OPCODES... "); curopcodes_done = &O_EXISTING; rc = generate_opcodes(curopcodes_done); } else { msg_pdbg("Programming OPCODES... "); curopcodes_done = &O_ST_M25P; rc = program_opcodes(curopcodes_done); + /* Technically not part of opcode init, but it allows opcodes + * to run without transaction errors by setting the lowest + * allowed address to zero. + */ + ich_set_bbar(0); } if (rc) { @@ -743,6 +778,19 @@ int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { addr = (writearr[1] << 16) | (writearr[2] << 8) | (writearr[3] << 0); + switch (spi_controller) { + case SPI_CONTROLLER_ICH7: + case SPI_CONTROLLER_ICH9: + if (addr < ichspi_bbar) { + msg_perr("%s: Address 0x%06x below allowed " + "range 0x%06x-0xffffff\n", __func__, + addr, ichspi_bbar); + return SPI_INVALID_ADDRESS; + } + break; + default: + break; + } } /* translate read/write array/count */ |
