summaryrefslogtreecommitdiffstats
path: root/ichspi.c
diff options
context:
space:
mode:
Diffstat (limited to 'ichspi.c')
-rw-r--r--ichspi.c99
1 files changed, 79 insertions, 20 deletions
diff --git a/ichspi.c b/ichspi.c
index bb6007e..c26366e 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -30,6 +30,7 @@
* ST M25P32 already tested
* ST M25P64
* AT 25DF321 already tested
+ * ... and many more SPI flash devices
*
*/
@@ -197,8 +198,76 @@ static OPCODES O_ST_M25P = {
}
};
+/* List of opcodes with their corresponding spi_type
+ * It is used to reprogram the chipset OPCODE table on-the-fly if an opcode
+ * is needed which is currently not in the chipset OPCODE table
+ */
+static OPCODE POSSIBLE_OPCODES[] = {
+ {JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Write Byte
+ {JEDEC_READ, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Data
+ {JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Erase Sector
+ {JEDEC_RDSR, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read Device Status Reg
+ {JEDEC_REMS, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Electronic Manufacturer Signature
+ {JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Write Status Register
+ {JEDEC_RDID, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read JDEC ID
+ {JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Bulk erase
+ {JEDEC_SE, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Sector erase
+ {JEDEC_BE_52, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Block erase
+ {JEDEC_AAI_WORD_PROGRAM, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Auto Address Increment
+};
+
static OPCODES O_EXISTING = {};
+static uint8_t lookup_spi_type(uint8_t opcode)
+{
+ int a;
+
+ for (a = 0; a < sizeof(POSSIBLE_OPCODES)/sizeof(POSSIBLE_OPCODES[0]); a++) {
+ if (POSSIBLE_OPCODES[a].opcode == opcode)
+ return POSSIBLE_OPCODES[a].spi_type;
+ }
+
+ return 0xFF;
+}
+
+static int reprogram_opcode_on_the_fly(uint8_t opcode, unsigned int writecnt, unsigned int readcnt)
+{
+ uint8_t spi_type;
+
+ spi_type = lookup_spi_type(opcode);
+ if (spi_type > 3) {
+ /* Try to guess spi type from read/write sizes.
+ * The following valid writecnt/readcnt combinations exist:
+ * writecnt = 4, readcnt >= 0
+ * writecnt = 1, readcnt >= 0
+ * writecnt >= 4, readcnt = 0
+ * writecnt >= 1, readcnt = 0
+ * writecnt >= 1 is guaranteed for all commands.
+ */
+ if (readcnt == 0)
+ /* if readcnt=0 and writecount >= 4, we don't know if it is WRITE_NO_ADDRESS
+ * or WRITE_WITH_ADDRESS. But if we use WRITE_NO_ADDRESS and the first 3 data
+ * bytes are actual the address, they go to the bus anyhow
+ */
+ spi_type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
+ else if (writecnt == 1) // and readcnt is > 0
+ spi_type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
+ else if (writecnt == 4) // and readcnt is > 0
+ spi_type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
+ // else we have an invalid case, will be handled below
+ }
+ if (spi_type <= 3) {
+ int oppos=2; // use original JEDEC_BE_D8 offset
+ curopcodes->opcode[oppos].opcode = opcode;
+ curopcodes->opcode[oppos].spi_type = spi_type;
+ program_opcodes(curopcodes);
+ oppos = find_opcode(curopcodes, opcode);
+ msg_pdbg ("on-the-fly OPCODE (0x%02X) re-programmed, op-pos=%d\n", opcode, oppos);
+ return oppos;
+ }
+ return -1;
+}
+
static int find_opcode(OPCODES *op, uint8_t opcode)
{
int a;
@@ -710,11 +779,12 @@ int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt,
/* find cmd in opcodes-table */
opcode_index = find_opcode(curopcodes, cmd);
if (opcode_index == -1) {
- /* FIXME: Reprogram opcodes if possible. Autodetect type of
- * opcode by checking readcnt/writecnt.
- */
- msg_pdbg("Invalid OPCODE 0x%02x\n", cmd);
- return SPI_INVALID_OPCODE;
+ if (!ichspi_lock)
+ opcode_index = reprogram_opcode_on_the_fly(cmd, writecnt, readcnt);
+ if (opcode_index == -1) {
+ msg_pdbg("Invalid OPCODE 0x%02x\n", cmd);
+ return SPI_INVALID_OPCODE;
+ }
}
opcode = &(curopcodes->opcode[opcode_index]);
@@ -827,21 +897,10 @@ int ich_spi_send_multicommand(struct spi_command *cmds)
* No need to bother with fixups.
*/
if (!ichspi_lock) {
- msg_pdbg("%s: FIXME: Add on-the-fly"
- " reprogramming of the "
- "chipset opcode list.\n",
- __func__);
- /* FIXME: Reprogram opcode menu.
- * Find a less-useful opcode, replace it
- * with the wanted opcode, detect optype
- * and reprogram the opcode menu.
- * Update oppos so the next if-statement
- * can do something useful.
- */
- //curopcodes.opcode[lessusefulindex] = (cmds + 1)->writearr[0]);
- //update_optypes(curopcodes);
- //program_opcodes(curopcodes);
- //oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]);
+ oppos = reprogram_opcode_on_the_fly((cmds + 1)->writearr[0], (cmds + 1)->writecnt, (cmds + 1)->readcnt);
+ if (oppos == -1)
+ continue;
+ curopcodes->opcode[oppos].atomic = preoppos + 1;
continue;
}
}
OpenPOWER on IntegriCloud