diff options
Diffstat (limited to 'flashrom.8.tmpl')
| -rw-r--r-- | flashrom.8.tmpl | 26 |
1 files changed, 14 insertions, 12 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 8b5f98c..26ea6e9 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -203,10 +203,9 @@ JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \ Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA), TUMPA Lite, and GOEPEL PicoTAP. .sp -.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \ -including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \ -Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo, and \ -atmegaXXu2-flasher by Stefan Tauner." +.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog, \ +including Arduino-based devices as well as various programmers by Urja Rannikko, \ +Juhana Helovuo, Stefan Tauner and others)." .sp .BR "* buspirate_spi" " (for SPI flash ROMs attached to a Bus Pirate)" .sp @@ -683,19 +682,22 @@ parameter with the syntax. .SS .BR "serprog " programmer -A mandatory parameter specifies either a serial -device/baud combination or an IP/port combination for communication with the -programmer. In the device/baud combination, the device has to start with a -slash. For serial, you have to use the +A mandatory parameter specifies either a serial device (and baud rate) or an IP/port combination for +communicating with the programmer. +The device/baud combination has to start with +.B dev= +and separate the optional baud rate with a colon. +For example .sp -.B " flashrom \-p serprog:dev=/dev/device:baud" +.B " flashrom \-p serprog:dev=/dev/ttyS0:115200" .sp -syntax and for IP, you have to use +If no baud rate is given the default values by the operating system/hardware will be used. +For IP connections you have to use the .sp .B " flashrom \-p serprog:ip=ipaddr:port" .sp -instead. In case the device supports it, you can set the SPI clock frequency -with the optional +syntax. +In case the device supports it, you can set the SPI clock frequency with the optional .B spispeed parameter. The frequency is parsed as hertz, unless an .BR M ", or " k |
