summaryrefslogtreecommitdiffstats
path: root/chipset_enable.c
diff options
context:
space:
mode:
Diffstat (limited to 'chipset_enable.c')
-rw-r--r--chipset_enable.c123
1 files changed, 96 insertions, 27 deletions
diff --git a/chipset_enable.c b/chipset_enable.c
index 333d79d..3994023 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -4,6 +4,7 @@
* Copyright (C) 2000 Silicon Integrated System Corporation
* Copyright (C) 2005-2009 coresystems GmbH
* Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2007,2008,2009 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -301,48 +302,92 @@ static int enable_flash_ich_dc(struct pci_dev *dev, const char *name)
uint32_t fwh_conf;
int i;
char *idsel = NULL;
+ int tmp;
+ int max_decode_fwh_idsel = 0;
+ int max_decode_fwh_decode = 0;
+ int contiguous = 1;
- /* Ignore all legacy ranges below 1 MB. */
+ if (programmer_param)
+ idsel = strstr(programmer_param, "fwh_idsel=");
+
+ if (idsel) {
+ idsel += strlen("fwh_idsel=");
+ fwh_conf = (uint32_t)strtoul(idsel, NULL, 0);
+
+ /* FIXME: Need to undo this on shutdown. */
+ printf("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf);
+ pci_write_long(dev, 0xd0, fwh_conf);
+ pci_write_word(dev, 0xd4, fwh_conf);
+ /* FIXME: Decode settings are not changed. */
+ }
+
+ /* Ignore all legacy ranges below 1 MB.
+ * We currently only support flashing the chip which responds to
+ * IDSEL=0. To support IDSEL!=0, flashbase and decode size calculations
+ * have to be adjusted.
+ */
/* FWH_SEL1 */
fwh_conf = pci_read_long(dev, 0xd0);
- for (i = 7; i >= 0; i--)
+ for (i = 7; i >= 0; i--) {
+ tmp = (fwh_conf >> (i * 4)) & 0xf;
printf_debug("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
(0x1ff8 + i) * 0x80000,
(0x1ff0 + i) * 0x80000,
- (fwh_conf >> (i * 4)) & 0xf);
+ tmp);
+ if ((tmp == 0) && contiguous) {
+ max_decode_fwh_idsel = (8 - i) * 0x80000;
+ } else {
+ contiguous = 0;
+ }
+ }
/* FWH_SEL2 */
fwh_conf = pci_read_word(dev, 0xd4);
- for (i = 3; i >= 0; i--)
+ for (i = 3; i >= 0; i--) {
+ tmp = (fwh_conf >> (i * 4)) & 0xf;
printf_debug("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
(0xff4 + i) * 0x100000,
(0xff0 + i) * 0x100000,
- (fwh_conf >> (i * 4)) & 0xf);
+ tmp);
+ if ((tmp == 0) && contiguous) {
+ max_decode_fwh_idsel = (8 - i) * 0x100000;
+ } else {
+ contiguous = 0;
+ }
+ }
+ contiguous = 1;
/* FWH_DEC_EN1 */
fwh_conf = pci_read_word(dev, 0xd8);
- for (i = 7; i >= 0; i--)
+ for (i = 7; i >= 0; i--) {
+ tmp = (fwh_conf >> (i + 0x8)) & 0x1;
printf_debug("\n0x%08x/0x%08x FWH decode %sabled",
(0x1ff8 + i) * 0x80000,
(0x1ff0 + i) * 0x80000,
- (fwh_conf >> (i + 0x8)) & 0x1 ? "en" : "dis");
- for (i = 3; i >= 0; i--)
+ tmp ? "en" : "dis");
+ if ((tmp == 0) && contiguous) {
+ max_decode_fwh_decode = (8 - i) * 0x80000;
+ } else {
+ contiguous = 0;
+ }
+ }
+ for (i = 3; i >= 0; i--) {
+ tmp = (fwh_conf >> i) & 0x1;
printf_debug("\n0x%08x/0x%08x FWH decode %sabled",
(0xff4 + i) * 0x100000,
(0xff0 + i) * 0x100000,
- (fwh_conf >> i) & 0x1 ? "en" : "dis");
-
- if (programmer_param)
- idsel = strstr(programmer_param, "fwh_idsel=");
-
- if (idsel) {
- idsel += strlen("fwh_idsel=");
- fwh_conf = (uint32_t)strtoul(idsel, NULL, 0);
-
- /* FIXME: Need to undo this on shutdown. */
- printf("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf);
- pci_write_long(dev, 0xd0, fwh_conf);
- pci_write_word(dev, 0xd4, fwh_conf);
+ tmp ? "en" : "dis");
+ if ((tmp == 0) && contiguous) {
+ max_decode_fwh_decode = (8 - i) * 0x100000;
+ } else {
+ contiguous = 0;
+ }
}
+ max_rom_decode.fwh = min(max_decode_fwh_idsel, max_decode_fwh_decode);
+ printf_debug("\nMaximum FWH chip size: 0x%x bytes", max_rom_decode.fwh);
+ /* If we're called by enable_flash_ich_dc_spi, it will override
+ * buses_supported anyway.
+ */
+ buses_supported = CHIP_BUSTYPE_FWH;
return enable_flash_ich(dev, name, 0xdc);
}
@@ -355,6 +400,7 @@ static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name)
{
uint32_t mmio_base;
+ /* Do we really need no write enable? */
mmio_base = (pci_read_long(dev, 0xbc)) << 8;
printf_debug("MMIO base at = 0x%x\n", mmio_base);
spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70);
@@ -409,8 +455,7 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name,
*/
if (ich_generation == 7 && bbs == ICH_STRAP_LPC) {
- /* Not sure if it speaks LPC as well. */
- buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH;
+ buses_supported = CHIP_BUSTYPE_FWH;
/* No further SPI initialization required */
return ret;
}
@@ -422,16 +467,14 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name,
spibar_offset = 0x3020;
break;
case 8:
- /* Not sure if it speaks LPC as well. */
- buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
+ buses_supported = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_ICH9;
spibar_offset = 0x3020;
break;
case 9:
case 10:
default: /* Future version might behave the same */
- /* Not sure if it speaks LPC as well. */
- buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
+ buses_supported = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_ICH9;
spibar_offset = 0x3800;
break;
@@ -612,14 +655,22 @@ static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
#define DECODE_CONTROL_REG2 0x5b /* F0 index 0x5b */
#define ROM_AT_LOGIC_CONTROL_REG 0x52 /* F0 index 0x52 */
+#define CS5530_RESET_CONTROL_REG 0x44 /* F0 index 0x44 */
+#define CS5530_USB_SHADOW_REG 0x43 /* F0 index 0x43 */
#define LOWER_ROM_ADDRESS_RANGE (1 << 0)
#define ROM_WRITE_ENABLE (1 << 1)
#define UPPER_ROM_ADDRESS_RANGE (1 << 2)
#define BIOS_ROM_POSITIVE_DECODE (1 << 5)
+#define CS5530_ISA_MASTER (1 << 7)
+#define CS5530_ENABLE_SA2320 (1 << 2)
+#define CS5530_ENABLE_SA20 (1 << 6)
+ buses_supported = CHIP_BUSTYPE_PARALLEL;
/* Decode 0x000E0000-0x000FFFFF (128 KB), not just 64 KB, and
* decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 KB.
+ * FIXME: Should we really touch the low mapping below 1 MB? Flashrom
+ * ignores that region completely.
* Make the configured ROM areas writable.
*/
reg8 = pci_read_byte(dev, ROM_AT_LOGIC_CONTROL_REG);
@@ -633,6 +684,24 @@ static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
reg8 |= BIOS_ROM_POSITIVE_DECODE;
pci_write_byte(dev, DECODE_CONTROL_REG2, reg8);
+ reg8 = pci_read_byte(dev, CS5530_RESET_CONTROL_REG);
+ if (reg8 & CS5530_ISA_MASTER) {
+ /* We have A0-A23 available. */
+ max_rom_decode.parallel = 16 * 1024 * 1024;
+ } else {
+ reg8 = pci_read_byte(dev, CS5530_USB_SHADOW_REG);
+ if (reg8 & CS5530_ENABLE_SA2320) {
+ /* We have A0-19, A20-A23 available. */
+ max_rom_decode.parallel = 16 * 1024 * 1024;
+ } else if (reg8 & CS5530_ENABLE_SA20) {
+ /* We have A0-19, A20 available. */
+ max_rom_decode.parallel = 2 * 1024 * 1024;
+ } else {
+ /* A20 and above are not active. */
+ max_rom_decode.parallel = 1024 * 1024;
+ }
+ }
+
return 0;
}
OpenPOWER on IntegriCloud