summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Makefile16
-rw-r--r--flash.h14
-rw-r--r--flashrom.810
-rw-r--r--flashrom.c24
-rw-r--r--rayer_spi.c122
-rw-r--r--spi.c9
6 files changed, 193 insertions, 2 deletions
diff --git a/Makefile b/Makefile
index 96de0ae..290b9e6 100644
--- a/Makefile
+++ b/Makefile
@@ -111,8 +111,15 @@ CONFIG_INTERNAL ?= yes
# Always enable serprog for now. Needs to be disabled on Windows.
CONFIG_SERPROG ?= yes
-# Bitbanging SPI infrastructure is not used yet.
+# RayeR SPIPGM hardware support
+CONFIG_RAYER_SPI ?= yes
+
+# Bitbanging SPI infrastructure, default off unless needed.
+ifeq ($(CONFIG_RAYER_SPI), yes)
+override CONFIG_BITBANG_SPI = yes
+else
CONFIG_BITBANG_SPI ?= no
+endif
# Always enable 3Com NICs for now.
CONFIG_NIC3COM ?= yes
@@ -166,6 +173,13 @@ NEED_SERIAL := yes
NEED_NET := yes
endif
+ifeq ($(CONFIG_RAYER_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1'
+PROGRAMMER_OBJS += rayer_spi.o
+# Actually, NEED_PCI is wrong. NEED_IOPORT_ACCESS would be more correct.
+NEED_PCI := yes
+endif
+
ifeq ($(CONFIG_BITBANG_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1'
PROGRAMMER_OBJS += bitbang_spi.o
diff --git a/flash.h b/flash.h
index 3170efe..ca3f6f5 100644
--- a/flash.h
+++ b/flash.h
@@ -81,6 +81,9 @@ enum programmer {
#if CONFIG_DEDIPROG == 1
PROGRAMMER_DEDIPROG,
#endif
+#if CONFIG_RAYER_SPI == 1
+ PROGRAMMER_RAYER_SPI,
+#endif
PROGRAMMER_INVALID /* This must always be the last entry. */
};
@@ -129,6 +132,9 @@ void programmer_delay(int usecs);
enum bitbang_spi_master_type {
BITBANG_SPI_INVALID = 0, /* This must always be the first entry. */
+#if CONFIG_RAYER_SPI == 1
+ BITBANG_SPI_MASTER_RAYER,
+#endif
};
struct bitbang_spi_master {
@@ -531,6 +537,11 @@ int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, const u
int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);
+/* rayer_spi.c */
+#if CONFIG_RAYER_SPI == 1
+int rayer_spi_init(void);
+#endif
+
/* bitbang_spi.c */
int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod);
int bitbang_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
@@ -650,6 +661,9 @@ enum spi_controller {
#if CONFIG_DEDIPROG == 1
SPI_CONTROLLER_DEDIPROG,
#endif
+#if CONFIG_RAYER_SPI == 1
+ SPI_CONTROLLER_RAYER,
+#endif
SPI_CONTROLLER_INVALID /* This must always be the last entry. */
};
extern const int spi_programmer_count;
diff --git a/flashrom.8 b/flashrom.8
index 96aff5e..2ee22b5 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -187,6 +187,9 @@ USB SPI programmer)"
.sp
.BR "* buspirate_spi" " (for SPI flash ROMs attached to a Bus Pirate)"
.sp
+.BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport \
+based programmer)"
+.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
.B PROGRAMMER SPECIFIC INFO
@@ -389,6 +392,10 @@ where
can be any of
.BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M ", " 8M
(in Hz). The default is the maximum frequency of 8 MHz.
+.TP
+.BR "rayer_spi " programmer
+No parameters defined yet. More information about the hardware is available at
+http://rayer.ic.cz/elektro/spipgm.htm
.SH EXIT STATUS
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
@@ -411,6 +418,9 @@ needs PCI configuration space access and raw I/O port access.
.BR gfxnvidia " and " drkaiser
need PCI configuration space access and raw memory access.
.sp
+.B rayer_spi
+needs raw I/O port access.
+.sp
.B satasii
needs PCI configuration space read access and raw memory access.
.sp
diff --git a/flashrom.c b/flashrom.c
index fe173a7..a510f61 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -48,7 +48,7 @@ enum programmer programmer = PROGRAMMER_DUMMY;
* if more than one of them is selected. If only one is selected, it is clear
* that the user wants that one to become the default.
*/
-#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG > 1
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI > 1
#error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one.
#endif
enum programmer programmer =
@@ -86,6 +86,9 @@ enum programmer programmer =
#if CONFIG_DEDIPROG == 1
PROGRAMMER_DEDIPROG
#endif
+#if CONFIG_RAYER_SPI == 1
+ PROGRAMMER_RAYER_SPI
+#endif
;
#endif
@@ -391,6 +394,25 @@ const struct programmer_entry programmer_table[] = {
},
#endif
+#if CONFIG_RAYER_SPI == 1
+ {
+ .name = "rayer_spi",
+ .init = rayer_spi_init,
+ .shutdown = noop_shutdown,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .chip_readb = noop_chip_readb,
+ .chip_readw = fallback_chip_readw,
+ .chip_readl = fallback_chip_readl,
+ .chip_readn = fallback_chip_readn,
+ .chip_writeb = noop_chip_writeb,
+ .chip_writew = fallback_chip_writew,
+ .chip_writel = fallback_chip_writel,
+ .chip_writen = fallback_chip_writen,
+ .delay = internal_delay,
+ },
+#endif
+
{}, /* This entry corresponds to PROGRAMMER_INVALID. */
};
diff --git a/rayer_spi.c b/rayer_spi.c
new file mode 100644
index 0000000..37cf752
--- /dev/null
+++ b/rayer_spi.c
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2009,2010 Carl-Daniel Hailfinger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Driver for the SPIPGM hardware by "RayeR" Martin Rehak.
+ * See http://rayer.ic.cz/elektro/spipgm.htm for schematics and instructions.
+ */
+
+/* This driver uses non-portable direct I/O port accesses which won't work on
+ * any non-x86 platform, and even on x86 there is a high chance there will be
+ * collisions with any loaded parallel port drivers.
+ * The big advantage of direct port I/O is OS independence and speed because
+ * most OS parport drivers will perform many unnecessary accesses although
+ * this driver just treats the parallel port as a GPIO set.
+ */
+#if defined(__i386__) || defined(__x86_64__)
+
+#include "flash.h"
+
+/* We have two sets of pins, out and in. The numbers for both sets are
+ * independent and are bitshift values, not real pin numbers.
+ */
+/* Pins for master->slave direction */
+#define SPI_CS_PIN 5
+#define SPI_SCK_PIN 6
+#define SPI_MOSI_PIN 7
+/* Pins for slave->master direction */
+#define SPI_MISO_PIN 6
+
+static int lpt_iobase;
+
+/* FIXME: All rayer_bitbang_set_* functions could use caching of the value
+ * stored at port lpt_iobase to avoid unnecessary INB. In theory, only one
+ * INB(lpt_iobase) would be needed on programmer init to get the initial
+ * value.
+ */
+
+void rayer_bitbang_set_cs(int val)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase);
+ tmp &= ~(1 << SPI_CS_PIN);
+ tmp |= (val << SPI_CS_PIN);
+ OUTB(tmp, lpt_iobase);
+}
+
+void rayer_bitbang_set_sck(int val)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase);
+ tmp &= ~(1 << SPI_SCK_PIN);
+ tmp |= (val << SPI_SCK_PIN);
+ OUTB(tmp, lpt_iobase);
+}
+
+void rayer_bitbang_set_mosi(int val)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase);
+ tmp &= ~(1 << SPI_MOSI_PIN);
+ tmp |= (val << SPI_MOSI_PIN);
+ OUTB(tmp, lpt_iobase);
+}
+
+int rayer_bitbang_get_miso(void)
+{
+ uint8_t tmp;
+
+ tmp = INB(lpt_iobase + 1);
+ tmp = (tmp >> SPI_MISO_PIN) & 0x1;
+ return tmp;
+}
+
+static const struct bitbang_spi_master bitbang_spi_master_rayer = {
+ .type = BITBANG_SPI_MASTER_RAYER,
+ .set_cs = rayer_bitbang_set_cs,
+ .set_sck = rayer_bitbang_set_sck,
+ .set_mosi = rayer_bitbang_set_mosi,
+ .get_miso = rayer_bitbang_get_miso,
+};
+
+int rayer_spi_init(void)
+{
+ /* Pick a default value for now. */
+ lpt_iobase = 0x378;
+
+ msg_pdbg("Using port 0x%x as I/O base for parallel port access.\n",
+ lpt_iobase);
+
+ get_io_perms();
+
+ /* 1 usec halfperiod delay for now. */
+ if (bitbang_spi_init(&bitbang_spi_master_rayer, 1))
+ return 1;
+
+ buses_supported = CHIP_BUSTYPE_SPI;
+ spi_controller = SPI_CONTROLLER_RAYER;
+
+ return 0;
+}
+
+#else
+#error PCI port I/O access is not supported on this architecture yet.
+#endif
diff --git a/spi.c b/spi.c
index 2b64463..1efdae0 100644
--- a/spi.c
+++ b/spi.c
@@ -121,6 +121,15 @@ const struct spi_programmer spi_programmer[] = {
},
#endif
+#if CONFIG_RAYER_SPI == 1
+ { /* SPI_CONTROLLER_RAYER */
+ .command = bitbang_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = bitbang_spi_read,
+ .write_256 = bitbang_spi_write_256,
+ },
+#endif
+
{}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */
};
OpenPOWER on IntegriCloud