diff options
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | flash.h | 3 | ||||
| -rw-r--r-- | serial.c | 142 | ||||
| -rw-r--r-- | serprog.c | 110 |
4 files changed, 149 insertions, 110 deletions
@@ -138,6 +138,10 @@ FEATURE_CFLAGS += -D'DRKAISER_SUPPORT=1' OBJS += drkaiser.o endif +ifeq ($(CONFIG_SERPROG), yes) +OBJS += serial.o +endif + ifeq ($(CONFIG_PRINT_WIKI), yes) FEATURE_CFLAGS += -D'PRINT_WIKI_SUPPORT=1' OBJS += print_wiki.o @@ -736,8 +736,11 @@ void serprog_chip_writeb(uint8_t val, chipaddr addr); uint8_t serprog_chip_readb(const chipaddr addr); void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); void serprog_delay(int delay); + +/* serial.c */ void sp_flush_incoming(void); int sp_openserport(char *dev, unsigned int baud); +void __attribute__((noreturn)) sp_die(char *msg); extern int sp_fd; #endif /* !__FLASH_H__ */ diff --git a/serial.c b/serial.c new file mode 100644 index 0000000..e22a8fa --- /dev/null +++ b/serial.c @@ -0,0 +1,142 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2009 Urja Rannikko <urjaman@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include "flash.h" +#include <string.h> +#include <ctype.h> +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <errno.h> +#include <inttypes.h> +#include <termios.h> + +int sp_fd; + +void __attribute__((noreturn)) sp_die(char *msg) +{ + perror(msg); + exit(1); +} + +struct baudentry { + int flag; + unsigned int baud; +}; + +/* I'd like if the C preprocessor could have directives in macros */ +#define BAUDENTRY(baud) { B##baud, baud }, +static const struct baudentry sp_baudtable[] = { + BAUDENTRY(9600) + BAUDENTRY(19200) + BAUDENTRY(38400) + BAUDENTRY(57600) + BAUDENTRY(115200) +#ifdef B230400 + BAUDENTRY(230400) +#endif +#ifdef B460800 + BAUDENTRY(460800) +#endif +#ifdef B500000 + BAUDENTRY(500000) +#endif +#ifdef B576000 + BAUDENTRY(576000) +#endif +#ifdef B921600 + BAUDENTRY(921600) +#endif +#ifdef B1000000 + BAUDENTRY(1000000) +#endif +#ifdef B1152000 + BAUDENTRY(1152000) +#endif +#ifdef B1500000 + BAUDENTRY(1500000) +#endif +#ifdef B2000000 + BAUDENTRY(2000000) +#endif +#ifdef B2500000 + BAUDENTRY(2500000) +#endif +#ifdef B3000000 + BAUDENTRY(3000000) +#endif +#ifdef B3500000 + BAUDENTRY(3500000) +#endif +#ifdef B4000000 + BAUDENTRY(4000000) +#endif + {0, 0} /* Terminator */ +}; + +int sp_openserport(char *dev, unsigned int baud) +{ + struct termios options; + int fd, i; + fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY); + if (fd < 0) + sp_die("Error: cannot open serial port"); + fcntl(fd, F_SETFL, 0); + tcgetattr(fd, &options); + for (i = 0;; i++) { + if (sp_baudtable[i].baud == 0) { + close(fd); + fprintf(stderr, + "Error: cannot configure for baudrate %d\n", + baud); + exit(1); + } + if (sp_baudtable[i].baud == baud) { + cfsetispeed(&options, sp_baudtable[i].flag); + cfsetospeed(&options, sp_baudtable[i].flag); + break; + } + } + options.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS); + options.c_cflag |= (CS8 | CLOCAL | CREAD); + options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); + options.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR); + options.c_oflag &= ~OPOST; + tcsetattr(fd, TCSANOW, &options); + return fd; +} + +void sp_flush_incoming(void) +{ + int i; + for (i=0;i<100;i++) { /* In case the device doesnt do EAGAIN, just read 0 */ + unsigned char flush[16]; + ssize_t rv; + rv = read(sp_fd, flush, sizeof(flush)); + if ((rv == -1) && (errno == EAGAIN)) + break; + if (rv == -1) + sp_die("flush read"); + } + return; +} @@ -61,8 +61,6 @@ #define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */ #define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */ -int sp_fd; - static uint16_t sp_device_serbuf_size = 16; static uint16_t sp_device_opbuf_size = 300; /* Bitmap of supported commands */ @@ -95,12 +93,6 @@ static int sp_opbuf_usage = 0; whether the command is supported before doing it */ static int sp_check_avail_automatic = 0; -static void __attribute__((noreturn)) sp_die(char *msg) -{ - perror(msg); - exit(1); -} - static int sp_opensocket(char *ip, unsigned int port) { int flag = 1; @@ -130,108 +122,6 @@ static int sp_opensocket(char *ip, unsigned int port) return sock; } -struct baudentry { - int flag; - unsigned int baud; -}; - -/* I'd like if the C preprocessor could have directives in macros */ -#define BAUDENTRY(baud) { B##baud, baud }, -static const struct baudentry sp_baudtable[] = { - BAUDENTRY(9600) - BAUDENTRY(19200) - BAUDENTRY(38400) - BAUDENTRY(57600) - BAUDENTRY(115200) -#ifdef B230400 - BAUDENTRY(230400) -#endif -#ifdef B460800 - BAUDENTRY(460800) -#endif -#ifdef B500000 - BAUDENTRY(500000) -#endif -#ifdef B576000 - BAUDENTRY(576000) -#endif -#ifdef B921600 - BAUDENTRY(921600) -#endif -#ifdef B1000000 - BAUDENTRY(1000000) -#endif -#ifdef B1152000 - BAUDENTRY(1152000) -#endif -#ifdef B1500000 - BAUDENTRY(1500000) -#endif -#ifdef B2000000 - BAUDENTRY(2000000) -#endif -#ifdef B2500000 - BAUDENTRY(2500000) -#endif -#ifdef B3000000 - BAUDENTRY(3000000) -#endif -#ifdef B3500000 - BAUDENTRY(3500000) -#endif -#ifdef B4000000 - BAUDENTRY(4000000) -#endif - {0, 0} /* Terminator */ -}; - -int sp_openserport(char *dev, unsigned int baud) -{ - struct termios options; - int fd, i; - fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY); - if (fd < 0) - sp_die("Error: cannot open serial port"); - fcntl(fd, F_SETFL, 0); - tcgetattr(fd, &options); - for (i = 0;; i++) { - if (sp_baudtable[i].baud == 0) { - close(fd); - fprintf(stderr, - "Error: cannot configure for baudrate %d\n", - baud); - exit(1); - } - if (sp_baudtable[i].baud == baud) { - cfsetispeed(&options, sp_baudtable[i].flag); - cfsetospeed(&options, sp_baudtable[i].flag); - break; - } - } - options.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS); - options.c_cflag |= (CS8 | CLOCAL | CREAD); - options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); - options.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR); - options.c_oflag &= ~OPOST; - tcsetattr(fd, TCSANOW, &options); - return fd; -} - -void sp_flush_incoming(void) -{ - int i; - for (i=0;i<100;i++) { /* In case the device doesnt do EAGAIN, just read 0 */ - unsigned char flush[16]; - ssize_t rv; - rv = read(sp_fd, flush, sizeof(flush)); - if ((rv == -1) && (errno == EAGAIN)) - break; - if (rv == -1) - sp_die("flush read"); - } - return; -} - static int sp_sync_read_timeout(int loops) { int i; |
