diff options
| -rw-r--r-- | board_enable.c | 2 | ||||
| -rw-r--r-- | chipset_enable.c | 79 | ||||
| -rw-r--r-- | ichspi.c | 8 | ||||
| -rw-r--r-- | programmer.h | 2 |
4 files changed, 74 insertions, 17 deletions
diff --git a/board_enable.c b/board_enable.c index c61d72d..a6ee19f 100644 --- a/board_enable.c +++ b/board_enable.c @@ -784,7 +784,7 @@ static int via_vt823x_gpio_set(uint8_t gpio, int raise) dev = pci_dev_find_vendorclass(0x1106, 0x0601); switch (dev->device_id) { case 0x3177: /* VT8235 */ - case 0x3227: /* VT8237R */ + case 0x3227: /* VT8237/VT8237R */ case 0x3337: /* VT8237A */ break; default: diff --git a/chipset_enable.c b/chipset_enable.c index 936d7b8..39e59dd 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -6,6 +6,7 @@ * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> * Copyright (C) 2007,2008,2009 Carl-Daniel Hailfinger * Copyright (C) 2009 Kontron Modular Computers GmbH + * Copyright (C) 2011, 2012 Stefan Tauner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -508,12 +509,6 @@ static int enable_flash_tunnelcreek(struct pci_dev *dev, const char *name) return ret; } -static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name) -{ - /* Do we really need no write enable? */ - return via_init_spi(dev); -} - static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) { @@ -681,7 +676,7 @@ static int enable_flash_vt823x(struct pci_dev *dev, const char *name) return -1; } - if (dev->device_id == 0x3227) { /* VT8237R */ + if (dev->device_id == 0x3227) { /* VT8237/VT8237R */ /* All memory cycles, not just ROM ones, go to LPC. */ val = pci_read_byte(dev, 0x59); val &= ~0x80; @@ -691,6 +686,69 @@ static int enable_flash_vt823x(struct pci_dev *dev, const char *name) return 0; } +static int enable_flash_vt_vx(struct pci_dev *dev, const char *name) +{ + struct pci_dev *south_north = pci_dev_find(0x1106, 0xa353); + if (south_north == NULL) { + msg_perr("Could not find South-North Module Interface Control device!\n"); + return ERROR_FATAL; + } + + msg_pdbg("Strapped to "); + if ((pci_read_byte(south_north, 0x56) & 0x01) == 0) { + msg_pdbg("LPC.\n"); + return enable_flash_vt823x(dev, name); + } + msg_pdbg("SPI.\n"); + + uint32_t mmio_base; + void *mmio_base_physmapped; + uint32_t spi_cntl; + #define SPI_CNTL_LEN 0x08 + uint32_t spi0_mm_base = 0; + switch(dev->device_id) { + case 0x8353: /* VX800/VX820 */ + spi0_mm_base = pci_read_long(dev, 0xbc) << 8; + break; + case 0x8409: /* VX855/VX875 */ + case 0x8410: /* VX900 */ + mmio_base = pci_read_long(dev, 0xbc) << 8; + mmio_base_physmapped = physmap("VIA VX MMIO register", mmio_base, SPI_CNTL_LEN); + if (mmio_base_physmapped == ERROR_PTR) { + physunmap(mmio_base_physmapped, SPI_CNTL_LEN); + return ERROR_FATAL; + } + + /* Offset 0 - Bit 0 holds SPI Bus0 Enable Bit. */ + spi_cntl = mmio_readl(mmio_base_physmapped) + 0x00; + if ((spi_cntl & 0x01) == 0) { + msg_pdbg ("SPI Bus0 disabled!\n"); + physunmap(mmio_base_physmapped, SPI_CNTL_LEN); + return ERROR_FATAL; + } + /* Offset 1-3 has SPI Bus Memory Map Base Address: */ + spi0_mm_base = spi_cntl & 0xFFFFFF00; + + /* Offset 4 - Bit 0 holds SPI Bus1 Enable Bit. */ + spi_cntl = mmio_readl(mmio_base_physmapped) + 0x04; + if ((spi_cntl & 0x01) == 1) + msg_pdbg2("SPI Bus1 is enabled too.\n"); + + physunmap(mmio_base_physmapped, SPI_CNTL_LEN); + break; + default: + msg_perr("%s: Unsupported chipset %x:%x!\n", __func__, dev->vendor_id, dev->device_id); + return ERROR_FATAL; + } + + return via_init_spi(dev, spi0_mm_base); +} + +static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name) +{ + return via_init_spi(dev, pci_read_long(dev, 0xbc) << 8); +} + static int enable_flash_cs5530(struct pci_dev *dev, const char *name) { uint8_t reg8; @@ -1266,13 +1324,14 @@ const struct penable chipset_enables[] = { {0x1106, 0x3074, OK, "VIA", "VT8233", enable_flash_vt823x}, {0x1106, 0x3147, OK, "VIA", "VT8233A", enable_flash_vt823x}, {0x1106, 0x3177, OK, "VIA", "VT8235", enable_flash_vt823x}, - {0x1106, 0x3227, OK, "VIA", "VT8237", enable_flash_vt823x}, + {0x1106, 0x3227, OK, "VIA", "VT8237(R)", enable_flash_vt823x}, {0x1106, 0x3337, OK, "VIA", "VT8237A", enable_flash_vt823x}, {0x1106, 0x3372, OK, "VIA", "VT8237S", enable_flash_vt8237s_spi}, {0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x}, {0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x}, - {0x1106, 0x8353, OK, "VIA", "VX800/VX820", enable_flash_vt8237s_spi}, - {0x1106, 0x8409, OK, "VIA", "VX855/VX875", enable_flash_vt823x}, + {0x1106, 0x8353, NT, "VIA", "VX800/VX820", enable_flash_vt_vx}, + {0x1106, 0x8409, NT, "VIA", "VX855/VX875", enable_flash_vt_vx}, + {0x1106, 0x8410, NT, "VIA", "VX900", enable_flash_vt_vx}, {0x1166, 0x0200, OK, "Broadcom", "OSB4", enable_flash_osb4}, {0x1166, 0x0205, OK, "Broadcom", "HT-1000", enable_flash_ht1000}, {0x17f3, 0x6030, OK, "RDC", "R8610/R3210", enable_flash_rdc_r8610}, @@ -1844,14 +1844,12 @@ static const struct spi_programmer spi_programmer_via = { .write_aai = default_spi_write_aai, }; -int via_init_spi(struct pci_dev *dev) +int via_init_spi(struct pci_dev *dev, uint32_t mmio_base) { - uint32_t mmio_base; int i; - mmio_base = (pci_read_long(dev, 0xbc)) << 8; - msg_pdbg("MMIO base at = 0x%x\n", mmio_base); - ich_spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70); + ich_spibar = physmap("VIA SPI MMIO registers", mmio_base, 0x70); + /* Do we really need no write enable? Like the LPC one at D17F0 0x40 */ /* Not sure if it speaks all these bus protocols. */ internal_buses_supported = BUS_LPC | BUS_FWH; diff --git a/programmer.h b/programmer.h index a32cd79..7a301f3 100644 --- a/programmer.h +++ b/programmer.h @@ -558,7 +558,7 @@ enum ich_chipset { extern uint32_t ichspi_bbar; int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, enum ich_chipset ich_generation); -int via_init_spi(struct pci_dev *dev); +int via_init_spi(struct pci_dev *dev, uint32_t mmio_base); /* it85spi.c */ int it85xx_spi_init(struct superio s); |
