diff options
| -rw-r--r-- | chipdrivers.h | 3 | ||||
| -rw-r--r-- | flashchips.c | 14 | ||||
| -rw-r--r-- | spi.h | 2 | ||||
| -rw-r--r-- | spi25.c | 38 |
4 files changed, 43 insertions, 14 deletions
diff --git a/chipdrivers.h b/chipdrivers.h index 9537775..7339e2d 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -29,7 +29,8 @@ int probe_spi_rdid(struct flashchip *flash); int probe_spi_rdid4(struct flashchip *flash); int probe_spi_rems(struct flashchip *flash); -int probe_spi_res(struct flashchip *flash); +int probe_spi_res1(struct flashchip *flash); +int probe_spi_res2(struct flashchip *flash); int spi_write_enable(void); int spi_write_disable(void); int spi_chip_erase_60(struct flashchip *flash); diff --git a/flashchips.c b/flashchips.c index b1af60a..45f4076 100644 --- a/flashchips.c +++ b/flashchips.c @@ -4665,19 +4665,19 @@ struct flashchip flashchips[] = { /* The ST M25P05 is a bit of a problem. It has the same ID as the * ST M25P05-A in RES mode, but supports only 128 byte writes instead - * of 256 byte writes. We rely heavily on the fact that probe_spi_res + * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 * only is successful if RDID does not work. */ { .vendor = "ST", .name = "M25P05.RES", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -4723,12 +4723,12 @@ struct flashchip flashchips[] = { .vendor = "ST", .name = "M25P10.RES", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -4798,12 +4798,12 @@ struct flashchip flashchips[] = { .vendor = "ST", .name = "M25P40-old", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -27,6 +27,7 @@ /* Read Electronic ID */ #define JEDEC_RDID 0x9f #define JEDEC_RDID_OUTSIZE 0x01 +/* INSIZE may be 0x04 for some chips*/ #define JEDEC_RDID_INSIZE 0x03 /* AT25F512A has bit 3 as don't care bit in commands */ @@ -42,6 +43,7 @@ /* Read Electronic Signature */ #define JEDEC_RES 0xab #define JEDEC_RES_OUTSIZE 0x04 +/* INSIZE may be 0x02 for some chips*/ #define JEDEC_RES_INSIZE 0x01 /* Write Enable */ @@ -67,20 +67,20 @@ static int spi_rems(unsigned char *readarr) return 0; } -static int spi_res(unsigned char *readarr) +static int spi_res(unsigned char *readarr, int bytes) { unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 }; uint32_t readaddr; int ret; - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); if (ret == SPI_INVALID_ADDRESS) { /* Find the lowest even address allowed for reads. */ readaddr = (spi_get_valid_read_addr() + 1) & ~1; cmd[1] = (readaddr >> 16) & 0xff, cmd[2] = (readaddr >> 8) & 0xff, cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); } if (ret) return ret; @@ -235,13 +235,15 @@ int probe_spi_rems(struct flashchip *flash) return 0; } -int probe_spi_res(struct flashchip *flash) +int probe_spi_res1(struct flashchip *flash) { unsigned char readarr[3]; uint32_t id2; const unsigned char allff[] = {0xff, 0xff, 0xff}; const unsigned char all00[] = {0x00, 0x00, 0x00}; + /* We only want one-byte RES if RDID and REMS are unusable. */ + /* Check if RDID is usable and does not return 0xff 0xff 0xff or * 0x00 0x00 0x00. In that case, RES is pointless. */ @@ -259,12 +261,13 @@ int probe_spi_res(struct flashchip *flash) return 0; } - if (spi_res(readarr)) + if (spi_res(readarr, 1)) return 0; - /* FIXME: Handle the case where RES gives a 2-byte response. */ id2 = readarr[0]; + msg_cdbg("%s: id 0x%x\n", __func__, id2); + if (id2 != flash->model_id) return 0; @@ -275,6 +278,29 @@ int probe_spi_res(struct flashchip *flash) return 1; } +int probe_spi_res2(struct flashchip *flash) +{ + unsigned char readarr[2]; + uint32_t id1, id2; + + if (spi_res(readarr, 2)) + return 0; + + id1 = readarr[0]; + id2 = readarr[1]; + + msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); + + if (id1 != flash->manufacture_id || id2 != flash->model_id) + return 0; + + /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + return 1; +} + uint8_t spi_read_status_register(void) { const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR }; |
