diff options
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | chipset_enable.c | 56 | ||||
| -rw-r--r-- | flash.h | 2 | ||||
| -rw-r--r-- | flashrom.c | 15 |
4 files changed, 64 insertions, 11 deletions
@@ -11,7 +11,7 @@ STRIP = strip INSTALL = /usr/bin/install PREFIX = /usr/local #CFLAGS = -O2 -g -Wall -Werror -CFLAGS = -Os -Wall -Werror # -DTS5300 +CFLAGS = -Os -Wall -Werror OS_ARCH = $(shell uname) ifeq ($(OS_ARCH), SunOS) LDFLAGS = -lpci -lz diff --git a/chipset_enable.c b/chipset_enable.c index 22eceb2..e8297d6 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -35,6 +35,8 @@ #include <unistd.h> #include "flash.h" +unsigned long flashbase = 0; + /** * flashrom defaults to LPC flash devices. If a known SPI controller is found * and the SPI strappings are set, this will be overwritten by the probing code. @@ -797,6 +799,59 @@ static int enable_flash_ht1000(struct pci_dev *dev, const char *name) return 0; } +/** + * Usually on the x86 architectures (and on other PC-like platforms like some + * Alphas or Itanium) the system flash is mapped right below 4G. On the AMD + * Elan SC520 only a small piece of the system flash is mapped there, but the + * complete flash is mapped somewhere below 1G. The position can be determined + * by the BOOTCS PAR register. + */ +static int get_flashbase_sc520(struct pci_dev *dev, const char *name) +{ + int i, bootcs_found = 0; + uint32_t parx = 0; + void *mmcr; + + /* 1. Map MMCR */ + mmcr = mmap(0, getpagesize(), PROT_WRITE | PROT_READ, + MAP_SHARED, fd_mem, (off_t)0xFFFEF000); + + if (mmcr == MAP_FAILED) { + perror("Can't mmap Elan SC520 specific registers using " MEM_DEV); + exit(1); + } + + /* 2. Scan PAR0 (0x88) - PAR15 (0xc4) for + * BOOTCS region (PARx[31:29] = 100b)e + */ + for (i = 0x88; i <= 0xc4; i += 4) { + parx = *(volatile uint32_t *)(mmcr + i); + if ((parx >> 29) == 4) { + bootcs_found = 1; + break; /* BOOTCS found */ + } + } + + /* 3. PARx[25] = 1b --> flashbase[29:16] = PARx[13:0] + * PARx[25] = 0b --> flashbase[29:12] = PARx[17:0] + */ + if (bootcs_found) { + if (parx & (1 << 25)) { + parx &= (1 << 14) - 1; /* Mask [13:0] */ + flashbase = parx << 16; + } else { + parx &= (1 << 18) - 1; /* Mask [17:0] */ + flashbase = parx << 12; + } + } else { + printf("AMD Elan SC520 detected, but no BOOTCS. Assuming flash at 4G\n"); + } + + /* 4. Clean up */ + munmap (mmcr, getpagesize()); + return 0; +} + typedef struct penable { uint16_t vendor, device; const char *name; @@ -875,6 +930,7 @@ static const FLASH_ENABLE enables[] = { {0x10de, 0x0548, "NVIDIA MCP67", enable_flash_mcp55}, {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, {0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000}, + {0x1022, 0x3000, "AMD Elan SC520", get_flashbase_sc520}, }; void print_supported_chipsets(void) @@ -410,6 +410,8 @@ void print_supported_boards(void); int chipset_flash_enable(void); void print_supported_chipsets(void); +extern unsigned long flashbase; + typedef enum { BUS_TYPE_LPC, BUS_TYPE_ICH7_SPI, @@ -105,7 +105,7 @@ struct flashchip *probe_flash(struct flashchip *first_flash, int force) { volatile uint8_t *bios; struct flashchip *flash; - unsigned long flash_baseaddr = 0, size; + unsigned long size; for (flash = first_flash; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) @@ -133,16 +133,11 @@ struct flashchip *probe_flash(struct flashchip *first_flash, int force) */ size = getpagesize(); } -#ifdef TS5300 - // FIXME: Wrong place for this decision - // FIXME: This should be autodetected. It is trivial. - flash_baseaddr = 0x9400000; -#else - flash_baseaddr = (0xffffffff - size + 1); -#endif + if (!flashbase) + flashbase = (0xffffffff - size + 1); bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED, - fd_mem, (off_t) flash_baseaddr); + fd_mem, (off_t) flashbase); if (bios == MAP_FAILED) { perror("Can't mmap memory using " MEM_DEV); exit(1); @@ -167,7 +162,7 @@ notfound: return NULL; printf("Found chip \"%s %s\" (%d KB) at physical address 0x%lx.\n", - flash->vendor, flash->name, flash->total_size, flash_baseaddr); + flash->vendor, flash->name, flash->total_size, flashbase); return flash; } |
