diff options
| -rw-r--r-- | chipdrivers.h | 2 | ||||
| -rw-r--r-- | flashchips.c | 14 | ||||
| -rw-r--r-- | spi.h | 10 | ||||
| -rw-r--r-- | spi25.c | 80 |
4 files changed, 102 insertions, 4 deletions
diff --git a/chipdrivers.h b/chipdrivers.h index 1ef4959..f110807 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -41,7 +41,9 @@ int probe_spi_res2(struct flashctx *flash); int spi_write_enable(struct flashctx *flash); int spi_write_disable(struct flashctx *flash); int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_50(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_52(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen); diff --git a/flashchips.c b/flashchips.c index 8558ac8..937abd3 100644 --- a/flashchips.c +++ b/flashchips.c @@ -1795,18 +1795,24 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 256, /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { + .eraseblocks = { {256, 2048} }, + .block_erase = spi_block_erase_81, + }, { + .eraseblocks = { {2 * 1024, 256} }, + .block_erase = spi_block_erase_50, + }, { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, } - }, - .write = NULL /* Incompatible Page write */, - .read = spi_chip_read, + }, /* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */ + .write = spi_chip_write_1, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ }, @@ -76,11 +76,21 @@ #define JEDEC_CE_C7_OUTSIZE 0x01 #define JEDEC_CE_C7_INSIZE 0x00 +/* Block Erase 0x50 is supported by Atmel AT26DF chips. */ +#define JEDEC_BE_50 0x50 +#define JEDEC_BE_50_OUTSIZE 0x04 +#define JEDEC_BE_50_INSIZE 0x00 + /* Block Erase 0x52 is supported by SST and old Atmel chips. */ #define JEDEC_BE_52 0x52 #define JEDEC_BE_52_OUTSIZE 0x04 #define JEDEC_BE_52_INSIZE 0x00 +/* Block Erase 0x81 is supported by Atmel AT26DF chips. */ +#define JEDEC_BE_81 0x81 +#define JEDEC_BE_81_OUTSIZE 0x04 +#define JEDEC_BE_81_INSIZE 0x00 + /* Block Erase 0xd8 is supported by EON/Macronix chips. */ #define JEDEC_BE_D8 0xd8 #define JEDEC_BE_D8_OUTSIZE 0x04 @@ -741,6 +741,86 @@ int spi_block_erase_20(struct flashctx *flash, unsigned int addr, return 0; } +int spi_block_erase_50(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { +/* .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { */ + .writecnt = JEDEC_BE_50_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_BE_50, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 10 ms, so wait in 1 ms steps. + */ + while (spi_read_status_register(flash) & SPI_SR_WIP) + programmer_delay(1 * 1000); + /* FIXME: Check the status register for errors. */ + return 0; +} + +int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { +/* .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { */ + .writecnt = JEDEC_BE_81_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_BE_81, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 8 ms, so wait in 1 ms steps. + */ + while (spi_read_status_register(flash) & SPI_SR_WIP) + programmer_delay(1 * 1000); + /* FIXME: Check the status register for errors. */ + return 0; +} + int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { |
