summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--nicnatsemi.c12
-rw-r--r--print.c5
-rw-r--r--print_wiki.c3
3 files changed, 17 insertions, 3 deletions
diff --git a/nicnatsemi.c b/nicnatsemi.c
index c3b93d9..89a0bf4 100644
--- a/nicnatsemi.c
+++ b/nicnatsemi.c
@@ -43,6 +43,14 @@ int nicnatsemi_init(void)
buses_supported = CHIP_BUSTYPE_PARALLEL;
+ /* The datasheet shows address lines MA0-MA16 in one place and MA0-MA15
+ * in another. My NIC has MA16 connected to A16 on the boot ROM socket
+ * so I'm assuming it is accessible. If not then next line wants to be
+ * max_rom_decode.parallel = 65536; and the mask in the read/write
+ * functions below wants to be 0x0000FFFF.
+ */
+ max_rom_decode.parallel = 131072;
+
return 0;
}
@@ -55,7 +63,7 @@ int nicnatsemi_shutdown(void)
void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr)
{
- OUTL((uint32_t)addr & 0x0000FFFF, io_base_addr + BOOT_ROM_ADDR);
+ OUTL((uint32_t)addr & 0x0001FFFF, io_base_addr + BOOT_ROM_ADDR);
/*
* The datasheet requires 32 bit accesses to this register, but it seems
* that requirement might only apply if the register is memory mapped.
@@ -69,7 +77,7 @@ void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr)
uint8_t nicnatsemi_chip_readb(const chipaddr addr)
{
- OUTL(((uint32_t)addr & 0x0000FFFF), io_base_addr + BOOT_ROM_ADDR);
+ OUTL(((uint32_t)addr & 0x0001FFFF), io_base_addr + BOOT_ROM_ADDR);
/*
* The datasheet requires 32 bit accesses to this register, but it seems
* that requirement might only apply if the register is memory mapped.
diff --git a/print.c b/print.c
index cc0ec91..b479984 100644
--- a/print.c
+++ b/print.c
@@ -228,7 +228,7 @@ void print_supported(void)
print_supported_boards_helper(boards_known, "boards");
print_supported_boards_helper(laptops_known, "laptops");
#endif
-#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1
printf("\nSupported PCI devices flashrom can use "
"as programmer:\n\n");
#endif
@@ -239,6 +239,9 @@ void print_supported(void)
print_supported_pcidevs(nics_realtek);
print_supported_pcidevs(nics_realteksmc1211);
#endif
+#if CONFIG_NICNATSEMI == 1
+ print_supported_pcidevs(nics_natsemi);
+#endif
#if CONFIG_GFXNVIDIA == 1
print_supported_pcidevs(gfx_nvidia);
#endif
diff --git a/print_wiki.c b/print_wiki.c
index d688530..8c0e06d 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -280,6 +280,9 @@ void print_supported_wiki(void)
print_supported_pcidevs_wiki(nics_realtek);
print_supported_pcidevs_wiki(nics_realteksmc1211);
#endif
+#if CONFIG_NICNATSEMI == 1
+ print_supported_pcidevs_wiki(nics_natsemi);
+#endif
#if CONFIG_GFXNVIDIA == 1
print_supported_pcidevs_wiki(gfx_nvidia);
#endif
OpenPOWER on IntegriCloud