path: root/serprog-protocol.txt
diff options
authorUrja Rannikko <>2009-07-21 13:02:59 +0000
committerCarl-Daniel Hailfinger <>2009-07-21 13:02:59 +0000
commitf3196df7f07d27fd1ebdd94365717369fb98a472 (patch)
treee180dd58520d1d950be93d438de457b17466eaed /serprog-protocol.txt
parent11793770600560ffa185871ae1906413eec70674 (diff)
Support for an external serial flasher protocol
Supports RS-232, USB serial converters (untested) and TCP streams. The protocol specification is in serprog-protocol.txt There will be tweaks to the code and maybe the protocol in the future, so the API is not set in stone yet. Corresponding to flashrom svn r656. Signed-off-by: Urja Rannikko <> Acked-by: Carl-Daniel Hailfinger <>
Diffstat (limited to 'serprog-protocol.txt')
1 files changed, 101 insertions, 0 deletions
diff --git a/serprog-protocol.txt b/serprog-protocol.txt
new file mode 100644
index 0000000..0d389e6
--- /dev/null
+++ b/serprog-protocol.txt
@@ -0,0 +1,101 @@
+Serial Flasher Protocol Specification - version 1 (0x01 return value == 1)
+Command And Answer Sequence - all commands give an answer.
+PC: COMMAND(8bit) <parameters determined by opcode>
+DEV: ACK/NAK(8bit) <OPTIONAL RETURN BYTES (only if ACK)> / nothing
+Command 0x10 (SYNCNOP) has a special return of NAK+ACK for synchronization.
+ACK = 0x06
+NAK = 0x15
+All multibyte values are little-endian. Addresses and lengths are 24-bit.
+COMMAND Description Parameters Return Value
+0x00 NOP none ACK
+0x01 Query programmer iface version none ACK + 16bit version (nonzero)
+0x02 Query supported commands bitmap none ACK + 32 bytes (256 bits) of supported cmds flags
+0x03 Query programmer name none ACK + 16 bytes string (null padding) / NAK
+0x04 Query serial buffer size none ACK + 16bit size / NAK
+0x05 Query supported bustypes none ACK + 8-bit flags (as per flashrom) / NAK
+0x06 Query connected address lines none ACK + 8bit line count / NAK
+0x07 Query operation buffer size none ACK + 16bit size / NAK
+0x08 Query write-n maximum data len none ACK + 24bit maximum length / NAK
+0x09 Read byte 24-bit addr ACK + BYTE / NAK
+0x0A Read n bytes 24-bit addr + 24-bit length ACK + length bytes / NAK
+0x0B Initialize operation buffer none ACK / NAK
+0x0C Write to opbuf: Write byte 24-bit addr + 8-bit byte ACK / NAK (NOTE: takes 5 bytes in opbuf)
+0x0D Write to opbuf: Write n 24-bit length + 24-bit addr + ACK / NAK (NOTE: takes 7+n bytes in opbuf)
+ + length bytes of data
+0x0E Write to opbuf: delay 32-bit usecs ACK / NAK (NOTE: takes 5 bytes in opbuf)
+0x0F Execute operation buffer none ACK / NAK
+0x10 Sync NOP none NAK + ACK (for synchronization)
+0x11 Query maximum read-n length none ACK + 24-bit length (0==2^24) / NAK
+0x12 Set used bustype 8-bit flags (as with 0x05) ACK / NAK
+0x?? unimplemented command - invalid.
+Additional information of the above commands:
+ About unimplemented commands / startup sequence:
+ Only commands allowed to be used without checking anything are 0x00,0x10 and 0x01 (NOP,SYNCNOP,Q_IFACE).
+ If 0x01 doesn't return 1, dont do anything if you dont support a newer protocol.
+ Then, check support for any other opcode (except 0x02) by using 0x02 (Q_CMDMAP).
+ 0x02 (Q_CMDMAP):
+ The map's bits are mapped as follows:
+ cmd 0 support: byte 0 bit 0
+ cmd 1 support: byte 0 bit 1
+ cmd 7 support: byte 0 bit 7
+ cmd 8 support: byte 1 bit 0, and so on.
+ 0x04 (Q_SERBUF):
+ If the programmer has guaranteedly working flow control,
+ it should return a big bogus value - eg 0xFFFF.
+ 0x05 (Q_BUSTYPE):
+ The bit's are defined as follows:
+ bit 0: PARALLEL, bit 1: LPC, bit 2: FWH, bit 3: SPI (if ever supported).
+ 0x06 (Q_CHIPSIZE):
+ Only applicable to parallel programmers.
+ An LPC/FHW/SPI-programmer can report this as not supported in the command bitmap.
+ 0x08 (Q_WRNMAXLEN):
+ If a programmer reports a bigger maximum write-n length than the serial buffer size,
+ it is assumed that the programmer can process the data fast enough to take in the
+ reported maximum write-n without problems.
+ 0x0F (O_EXEC):
+ Execute operation buffer will also clear it, regardless of the return value.
+ 0x11 (Q_RDNMAXLEN):
+ If this command is not supported, assume return of 0 (2^24).
+ 0x12 (S_BUSTYPE):
+ Set's the used bustype if the programmer can support more than one flash protocol.
+ Sending a byte with more than 1 bit set will make the programmer decide among them
+ on it's own. Bit values as with Q_BUSTYPE.
+ About mandatory commands:
+ The only truly mandatory commands for any device are 0x00, 0x01, 0x02 and 0x10,
+ but one can't really do anything with these commands.
+ Support for the following commands is necessary for flashrom to operate properly:
+ In addition, support for these commands is recommended:
+This define listing should help C coders - (it's here to be the single source for copying - will be a .h someday i think)
+#define S_ACK 0x06
+#define S_NAK 0x15
+#define S_CMD_NOP 0x00 /* No operation */
+#define S_CMD_Q_IFACE 0x01 /* Query interface version */
+#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */
+#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */
+#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */
+#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */
+#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */
+#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */
+#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum lenght */
+#define S_CMD_R_BYTE 0x09 /* Read a single byte */
+#define S_CMD_R_NBYTES 0x0A /* Read n bytes */
+#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */
+#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */
+#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */
+#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */
+#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */
+#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */
+#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */
+#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */
OpenPOWER on IntegriCloud