path: root/satasii.c
diff options
authorUwe Hermann <>2009-05-19 21:03:31 +0000
committerUwe Hermann <>2009-05-19 21:03:31 +0000
commitcdde6da8e58bbc4087df71b8c8230e02c38c8b9c (patch)
tree8e0bf8234f7f44d0ef18d5b76984d05674384e88 /satasii.c
parentc7e8a0ce1e2c5c08a43060ead373aebe62e68afe (diff)
Mark the Silicon Image PCI0680 Ultra ATA-133 controller as working
I tested identify, read, write, erase, verify successfully, HOWEVER, this will only work (at least on my card) after de-soldering the soldered-on PLCC32 one-time programmable (OTP) chip (Holtek HT27C010) and soldering on a (re-)programmable flash ROM chip or a socket. Example: The OTP chip which came on my card does not react to the standard JEDEC identify/read/write/erase commands anymore, so if all other such PCI0680 controllers which are around also have the same OTP chip (that's not necessarily the case), they cannot be used as "external programmer" in flashrom without the above mentioned modifications. Corresponding to flashrom svn r536. Signed-off-by: Uwe Hermann <> Acked-by: Uwe Hermann <>
Diffstat (limited to 'satasii.c')
1 files changed, 1 insertions, 1 deletions
diff --git a/satasii.c b/satasii.c
index a137c7f..468d01b 100644
--- a/satasii.c
+++ b/satasii.c
@@ -34,7 +34,7 @@ uint8_t *sii_bar;
uint16_t id;
struct pcidev_status satas_sii[] = {
- {0x1095, 0x0680, PCI_NT, "Silicon Image", "PCI0680 Ultra ATA-133 Host Controller"},
+ {0x1095, 0x0680, PCI_OK, "Silicon Image", "PCI0680 Ultra ATA-133 Host Controller"},
{0x1095, 0x3114, PCI_OK, "Silicon Image", "SiI 3114 [SATALink/SATARaid] Serial ATA Controller"},
{0x1095, 0x3124, PCI_NT, "Silicon Image", "SiI 3124 PCI-X Serial ATA Controller"},
{0x1095, 0x3132, PCI_OK, "Silicon Image", "SiI 3132 Serial ATA Raid II Controller"},
OpenPOWER on IntegriCloud