Add a bunch of new/tested stuff and various small changes 20

Tested mainboards:
OK:
 - abit BX6 2.0
   Reported by Stefan Tauner
 - Acer EM61SM/EM61PM (used in Acer Aspire T180)
   Reported by Benjamin Bellec
 - ADLINK Express-HR
   Reported by Obermair Thomas
 - ASUS M3N-H/HDMI
   Reported by Franc Serres
 - Attro G5G100-P
   Reported by Christoph Grenz
 - ASRock 960GM-GS3 FX
   Reported by Fuley Istvan
 - Elitegroup P6BAP-A+ (V2.2)
   Reported by Arnaldo Pirrone
 - Elitegroup GeForce7050M-M (V2.0)
   Reported by Leif Middelschulte
 - Fujitsu D3041-A1 (used in ESPRIMO P2560)
   Reported by Daggi Duck
 - GIGABYTE GA-8S648
   Reported by TeslaBIOS
 - GIGABYTE GA-970A-D3P (rev. 1.0)
   Reported by Jean-Francois Pirus
 - GIGABYTE GA-B85M-D3H
   Reported by Mladen Milinković
 - GIGABYTE GA-X79-UD3
   Reported by Jeff O'Neil
 - GIGABYTE GA-X79-UP4 (rev. 1.0)
   Reported by George Spelvin
 - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
   Reported by Vangelis Skarmoutsos
 - GIGABYTE GA-Z87-HD3
   Reported by virii5
 - Lenovo Tilapia CRB
   Reported by jenkins56 on IRC
 - MSI GT60-2OD (notebook, only with layout patches)
   Reported by Vasiliy Vylegzhanin
 - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
   Reported by professorll
 - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
   Reported by Koen Rousseau
 - MSI MS-7125 (K8N Neo4(-F/FI/FX))
   We had a board enable for that one for years, but it was not (and still is not)
   completely clear which boards are covered.
 - MSI MS-7522 (MSI X58 Pro-E)
   Reported by Gianluigi Tiesi
 - PCWARE APM80-D3
   Reported by César Augusto Jakoby
 - Pegatron IPP7A-CP
   Reported by Илья Шипко
 - Supermicro H8QME-2
   Reported by Greg Tippitt
 - Supermicro X7SPA-H
   Reported by Kyle Bentley
 - Supermicro X7SPE-HF-D525
   Reported by Micah Anderson
 - Supermicro X8DTE
   Reported by Mark Nipper
 - Supermicro X8SIL-F
   Reported by Peter Samuelson
 - ZOTAC IONITX-A (-E) version
   Reported by Maciej Wroniecki
NOT OK:
 - Supermicro X10SLM-F
   Reported by Micah Anderson

Flash chips:
 - Atmel AT29C020 to PREW (+PREW)
   It was marked like that in the past, but I could not find the reason why the
   test bits were reset. Urja Rannikko tested it again and it still works.
 - Eon EN25F10 to PREW (+PREW)
   Reported by Stolmár Tamás
 - Eon EN25QH64 to PR (+PR)
   Reported by Vladimir 'φ-coder' Serbinenko
 - GigaDevice GD25Q32(B) to PREW (+PREW)
   Reported by mrnuke
 - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
   Reported by Jamie Nichol
 - Macronix MX25L2005(C) to PREW (+PREW)
   Reported by Давыдов Дмитрий
 - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
   Reported by Paolo Zambotti
 - Pmc Pm25LD010(C) to PREW (+PREW)
   Reported by Vasile Ceteras
 - Micron/Numonyx/ST M25P16 to PREW (+EW)
   Reported by raven
 - Micron/Numonyx/ST M25PX64 to PREW (+W)
   Reported by Zaolin
 - SST SST25VF020B to PREW (+PREW)
   Reported by Michaël Zweers
 - SST SST49LF040 to PREW (+W)
   Reported by Oskar Enoksson
 - Add support for MX25L3273E (evil twin of MX25L3205 et al.)
   Also, add MX25L1673 and MX25L6473E to the names of their twins and
   add a note about MX25L8073E.
 - Winbond W25X32 to PREW (+REW)
   Reported by The Raven
 - Winbond W29C010 etc. to PREW (+W)
   Reported by san

Chipsets tested OK:
 - Intel NM70 (8086:1e5f)
   Reported by mrnuke
 - Intel C204 (8086:1c54)
   Reported by Vasiliy Vylegzhanin
 - Intel QM67 (8086:1c4f)
   Reported by Obermair Thomas
 - Intel HM77 (8086:1e57)
   Reported by Vasiliy Vylegzhanin
 - Intel B85 (8086:8c50)
   Reported by Mladen Milinković
 - Intel HM87 (8086:8c4b)
   Reported by Vasiliy Vylegzhanin
 - Intel Z87 (8086:8c44)
   Reported by virii5
 - NVIDIA MCP51 (10de:0261)
   Reported by Marcin Kościelnicki
 - SiS 648 (1039:0648)
   Reported by TeslaBIOS

Miscellaneous:
 - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
 - getrevision.sh: Ignore failing date calls.
 - getrevision.sh: Fix -u and -l for older git versions which require = for the
   git log grep parameter.
 - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
 - Add "-p internal" to output that requests users to send flashrom -V logs.
 - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
 - Tiny other stuff.

Corresponding to flashrom svn r1783.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

1 files changed, 44 insertions, 13 deletions

diff --git a/print.c b/print.c
index 6d2921b..759908d 100644
--- a/print.c
+++ b/print.c
@@ -533,6 +533,7 @@ const struct board_info boards_known[] = {
 	B("abit",	"AX8",			OK, NULL, NULL),
 	B("abit",	"BF6",			OK, NULL, NULL),
 	B("abit",	"BM6",			OK, NULL, NULL),
+	B("abit",	"BX6 2.0",		OK, NULL, NULL),
 	B("abit",	"Fatal1ty F-I90HD",	OK, NULL, NULL),
 	B("abit",	"IC7",			OK, NULL, NULL),
 	B("abit",	"IP35",			OK, NULL, NULL),
@@ -545,8 +546,10 @@ const struct board_info boards_known[] = {
 	B("abit",	"VA6",			OK, NULL, NULL),
 	B("abit",	"VT6X4",		OK, NULL, NULL),
 	B("Acer",	"V75-M",		OK, NULL, "This is an OEM board used by IBM in e.g. Aptiva 2170-G"),
+	B("Acer",	"EM61SM/EM61PM",	OK, NULL, "Used in Acer Aspire T180."),
 	B("Acorp",	"6A815EPD",		OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.asp", NULL),
 	B("Acorp",	"6M810C",		OK, NULL, NULL),
+	B("ADLINK",	"Express-HR",		OK, "http://www.adlinktech.com/PD/web/PD_detail.php?pid=1012", NULL),
 	B("Advantech",	"PCM-5820",		OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
 	B("agami",	"Aruma",		OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-6000-series", NULL),
 	B("Albatron",	"PM266A Pro",		OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview&no=56", NULL), /* FIXME */
@@ -562,6 +565,7 @@ const struct board_info boards_known[] = {
 	B("ASRock",	"880G Pro3",		OK, "http://www.asrock.com/mb/overview.asp?Model=880G%20Pro3", NULL),
 	B("ASRock",	"890GX Extreme3",	OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
 	B("ASRock",	"939A785GMH/128M",	OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
+	B("ASRock",	"960GM-GS3 FX",		OK, "http://www.asrock.com/mb/overview.asp?Model=960GM-GS3%20FX", NULL),
 	B("ASRock",	"A330GC",		OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
 	B("ASRock",	"A770CrossFire",	OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
 	B("ASRock",	"A780FullHD",		OK, "http://www.asrock.com/mb/overview.asp?Model=A780FullHD", "While flashrom is working correctly, there might be problems with the firmware images themselves. Please see http://www.flashrom.org/pipermail/flashrom/2012-July/009600.html for details."),
@@ -620,11 +624,11 @@ const struct board_info boards_known[] = {
 	B("ASUS",	"M2A-VM (HDMI)",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
 	B("ASUS",	"M2N32-SLI Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
 	B("ASUS",	"M2N68-VM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M2N68VM/", NULL),
+	B("ASUS",	"M2NBP-VM CSM",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
 	B("ASUS",	"M2N-E",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
 	B("ASUS",	"M2N-E SLI",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
-	B("ASUS",	"M2N-SLI Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
-	B("ASUS",	"M2NBP-VM CSM",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
 	B("ASUS",	"M2NPV-VM",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
+	B("ASUS",	"M2N-SLI Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
 	B("ASUS",	"M2V",			OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
 	B("ASUS",	"M2V-MX",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
 	B("ASUS",	"M3A",			OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
@@ -633,10 +637,11 @@ const struct board_info boards_known[] = {
 	B("ASUS",	"M3A78-EM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
 	B("ASUS",	"M3N78 PRO",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78_PRO/", NULL),
 	B("ASUS",	"M3N78-VM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
-	B("ASUS",	"M4A78-EM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
-	B("ASUS",	"M4A785T-M",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/", NULL),
+	B("ASUS",	"M3N-H/HDMI",		OK, "http://www.asus.com/Motherboards/M3NHHDMI//", NULL),
 	B("ASUS",	"M4A785TD-M EVO",	OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
 	B("ASUS",	"M4A785TD-V EVO",	OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
+	B("ASUS",	"M4A785T-M",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/", NULL),
+	B("ASUS",	"M4A78-EM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
 	B("ASUS",	"M4A78LT-M LE",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
 	B("ASUS",	"M4A79T Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
 	B("ASUS",	"M4A87TD/USB3",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
@@ -720,7 +725,7 @@ const struct board_info boards_known[] = {
 	B("ASUS",	"P8B75-M LE",		BAD, NULL, "Probing works (2x 8192 kB via hwseq), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
 	B("ASUS",	"P8H61 PRO",		BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
 	B("ASUS",	"P8H61-M LE/USB3",	BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
-	B("ASUS",	"P8H67-M PRO",		BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+	B("ASUS",	"P8H67-M PRO",		BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), // some firmware versions apparently are not locked, see report by Marek Zakrzewski
 	B("ASUS",	"P8H77-I",		OK, "http://www.asus.com/Motherboards/P8H77I/", NULL),
 	B("ASUS",	"P8H77-M",		OK, "http://www.asus.com/Motherboards/P8H77M/", NULL),
 	B("ASUS",	"P8H77-V LE",		OK, "http://www.asus.com/Motherboards/P8H77V_LE/", NULL),
@@ -739,6 +744,7 @@ const struct board_info boards_known[] = {
 	B("ASUS",	"TUSL2-C",		NT, "http://support.asus.com/download.aspx?SLanguage=en&p=1&s=4&m=TUSL2-C&os=&hashedid=n/a", "Untested board enable."),
 	B("ASUS",	"Z8NA-D6C",		OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
 	B("ASUS",	"Z8PE-D12",		OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
+	B("Attro",	"G5G100-P",		OK, "http://www.attro.com/motherboard/G5G100-P.htm", NULL),
 	B("Bachmann",	"OT200",		OK, "http://www.bachmann.info/produkte/bedien-und-beobachtungsgeraete/operator-terminals/", NULL),
 	B("BCOM",	"WinNET100",		OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
 	B("Bifferos",	"Bifferboard",		OK, "http://bifferos.co.uk/", NULL),
@@ -766,6 +772,7 @@ const struct board_info boards_known[] = {
 	B("Elitegroup",	"848P-A7",		OK, NULL, NULL),
 	B("Elitegroup",	"GeForce6100PM-M2 (V3.0)", OK, NULL, NULL),
 	B("Elitegroup",	"GeForce6100SM-M",	OK, NULL, NULL),
+	B("Elitegroup",	"GeForce7050M-M (V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=865&MenuID=20&LanID=0", NULL),
 	B("Elitegroup", "GF7100PVT-M3 (V1.0)",	OK, NULL, NULL),
 	B("Elitegroup", "GF8200A",		OK, NULL, NULL),
 	B("Elitegroup",	"K7S5A",		OK, NULL, NULL),
@@ -774,6 +781,7 @@ const struct board_info boards_known[] = {
 	B("Elitegroup",	"K7VTA3",		OK, NULL, NULL),
 	B("Elitegroup",	"P4M800PRO-M (V1.0A, V2.0)", OK, NULL, NULL),
 	B("Elitegroup", "P4VXMS (V1.0A)",	OK, NULL, NULL),
+	B("Elitegroup",	"P6BAP-A+ (V2.2)",	OK, NULL, NULL),
 	B("Elitegroup",	"P6IWP-Fe",		OK, NULL, NULL),
 	B("Elitegroup",	"P6VAP-A+",		OK, NULL, NULL),
 	B("Elitegroup", "RS485M-M",		OK, NULL, NULL),
@@ -792,10 +800,11 @@ const struct board_info boards_known[] = {
 	B("Foxconn",	"A6VMX",		OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000346", NULL),
 	B("Foxconn",	"P4M800P7MA-RS2",	OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000138", NULL),
 	B("Foxconn",	"P55MX",		OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000474", "Needs the MFG jumper to be set correctly before flashing to enable the Flash Descriptor Override Strap."),
-	B("Freetech",	"P6F91i",		OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F91i.html", NULL),
 	B("Foxconn",	"Q45M",			BAD, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000587", "Probing works (Hardware sequencing, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
-	B("Fujitsu-Siemens", "ESPRIMO P5915",	OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/P/EsprimoP5915-6.htm", "Mainboard model is D2312-A2."),
+	B("Freetech",	"P6F91i",		OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F91i.html", NULL),
+	B("Fujitsu",	"D3041-A1",		OK, NULL, "Used in ESPRIMO P2560, contains an Atmel AT26DF081A."),
 	B("Fujitsu-Siemens", "CELSIUS W410",	BAD, "ftp://ftp.ts.fujitsu.com/pub/mainboard-oem-sales/Products/Mainboards/Industrial&ExtendedLifetime/D3061&D3062/", "Mainboard model is D3062-A1. Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
+	B("Fujitsu-Siemens", "ESPRIMO P5915",	OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/P/EsprimoP5915-6.htm", "Mainboard model is D2312-A2."),
 	B("GIGABYTE",	"GA-2761GXDK",		OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gigabyte_dtx-mainboard/", NULL),
 	B("GIGABYTE",	"GA-6BXC",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
 	B("GIGABYTE",	"GA-6BXDU",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
@@ -811,22 +820,25 @@ const struct board_info boards_known[] = {
 	B("GIGABYTE",	"GA-8IP775",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
 	B("GIGABYTE",	"GA-8IRML",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
 	B("GIGABYTE",	"GA-8PE667 Ultra 2",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
+	B("GIGABYTE",	"GA-8S648",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1674", NULL),
 	B("GIGABYTE",	"GA-8SIMLH",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
 	B("GIGABYTE",	"GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
 	B("GIGABYTE",	"GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
 	B("GIGABYTE",	"GA-965P-DS4",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
+	B("GIGABYTE",	"GA-970A-D3P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4642", NULL),
 	B("GIGABYTE",	"GA-A75M-UD2H",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3928", NULL),
+	B("GIGABYTE",	"GA-B85M-D3H",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4567", NULL),
 	B("GIGABYTE",	"GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
 	B("GIGABYTE",	"GA-EP35-DS3L",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
+	B("GIGABYTE",	"GA-EX58-UD4P",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
 	B("GIGABYTE",	"GA-G41MT-S2PT",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3960", NULL),
 	B("GIGABYTE",	"GA-H61M-D2-B3",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3773", NULL),
 	B("GIGABYTE",	"GA-H61M-D2H-USB3",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4004", NULL),
 	B("GIGABYTE",	"GA-H77-D3H",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4141", "Does only work with -p internal:ich_spi_mode=hwseq due to an evil twin of MX25L6405 and ICH SPI lockdown."),
 	B("GIGABYTE",	"GA-H77M-D3H",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4388", NULL),
-	B("GIGABYTE",	"GA-EX58-UD4P",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
-	B("GIGABYTE",	"GA-K8N-SLI",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
-	B("GIGABYTE",	"GA-K8N51GMF",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
 	B("GIGABYTE",	"GA-K8N51GMF-9",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
+	B("GIGABYTE",	"GA-K8N51GMF",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
+	B("GIGABYTE",	"GA-K8N-SLI",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
 	B("GIGABYTE",	"GA-K8NS Pro-939",	NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."),
 	B("GIGABYTE",	"GA-M57SLI-S4",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
 	B("GIGABYTE",	"GA-M61P-S3",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
@@ -848,10 +860,14 @@ const struct board_info boards_known[] = {
 	B("GIGABYTE",	"GA-P67A-UD3P",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
 	B("GIGABYTE",	"GA-X58A-UD3R (rev. 2.0)", OK, NULL, NULL),
 	B("GIGABYTE",	"GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL),
-	B("GIGABYTE",	"GA-X79-UD5", OK, NULL, NULL),
+	B("GIGABYTE",	"GA-X79-UD5",		OK, NULL, NULL),
+	B("GIGABYTE",	"GA-X79-UD3",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4050", "Contains a Macronix MX25L6406E."),
+	B("GIGABYTE",	"GA-X79-UP4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4288", NULL),
+	B("GIGABYTE",	"GA-Z68MA-D2H-B3 (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3975", NULL),
 	B("GIGABYTE",	"GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
 	B("GIGABYTE",	"GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
 	B("GIGABYTE",	"GA-Z77MX-D3H",		BAD, "http://www.gigabyte.com/products/product-page.aspx?pid=4145", "Uses MX25L6436E and requires a small patch (but works flawlessly with that)."),
+	B("GIGABYTE",	"GA-Z87-HD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4489", NULL),
 	B("HP",		"8100 Elite CMT PC (304Bh)", BAD, NULL, "SPI lock down, PR, read-only descriptor, locked ME region."),
 	B("HP",		"e-Vectra P2706T",	OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodSeriesId=77515&prodTypeId=12454", NULL),
 	B("HP",		"Evans-GL6 (Pegatron IPMEL-AE)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01925513", "Found in HP Pavilion Slimline s5220f."),
@@ -893,6 +909,7 @@ const struct board_info boards_known[] = {
 	B("Jetway",	"J7F4K1G5D-PB",		OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G5D", NULL),
 	B("Kontron",	"986LCD-M",		OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/miniitx+motherboards/986lcdmmitx.html", NULL),
 	B("Lanner",	"EM-8510C",		OK, NULL, NULL),
+	B("Lenovo",	"Tilapia CRB",		OK, NULL, "Used in ThinkCentre M75e."),
 	B("Lex",	"CV700A",		OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
 	B("Mitac",	"6513WU",		OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm", NULL),
 	B("MSC",	"Q7-TCTC",		OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL),
@@ -907,7 +924,8 @@ const struct board_info boards_known[] = {
 	B("MSI",	"MS-6570 (K7N2)",	OK, "http://www.msi.com/product/mb/K7N2.html", NULL),
 	B("MSI",	"MS-6577 (Xenon)",	OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=en&docname=bph07843", "This is an OEM board from HP, the HP name is Xenon."),
 	B("MSI",	"MS-6590 (KT4 Ultra)",	OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
-	B("MSI",	"MS-6702E (K8T Neo2-F)",OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
+	//B("MSI",	"MS-6702E (K8T Neo2-F/FIR)",OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), This was wrongly attributed to the MS-7094 board enable.
+	B("MSI",	"MS-6704 (845PE Max2 PCB 1.0)", OK, "http://www.msi.com/product/mb/845PE-Max2.html", "Write protection must be disabled in the BIOS setup."),
 	B("MSI",	"MS-6712 (KT4V)",	OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
 	B("MSI",	"MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL),
 	B("MSI",	"MS-7005 (651M-L)",	OK, "http://www.msi.com/product/mb/651M-L.html", NULL),
@@ -916,6 +934,8 @@ const struct board_info boards_known[] = {
 	B("MSI",	"MS-7046",		OK, "http://www.heimir.de/ms7046/", NULL),
 	B("MSI",	"MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL),
 	B("MSI",	"MS-7065",		OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL),
+	B("MSI",	"MS-7094 (K8T Neo2-F V2.0)",OK, "http://www.msi.com/product/mb/K8T_Neo2F_V2.0.html", NULL),
+	B("MSI",	"MS-7125 (K8N Neo4(-F/-FI/-FX/Platinum))", OK, "http://www.msi.com/product/mb/K8N_Neo4_Platinum_PCB_1.0.html", NULL),
 	B("MSI",	"MS-7135 (K8N Neo3)",	OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
 	B("MSI",	"MS-7142 (K8MM-V)",	OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL),
 	B("MSI",	"MS-7168 (Orion)",	OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform_honeymoon_istart", NULL),
@@ -935,6 +955,8 @@ const struct board_info boards_known[] = {
 	B("MSI",	"MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
 	B("MSI",	"MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
 	B("MSI",	"MS-7379 (G31M)",	OK, "http://www.msi.com/product/mb/G31M.html", NULL),
+	B("MSI",	"MS-7399 1.1 (Persian)", OK, "http://acersupport.com/acerpanam/desktop/0000/Acer/AspireM5640/AspireM5640sp2.shtml", "This is an OEM board used by Acer in e.g. Aspire M5640/M3640."),
+	B("MSI",	"MS-7522 (MSI X58 Pro-E)", OK, "http://www.msi.com/product/mb/X58_ProE.html", NULL),
 	B("MSI",	"MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
 	B("MSI",	"MS-7529 (G31TM-P21)",	OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
 	B("MSI",	"MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&dlc=en", NULL),
@@ -968,6 +990,8 @@ const struct board_info boards_known[] = {
 	B("PC Engines",	"Alix.3d3",		OK, "http://pcengines.ch/alix3d3.htm", NULL),
 	B("PC Engines",	"Alix.6f2",		OK, "http://pcengines.ch/alix6f2.htm", NULL),
 	B("PC Engines",	"WRAP.2E",		OK, "http://pcengines.ch/wrap2e1.htm", NULL),
+	B("PCWARE",	"APM80-D3",		OK, "http://www.pcwarebr.com.br/produtos_mb_apm80-d3.php", "Probably manufactured by ASUS"),
+	B("Pegatron",	"IPP7A-CP",		OK, NULL, NULL),
 	B("Portwell",	"PEB-4700VLA",		OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
 	B("RCA",	"RM4100",		OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
 	B("Samsung",	"Polaris 32",		OK, NULL, NULL),
@@ -992,10 +1016,14 @@ const struct board_info boards_known[] = {
 	B("Sun",	"Fire x4600",		BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."),
 	B("Sun",	"Ultra 40 M2",		OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.html", NULL),
 	B("Supermicro",	"H8QC8",		OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL),
+	B("Supermicro",	"H8QME-2",		OK, "http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2.cfm", NULL),
+	B("Supermicro",	"X10SLM-F",		BAD, "http://www.supermicro.com/products/motherboard/Xeon/C220/X10SLM-F.cfm", "Probing works (Winbond W25Q128, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."),
 	B("Supermicro", "X5DP8-G2",		OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL),
 	B("Supermicro", "X7DBT-INF",		OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
-	B("Supermicro", "X7SPA-HF",		OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IPMI=Y", NULL),
+	B("Supermicro", "X7SPA-H(F)",		OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H", NULL),
+	B("Supermicro", "X7SPE-HF-D525",	OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm", NULL),
 	B("Supermicro", "X8DT3",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
+	B("Supermicro", "X8DT6-F",		OK, "http://www.supermicro.nl/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&SAS=Y", NULL),
 	B("Supermicro", "X8DTE-F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&SAS=N", NULL),
 	B("Supermicro", "X8DTG-D",		OK, "http://www.supermicro.com/products/motherboard/qpi/5500/x8dtg-df.cfm", NULL),
 	B("Supermicro", "X8DTH-6F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
@@ -1005,6 +1033,7 @@ const struct board_info boards_known[] = {
 	B("Supermicro",	"X8DTU-F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
 	B("Supermicro",	"X8SAX",		OK, "http://www.supermicro.com/products/motherboard/xeon3000/x58/x8sax.cfm", NULL),
 	B("Supermicro",	"X8SIE(-F)",		BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI=N&TYP=LN2", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
+	B("Supermicro",	"X8SIL-F",		OK, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIL.cfm", NULL),
 	B("Supermicro",	"X8STi",		OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
 	B("Supermicro",	"X9DR3-F",		BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9dr3-f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
 	B("Supermicro",	"X9DRD-7LN4F",		BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9drd-7ln4f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
@@ -1070,6 +1099,7 @@ const struct board_info boards_known[] = {
 	B("ZOTAC",	"GeForce 8200",		OK, NULL, NULL),
 	B("ZOTAC",	"H61-ITX WiFi (H61ITX-A-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
 	B("ZOTAC",	"H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+	B("ZOTAC",	"IONITX-A",		OK, NULL, NULL),
 	B("ZOTAC",	"nForce 630i Supreme (N73U-Supreme)", OK, NULL, NULL),
 	B("ZOTAC",	"ZBOX AD02 (PLUS)",	OK, NULL, NULL),
 	B("ZOTAC",	"ZBOX HD-ID11",		OK, NULL, NULL),
@@ -1101,6 +1131,7 @@ const struct board_info laptops_known[] = {
 	B("IBM/Lenovo",	"Thinkpad X1",		BAD, "http://www.thinkwiki.org/wiki/Category:X1", "Probing works (ST M25PX64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."),
 	B("IBM/Lenovo",	"240",			BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
 	B("Lenovo",	"3000 V100 TF05Cxx",	OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3000Notebook&series=Lenovo+3000+V+Series#viewallmodelstop", NULL),
+	//B("MSI",	"GT60-2OD",		OK, "http://www.msi.com/product/nb/GT60_2OD.html", NULL), requires layout patches
 #endif
 
 	{0},