diff options
| author | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2016-03-13 15:16:30 +0000 |
|---|---|---|
| committer | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2016-03-13 15:16:30 +0000 |
| commit | 0be072cbe4d05b1e69d1c02291f3a2a544beb2af (patch) | |
| tree | 3c4270b0bdf66cd15fcc6b2525c0ff9aa4a803ab /print.c | |
| parent | fc3ecc2a812235fce1a4cdc7dc3338507150e8c7 (diff) | |
| download | ast2050-flashrom-0be072cbe4d05b1e69d1c02291f3a2a544beb2af.zip ast2050-flashrom-0be072cbe4d05b1e69d1c02291f3a2a544beb2af.tar.gz | |
Add a bunch of new/tested stuff and various small changes 25
Tested mainboards:
OK:
- ASRock Fatal1ty 970 Performance and P4i65G
Reported by anonymous email message ID:
932677687262b1300eaf14260999d9262c31@guerrillamail.com
The latter actually had a tested board enable already.
Flash chips:
- Eon EN25Q128 to PREW (+PREW)
Reported by Adrian Graham
- GigaDevice GD25VQ41B to PREW (+PREW)
Reported by David Hendricks
- Winbond W39V040FB to PREW (+EW)
Reported by fjed on IRC
Miscellaneous:
- Change PCI IDs of "MS-6577 (Xenon)" board enable.
The previous IDs contained the on-board display adapter which is
disabled when a dedicated graphics card is installed.
- Add a note to the README how to overcome the clang warning if only a
single programmer is enabled.
- Fix some typo and manpage problems found by lintian
- r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG).
This patch corrects that.
- Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable.
Previous PCI IDs were board-specific but ot the other of devices
that could be disabled by the firmware or that vary among
hardware revions. There are no good alternatives available.
However, since we always have a DMI decoder available now, we can
use non-board-specific devices without taking risks. Thanks to
Uwe Hermann for reporting and testing.
- Some other small changes to clean up whitespace and fix some warnings
from Debian's lintian.
Corresponding to flashrom svn r1951.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Diffstat (limited to 'print.c')
| -rw-r--r-- | print.c | 4 |
1 files changed, 2 insertions, 2 deletions
@@ -490,11 +490,9 @@ int print_supported(void) case USB: print_supported_devs(prog, "USB"); break; -#if NEED_PCI == 1 case PCI: print_supported_devs(prog, "PCI"); break; -#endif case OTHER: if (prog.devs.note != NULL) { msg_ginfo("\nSupported devices for the %s programmer:\n", prog.name); @@ -571,6 +569,7 @@ const struct board_info boards_known[] = { B("ASRock", "AMCP7AION-HT", OK, "http://www.asrock.com/nettop/NVIDIA/ION%20330HT/", "Used in ION 330HT(-BD) barebones."), B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), B("ASRock", "E350M1/USB3", OK, "http://www.asrock.com/mb/overview.asp?model=e350m1/usb3", "Vendor firmware writes to flash at shutdown. This probably corrupts the flash in case you write coreboot while running the vendor firmware. Simply updating the vendor firmware should be fine."), + B("ASRock", "Fatal1ty 970 Performance", OK, "http://www.asrock.com/mb/overview.asp?Model=Fatal1ty%20970%20Performance", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "Fatal1ty Z77 Performance", BAD, "http://www.asrock.com/mb/overview.asp?Model=Fatal1ty%20Z77%20Performance", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "G31M-GS", OK, "http://www.asrock.com/mb/overview.asp?Model=G31M-GS", NULL), B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S", NULL), @@ -585,6 +584,7 @@ const struct board_info boards_known[] = { B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), B("ASRock", "N61P-S", OK, "http://www.asrock.com/mb/overview.asp?Model=N61P-S", NULL), B("ASRock", "N68C-S UCC", OK, "http://www.asrock.com/mb/overview.asp?Model=N68C-S%20UCC", NULL), + B("ASRock", "P4i65G", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65G", NULL), B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), B("ASRock", "Z68 Extreme4", BAD, "http://www.asrock.com/mb/overview.asp?Model=Z68%20Extreme4", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), |
