summaryrefslogtreecommitdiffstats
path: root/ichspi.c
diff options
context:
space:
mode:
authorStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>2012-10-20 09:13:16 +0000
committerStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>2012-10-20 09:13:16 +0000
commitd7d423bbc1d2564c60daaecd9ab1dca3843c5fea (patch)
treebc9d591677afbe3dae8f9a01a70f95f9487982a7 /ichspi.c
parent99f947ddc8156eb37b5dafc076480f405c9be0b6 (diff)
downloadast2050-flashrom-d7d423bbc1d2564c60daaecd9ab1dca3843c5fea.zip
ast2050-flashrom-d7d423bbc1d2564c60daaecd9ab1dca3843c5fea.tar.gz
Add a bunch of new/tested stuff and various small changes 15
Tested Mainboards: OK: - Foxconn P55MX http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html Tested flash chips: - Eon EN25F64 to PR (+PR) http://paste.flashrom.org/view.php?id=1426 - Macronix MX25L1005 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html - Set SST39VF512 to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html Tested chipsets: - Z77 (only reading was really tested) Miscellaneous: - Fix ft2232_spi's parameter parsing. - Fix nicrealtek's init (always segfaulted since r1586 oops). - Add another T60 variant to the laptop whitelist. - Improve message shown when image file size does not match flash chip - Refine messages regarding the flash descriptor override strap according to the findings by Vladislav Bykov on his P55MX. - Fix the ID of EN25F64. - Demote and clarify debug message in serprog_delay(). - Minor other cleanups. Corresponding to flashrom svn r1613. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'ichspi.c')
-rw-r--r--ichspi.c22
1 files changed, 9 insertions, 13 deletions
diff --git a/ichspi.c b/ichspi.c
index 8dd1893..fadfe62 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -1675,11 +1675,9 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
if (tmp2 & HSFS_FDV)
desc_valid = 1;
if (!(tmp2 & HSFS_FDOPSS) && desc_valid)
- msg_pinfo("The Flash Descriptor Security Override "
- "Strap-Pin is set. Restrictions implied\n"
- "by the FRAP and FREG registers are NOT in "
- "effect. Please note that Protected\n"
- "Range (PR) restrictions still apply.\n");
+ msg_pinfo("The Flash Descriptor Override Strap-Pin is set. Restrictions implied by\n"
+ "the Master Section of the flash descriptor are NOT in effect. Please note\n"
+ "that Protected Range (PR) restrictions still apply.\n");
ich_init_opcodes();
if (desc_valid) {
@@ -1720,15 +1718,13 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
"yet.\n");
if (!ich_spi_force)
programmer_may_write = 0;
- msg_pinfo("Writes have been disabled. You can enforce "
- "write support with the\nich_spi_force "
- "programmer option, but it will most likely "
- "harm your hardware!\nIf you force flashrom "
- "you will get no support if something "
- "breaks.\n");
+ msg_pinfo("Writes have been disabled for safety reasons. You can enforce write\n"
+ "support with the ich_spi_force programmer option, but you will most likely\n"
+ "harm your hardware! If you force flashrom you will get no support if\n"
+ "something breaks. On a few mainboards it is possible to enable write\n"
+ "access by setting a jumper (see its documentation or the board itself).\n");
if (ich_spi_force)
- msg_pinfo("Continuing with write support "
- "because the user forced us to!\n");
+ msg_pinfo("Continuing with write support because the user forced us to!\n");
}
tmp = mmio_readl(ich_spibar + ICH9_REG_SSFS);
OpenPOWER on IntegriCloud