diff options
| author | Simon Glass <sjg@chromium.org> | 2016-01-23 23:27:58 +0000 |
|---|---|---|
| committer | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2016-01-23 23:27:58 +0000 |
| commit | ae61651bfab63139493f5ac18348125e8d5baeb0 (patch) | |
| tree | 4fcafc84ea8bd579b4cc21f8783cd8271ea00bb0 /Makefile | |
| parent | 23e10b87801c22f34642895de8b0b726265eb016 (diff) | |
| download | ast2050-flashrom-ae61651bfab63139493f5ac18348125e8d5baeb0.zip ast2050-flashrom-ae61651bfab63139493f5ac18348125e8d5baeb0.tar.gz | |
dediprog: support new communication protocol, cleanup and enable by default
The new protocol changes some commands, so adjust the code to support
these. Use helper functions to reduce duplication in libusb calls. Testing
with real hardware showed that the maximum read size via the control
endpoint is about 16 bytes although specification does not mention that.
Dediprog SF600 is not supported yet.
Based on the following chromiumos changes:
Change-Id: Ibd1e27d9e8273ba879b9b5d95675b99596255c89
Change-Id: Ifc33e7b1eed5b0cb80f83458fa24741a577fa46a
Additionally, some ideas from Alex for cleaner code were incorporated as well.
Tested on an SF100 V4 with both firmware generations PREWing a M25PX80
and AT45DB041D (the latter is using dediprog_spi_send_command() instead
of optimized functions which make it a good test vehicle).
Corresponding to flashrom svn r1918.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 4 |
1 files changed, 2 insertions, 2 deletions
@@ -493,8 +493,8 @@ CONFIG_OGP_SPI ?= yes # Always enable Bus Pirate SPI for now. CONFIG_BUSPIRATE_SPI ?= yes -# Disable Dediprog SF100 until support is complete and tested. -CONFIG_DEDIPROG ?= no +# Always enable Dediprog SF100 for now. +CONFIG_DEDIPROG ?= yes # Always enable Marvell SATA controllers for now. CONFIG_SATAMV ?= yes |
