path: root/Documentation/serprog-protocol.txt
diff options
authorStefan Tauner <>2014-08-06 15:09:15 +0000
committerStefan Tauner <>2014-08-06 15:09:15 +0000
commit6697f71ade7b6428c7be6051c02dbb9768900e04 (patch)
tree23a2f8596d493396b7d9571ee91888e3f49c49f9 /Documentation/serprog-protocol.txt
parent88b19257cb41c97123d832460c944abc588a8e89 (diff)
Add a bunch of new/tested stuff and various small changes 21
Tested mainboards: OK: - ASUS F2A85-M Reported by various corebooters - ASUS M2N-MX SE Plus Reported by Antonio - ASUS P5LD2 Reported by François Revol - Lenovo ThinkPad T530 Reported and partially authored by Edward O'Callaghan - MSI MS-7502 (Medion MD8833) Reported by naq on IRC - Shuttle AB61 Reported by olofolleola4 - ZOTAC IONITX-F-E Reported by Bernardo Kuri Flash chips: - Atmel AT45DB021D to PREW (+PREW) Reported by The Raven - Atmel AT25F4096 to PREW (+PREW) Reported by 공준혁 - GigaDevice GD25Q16(B) to PREW (+PREW) Reported by using a GD25Q16BSIG - Catalyst CAT28F512 Mark erase and write as known bad (not implemented) Miscellaneous: - Various spelling corrections by Daniele Forsi. - Added and refined a bunch of chips originally investigated by Carl-Daniel. - Marked the ARM-USB-OCD-H programmer as tested (reported by Ruud Schramp). - Tiny other stuff. Corresponding to flashrom svn r1839. Signed-off-by: Stefan Tauner <> Acked-by: Stefan Tauner <>
Diffstat (limited to 'Documentation/serprog-protocol.txt')
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/serprog-protocol.txt b/Documentation/serprog-protocol.txt
index 58f4417..6b7e7e3 100644
--- a/Documentation/serprog-protocol.txt
+++ b/Documentation/serprog-protocol.txt
@@ -74,7 +74,7 @@ Additional information of the above commands:
Send and receive bytes via SPI.
Maximum slen is Q_WRNMAXLEN in case Q_BUSTYPE returns SPI only or S_BUSTYPE was used
to set SPI exclusively before. Same for rlen and Q_RDNMAXLEN.
- This operation is immediate, meaning it doesnt use the operation buffer.
+ This operation is immediate, meaning it doesn't use the operation buffer.
0x14 (S_SPI_FREQ):
Set the SPI clock frequency. The 32-bit value indicates the
requested frequency in Hertz. Value 0 is reserved and should
OpenPOWER on IntegriCloud