summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMark Marshall <mark.marshall@csr.com>2010-12-03 14:48:11 +0000
committerCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2010-12-03 14:48:11 +0000
commit90021f28ff6cb97c53aeb18667addefb43c706e3 (patch)
tree7ec04388c7b9dbb9796953d6616b855bf451d341
parent859f3f0d751e92ec99c79408a4a7789bfb61a514 (diff)
downloadast2050-flashrom-90021f28ff6cb97c53aeb18667addefb43c706e3.zip
ast2050-flashrom-90021f28ff6cb97c53aeb18667addefb43c706e3.tar.gz
Add support for the Open Graphics Project development card, OGD1, as a SPI flash programmer
The project is in the the process of designing and making a complete, open source, graphics card. More info at http://wiki.opengraphics.org. The first development card is a PCI add in card containing a couple of FPGAs and a couple of serial flash chips (amongst other things). The FPGAs are called XP10 and S3 (their part numbers). The XP10 contains its own flash and does not need to be programmed by flashrom - it ensures that the device can enumerate on the PCI bus without needing further configuration. The larger FPGA is the S3. This is configured from a large SPI flash (2 MBytes). The second SPI flash is used to store the VGA BIOS. It is smaller (128 KBytes). This patch adds support for programming either of the two SPI flash chips. The programmer device takes one configuration option which selects which of the two flash chips is accessed. This must be set to either "cprom" or "bprom". (The project refers to the two chips as "cprom" / "bprom", "s3" and "bios" are more readable alternatives). Add support for SST SST25VF010 (REMS). Mark SST SST25VF016B as tested for write. Corresponding to flashrom svn r1241. Signed-off-by: Mark Marshall <mark.marshall@csr.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
-rw-r--r--Makefile13
-rw-r--r--flashchips.c31
-rw-r--r--flashrom.836
-rw-r--r--flashrom.c24
-rw-r--r--ogp_spi.c145
-rw-r--r--print.c5
-rw-r--r--print_wiki.c3
-rw-r--r--programmer.h18
-rw-r--r--spi.c9
9 files changed, 281 insertions, 3 deletions
diff --git a/Makefile b/Makefile
index 3215992..0f20b8a 100644
--- a/Makefile
+++ b/Makefile
@@ -146,6 +146,9 @@ CONFIG_NICNATSEMI ?= no
# Always enable SPI on Intel NICs for now.
CONFIG_NICINTEL_SPI ?= yes
+# Always enable SPI on OGP cards for now.
+CONFIG_OGP_SPI ?= yes
+
# Always enable Bus Pirate SPI for now.
CONFIG_BUSPIRATE_SPI ?= yes
@@ -165,10 +168,14 @@ else
ifeq ($(CONFIG_NICINTEL_SPI), yes)
override CONFIG_BITBANG_SPI = yes
else
+ifeq ($(CONFIG_OGP_SPI), yes)
+override CONFIG_BITBANG_SPI = yes
+else
CONFIG_BITBANG_SPI ?= no
endif
endif
endif
+endif
ifeq ($(CONFIG_INTERNAL), yes)
FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
@@ -258,6 +265,12 @@ PROGRAMMER_OBJS += nicintel_spi.o
NEED_PCI := yes
endif
+ifeq ($(CONFIG_OGP_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_OGP_SPI=1'
+PROGRAMMER_OBJS += ogp_spi.o
+NEED_PCI := yes
+endif
+
ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1'
PROGRAMMER_OBJS += buspirate_spi.o
diff --git a/flashchips.c b/flashchips.c
index a9ce4a2..e13e829 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -4897,13 +4897,42 @@ struct flashchip flashchips[] = {
{
.vendor = "SST",
+ .name = "SST25VF010.REMS",
+ .bustype = CHIP_BUSTYPE_SPI,
+ .manufacture_id = SST_ID,
+ .model_id = SST_SST25VF010_REMS,
+ .total_size = 128,
+ .page_size = 256,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rems,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 32} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 4} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ },
+ },
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_1,
+ .read = spi_chip_read,
+ },
+
+ {
+ .vendor = "SST",
.name = "SST25VF016B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF016B,
.total_size = 2048,
.page_size = 256,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
diff --git a/flashrom.8 b/flashrom.8
index 0f2a6c4..6adb0ef 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -198,6 +198,9 @@ based programmer)"
.BR "* nicintel_spi" " (for SPI flash ROMs attached to an Intel Gigabit \
network cards)"
.sp
+.BR "* ogp_spi" " (for SPI flash ROMs attached to an Open Graphics Project \
+graphics card)"
+.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
.B PROGRAMMER SPECIFIC INFO
@@ -432,6 +435,34 @@ four. Make sure to not forget the "0x" prefix for hexadecimal port addresses.
.sp
More information about the hardware is available at
http://rayer.ic.cz/elektro/spipgm.htm
+.TP
+.BR "ogp_spi " programmer
+The FLASH ROM chip to access must be specified with the
+.B rom
+parameter.
+.sp
+.B " flashrom \-p ogp_spi:rom=name"
+.sp
+Where
+.B name
+is either
+.B cprom
+or
+.B s3
+for the configuration ROM and
+.B bprom
+or
+.B bios
+for the BIOS ROM. If more than one card supported by the ogp_spi programmer
+is installed in your system, you have to specify the PCI address of the card
+you want to use with the
+.B pci=
+parameter as explained in the
+.B nic3com
+section above.
+.sp
+More information about the hardware is available at
+http://wiki.opengraphics.org
.SH EXIT STATUS
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
@@ -480,6 +511,9 @@ have to be run as superuser/root, and need additional raw access permission.
can be run as normal user on most operating systems if appropriate device
permissions are set.
.sp
+.B ogp
+needs PCI configuration space read access and raw memory access.
+.sp
On OpenBSD, you can obtain raw access permission by setting
securelevel=-1 in /etc/rc.securelevel and rebooting, or rebooting into single
user mode.
@@ -538,6 +572,8 @@ Luc Verhaegen
.br
Li-Ta Lo
.br
+Mark Marshall
+.br
Markus Boas
.br
Mattias Mattsson
diff --git a/flashrom.c b/flashrom.c
index 55d4d7b..9ac857e 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -52,7 +52,7 @@ enum programmer programmer = PROGRAMMER_DUMMY;
* if more than one of them is selected. If only one is selected, it is clear
* that the user wants that one to become the default.
*/
-#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI > 1
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI > 1
#error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one.
#endif
enum programmer programmer =
@@ -96,6 +96,9 @@ enum programmer programmer =
#if CONFIG_NICINTEL_SPI == 1
PROGRAMMER_NICINTEL_SPI
#endif
+#if CONFIG_OGP_SPI == 1
+ PROGRAMMER_OGP_SPI
+#endif
;
#endif
@@ -439,6 +442,25 @@ const struct programmer_entry programmer_table[] = {
},
#endif
+#if CONFIG_OGP_SPI == 1
+ {
+ .name = "ogp_spi",
+ .init = ogp_spi_init,
+ .shutdown = ogp_spi_shutdown,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .chip_readb = noop_chip_readb,
+ .chip_readw = fallback_chip_readw,
+ .chip_readl = fallback_chip_readl,
+ .chip_readn = fallback_chip_readn,
+ .chip_writeb = noop_chip_writeb,
+ .chip_writew = fallback_chip_writew,
+ .chip_writel = fallback_chip_writel,
+ .chip_writen = fallback_chip_writen,
+ .delay = internal_delay,
+ },
+#endif
+
{}, /* This entry corresponds to PROGRAMMER_INVALID. */
};
diff --git a/ogp_spi.c b/ogp_spi.c
new file mode 100644
index 0000000..fb52a8c
--- /dev/null
+++ b/ogp_spi.c
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2010 Mark Marshall
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include "flash.h"
+#include "programmer.h"
+
+#define PCI_VENDOR_ID_OGP 0x1227
+
+/* These are the register addresses for the OGD1 / OGA1. If they are
+ * different for later versions of the hardware then we will need
+ * logic to select between the different hardware versions. */
+#define OGA1_XP10_BPROM_SI 0x0040 /* W */
+#define OGA1_XP10_BPROM_SO 0x0040 /* R */
+#define OGA1_XP10_BPROM_CE_BAR 0x0044 /* W */
+#define OGA1_XP10_BPROM_SCK 0x0048 /* W */
+#define OGA1_XP10_BPROM_REG_SEL 0x004C /* W */
+#define OGA1_XP10_CPROM_SI 0x0050 /* W */
+#define OGA1_XP10_CPROM_SO 0x0050 /* R */
+#define OGA1_XP10_CPROM_CE_BAR 0x0054 /* W */
+#define OGA1_XP10_CPROM_SCK 0x0058 /* W */
+#define OGA1_XP10_CPROM_REG_SEL 0x005C /* W */
+
+static uint8_t *ogp_spibar;
+
+static uint32_t ogp_reg_sel;
+static uint32_t ogp_reg_siso;
+static uint32_t ogp_reg__ce;
+static uint32_t ogp_reg_sck;
+
+const struct pcidev_status ogp_spi[] = {
+ {PCI_VENDOR_ID_OGP, 0x0000, OK, "Open Graphics Project", "Development Board OGD1"},
+ {},
+};
+
+static void ogp_request_spibus(void)
+{
+ pci_mmio_writel(1, ogp_spibar + ogp_reg_sel);
+}
+
+static void ogp_release_spibus(void)
+{
+ pci_mmio_writel(0, ogp_spibar + ogp_reg_sel);
+}
+
+static void ogp_bitbang_set_cs(int val)
+{
+ pci_mmio_writel(val, ogp_spibar + ogp_reg__ce);
+}
+
+static void ogp_bitbang_set_sck(int val)
+{
+ pci_mmio_writel(val, ogp_spibar + ogp_reg_sck);
+}
+
+static void ogp_bitbang_set_mosi(int val)
+{
+ pci_mmio_writel(val, ogp_spibar + ogp_reg_siso);
+}
+
+static int ogp_bitbang_get_miso(void)
+{
+ uint32_t tmp;
+
+ tmp = pci_mmio_readl(ogp_spibar + ogp_reg_siso);
+ return tmp & 0x1;
+}
+
+static const struct bitbang_spi_master bitbang_spi_master_ogp = {
+ .type = BITBANG_SPI_MASTER_OGP,
+ .set_cs = ogp_bitbang_set_cs,
+ .set_sck = ogp_bitbang_set_sck,
+ .set_mosi = ogp_bitbang_set_mosi,
+ .get_miso = ogp_bitbang_get_miso,
+ .request_bus = ogp_request_spibus,
+ .release_bus = ogp_release_spibus,
+};
+
+int ogp_spi_init(void)
+{
+ char *type;
+
+ type = extract_programmer_param("rom");
+
+ if (!type) {
+ msg_perr("Please use flashrom -p ogp_spi:rom=... to specify "
+ "which flashchip you want to access.\n");
+ return 1;
+ } else if (!strcasecmp(type, "bprom") || !strcasecmp(type, "bios")) {
+ ogp_reg_sel = OGA1_XP10_BPROM_REG_SEL;
+ ogp_reg_siso = OGA1_XP10_BPROM_SI;
+ ogp_reg__ce = OGA1_XP10_BPROM_CE_BAR;
+ ogp_reg_sck = OGA1_XP10_BPROM_SCK;
+ } else if (!strcasecmp(type, "cprom") || !strcasecmp(type, "s3")) {
+ ogp_reg_sel = OGA1_XP10_CPROM_REG_SEL;
+ ogp_reg_siso = OGA1_XP10_CPROM_SI;
+ ogp_reg__ce = OGA1_XP10_CPROM_CE_BAR;
+ ogp_reg_sck = OGA1_XP10_CPROM_SCK;
+ } else {
+ msg_perr("Invalid or missing rom= parameter.\n");
+ return 1;
+ }
+
+ get_io_perms();
+
+ io_base_addr = pcidev_init(PCI_VENDOR_ID_OGP, PCI_BASE_ADDRESS_0,
+ ogp_spi);
+
+ ogp_spibar = physmap("OGP registers", io_base_addr, 4096);
+
+ /* no delay for now. */
+ if (bitbang_spi_init(&bitbang_spi_master_ogp, 0))
+ return 1;
+
+ buses_supported = CHIP_BUSTYPE_SPI;
+ spi_controller = SPI_CONTROLLER_OGP;
+
+ return 0;
+}
+
+int ogp_spi_shutdown(void)
+{
+ physunmap(ogp_spibar, 4096);
+ pci_cleanup(pacc);
+ release_io_perms();
+
+ return 0;
+}
diff --git a/print.c b/print.c
index ae2bd39..86b4fb1 100644
--- a/print.c
+++ b/print.c
@@ -312,6 +312,11 @@ void print_supported(void)
programmer_table[PROGRAMMER_NICINTEL_SPI].name);
print_supported_pcidevs(nics_intel_spi);
#endif
+#if CONFIG_OGP_SPI == 1
+ printf("\nSupported devices for the %s programmer:\n",
+ programmer_table[PROGRAMMER_OGP_SPI].name);
+ print_supported_pcidevs(ogp_spi);
+#endif
}
#if CONFIG_INTERNAL == 1
diff --git a/print_wiki.c b/print_wiki.c
index 1b46dd0..48e0122 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -299,6 +299,9 @@ void print_supported_wiki(void)
#if CONFIG_NICINTEL_SPI == 1
print_supported_pcidevs_wiki(nics_intel_spi);
#endif
+#if CONFIG_OGP_SPI == 1
+ print_supported_pcidevs_wiki(ogp_spi);
+#endif
printf("\n|}\n");
}
diff --git a/programmer.h b/programmer.h
index a447092..345b4f3 100644
--- a/programmer.h
+++ b/programmer.h
@@ -76,6 +76,9 @@ enum programmer {
#if CONFIG_NICINTEL_SPI == 1
PROGRAMMER_NICINTEL_SPI,
#endif
+#if CONFIG_OGP_SPI == 1
+ PROGRAMMER_OGP_SPI,
+#endif
PROGRAMMER_INVALID /* This must always be the last entry. */
};
@@ -121,6 +124,9 @@ enum bitbang_spi_master_type {
BITBANG_SPI_MASTER_MCP,
#endif
#endif
+#if CONFIG_OGP_SPI == 1
+ BITBANG_SPI_MASTER_OGP,
+#endif
};
struct bitbang_spi_master {
@@ -221,7 +227,7 @@ int rpci_write_long(struct pci_dev *dev, int reg, u32 data);
#endif
/* print.c */
-#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL_SPI >= 1
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI >= 1
void print_supported_pcidevs(const struct pcidev_status *devs);
#endif
@@ -402,6 +408,13 @@ void nicintel_spi_chip_writeb(uint8_t val, chipaddr addr);
extern const struct pcidev_status nics_intel_spi[];
#endif
+/* ogp_spi.c */
+#if CONFIG_OGP_SPI == 1
+int ogp_spi_init(void);
+int ogp_spi_shutdown(void);
+extern const struct pcidev_status ogp_spi[];
+#endif
+
/* satasii.c */
#if CONFIG_SATASII == 1
int satasii_init(void);
@@ -523,6 +536,9 @@ enum spi_controller {
#if CONFIG_NICINTEL_SPI == 1
SPI_CONTROLLER_NICINTEL,
#endif
+#if CONFIG_OGP_SPI == 1
+ SPI_CONTROLLER_OGP,
+#endif
SPI_CONTROLLER_INVALID /* This must always be the last entry. */
};
extern const int spi_programmer_count;
diff --git a/spi.c b/spi.c
index 3df7458..7d76120 100644
--- a/spi.c
+++ b/spi.c
@@ -146,6 +146,15 @@ const struct spi_programmer spi_programmer[] = {
},
#endif
+#if CONFIG_OGP_SPI == 1
+ { /* SPI_CONTROLLER_OGP */
+ .command = bitbang_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = bitbang_spi_read,
+ .write_256 = bitbang_spi_write_256,
+ },
+#endif
+
{}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */
};
OpenPOWER on IntegriCloud