path: root/usr.sbin/pc-sysinstall/backend/functions-bsdlabel.sh

#!/bin/sh
#-
# Copyright (c) 2010 iXsystems, Inc.  All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$

# Functions related to disk operations using bsdlabel

# Check if we are are provided a geli password on the nextline of the config
check_for_enc_pass()
{
  CURLINE="${1}"
 
  get_next_cfg_line "${CFGF}" "${CURLINE}" 
  echo ${VAL} | grep "^encpass=" >/dev/null 2>/dev/null
  if [ "$?" = "0" ] ; then
    # Found a password, return it
    get_value_from_string "${VAL}"
    return
  fi

  VAL="" ; export VAL
  return
};

# On check on the disk-label line if we have any extra vars for this device
# Only enabled for ZFS devices now, may add other xtra options in future for other FS's
get_fs_line_xvars()
{
  ACTIVEDEV="${1}"
  LINE="${2}"

  echo $LINE | grep ' (' >/dev/null 2>/dev/null
  if [ "$?" = "0" ] ; then

    # See if we are looking for ZFS specific options
    echo $LINE | grep '^ZFS' >/dev/null 2>/dev/null
    if [ "$?" = "0" ] ; then
      ZTYPE="NONE"
      ZFSVARS="`echo $LINE | cut -d '(' -f 2- | cut -d ')' -f 1 | xargs`"

      echo $ZFSVARS | grep -E "^(disk|file|mirror|raidz(1|2)?|spare|log|cache):" >/dev/null 2>/dev/null
	  if [ "$?" = "0" ] ; then
       ZTYPE=`echo $ZFSVARS | cut -f1 -d:`
       ZFSVARS=`echo $ZFSVARS | sed "s|$ZTYPE: ||g" | sed "s|$ZTYPE:||g"`
	  fi

      # Return the ZFS options
      if [ "${ZTYPE}" = "NONE" ] ; then
        VAR="${ACTIVEDEV} ${ZFSVARS}"
      else
        VAR="${ZTYPE} ${ACTIVEDEV} ${ZFSVARS}"
      fi
      export VAR
      return
    fi # End of ZFS block

  fi # End of xtra-options block

  # If we got here, set VAR to empty and export
  VAR=""
  export VAR
  return
};

# Init each zfs mirror disk with a boot sector so we can failover
setup_zfs_mirror_parts()
{
  _nZFS=""

  # Using mirroring, setup boot partitions on each disk
  _mirrline="`echo ${1} | sed 's|mirror ||g'`"
  for _zvars in $_mirrline
  do
    echo "Looping through _zvars: $_zvars" >>${LOGOUT}
    echo "$_zvars" | grep "${2}" >/dev/null 2>/dev/null
    if [ "$?" = "0" ] ; then continue ; fi
    if [ -z "$_zvars" ] ; then continue ; fi

    is_disk "$_zvars" >/dev/null 2>/dev/null
    if [ "$?" = "0" ] ; then
      echo "Setting up ZFS mirror disk $_zvars" >>${LOGOUT}
      init_gpt_full_disk "$_zvars" >/dev/null 2>/dev/null
      rc_halt "gpart bootcode -p /boot/gptzfsboot -i 1 ${_zvars}" >/dev/null 2>/dev/null
      rc_halt "gpart add -t freebsd-zfs ${_zvars}" >/dev/null 2>/dev/null
      _nZFS="$_nZFS ${_zvars}p2"	
    else
      _nZFS="$_nZFS ${_zvars}"	
    fi	
  done
  echo "mirror $2 `echo $_nZFS | tr -s ' '`"
} ;

# Function which creates a unique label name for the specified mount
gen_glabel_name()
{
  MOUNT="$1"
  TYPE="$2"
  NUM="0"
  MAXNUM="20"

  # Check if we are doing /, and rename it
  if [ "$MOUNT" = "/" ]
  then
    NAME="rootfs"
  else
    # If doing a swap partition, also rename it
    if [ "${TYPE}" = "SWAP" ]
    then
      NAME="swap"
    else
      NAME="`echo $MOUNT | sed 's|/||g' | sed 's| ||g'`"
    fi
  fi

  # Loop through and break when we find our first available label
  while
  Z=1
  do
    glabel status | grep "${NAME}${NUM}" >/dev/null 2>/dev/null
    if [ "$?" != "0" ]
    then
      break
    else
      NUM="`expr ${NUM} + 1`"
    fi

    if [ $NUM -gt $MAXNUM ]
    then
      exit_err "Cannot allocate additional glabel name for $NAME"
      break
    fi
  done 
   

  VAL="${NAME}${NUM}" 
  export VAL
};

# Function to setup / stamp a legacy MBR bsdlabel
setup_mbr_partitions()
{
  DISKTAG="$1"
  WRKSLICE="$2"
  FOUNDPARTS="1"


  # Lets setup the BSDLABEL
  BSDLABEL="${TMPDIR}/bsdLabel-${WRKSLICE}"
  export BSDLABEL
  rm $BSDLABEL >/dev/null 2>/dev/null
  echo "# /dev/${WRKSLICE}" >>$BSDLABEL
  echo "8 partitions:" >>$BSDLABEL
  echo "#	size	offset	fstype	bsize	bps/cpg" >>$BSDLABEL
   
  PARTLETTER="a"

  # Lets read in the config file now and populate this
  while read line
  do
    # Check for data on this slice
    echo $line | grep "^${DISKTAG}-part=" >/dev/null 2>/dev/null
    if [ "$?" = "0" ]
    then
      # Found a slice- entry, lets get the slice info
      get_value_from_string "${line}"
      STRING="$VAL"
      FOUNDPARTS="0"

      # We need to split up the string now, and pick out the variables
      FS=`echo $STRING | tr -s '\t' ' ' | cut -d ' ' -f 1` 
      SIZE=`echo $STRING | tr -s '\t' ' ' | cut -d ' ' -f 2` 
      MNT=`echo $STRING | tr -s '\t' ' ' | cut -d ' ' -f 3` 

      # Check if we have a .eli extension on this FS
      echo ${FS} | grep ".eli" >/dev/null 2>/dev/null
      if [ "$?" = "0" ]
      then
        FS="`echo ${FS} | cut -d '.' -f 1`"
        ENC="ON"
        check_for_enc_pass "${line}"
        if [ "${VAL}" != "" ] ; then
          # We have a user supplied password, save it for later
          ENCPASS="${VAL}" 
        fi
      else
        ENC="OFF"
      fi

      # Check if the user tried to setup / as an encrypted partition
      check_for_mount "${MNT}" "/"
      if [ "${?}" = "0" -a "${ENC}" = "ON" ]
      then
        USINGENCROOT="0" ; export USINGENCROOT
      fi
          
      # Now check that these values are sane
      case $FS in
        UFS|UFS+S|UFS+J|ZFS|SWAP) ;;
       *) exit_err "ERROR: Invalid file system specified on $line" ;;
      esac

      # Check that we have a valid size number
      expr $SIZE + 1 >/dev/null 2>/dev/null
      if [ "$?" != "0" ]; then
        exit_err "ERROR: The size specified on $line is invalid"
      fi

      # Check that the mount-point starts with /
      echo "$MNT" | grep -e "^/" -e "^none" >/dev/null 2>/dev/null
      if [ "$?" != "0" ]; then
        exit_err "ERROR: The mount-point specified on $line is invalid"
      fi

      if [ "$SIZE" = "0" ]
      then
        SOUT="*"
      else
        SOUT="${SIZE}M"
      fi

      # OK, we passed all tests, now lets put these values into a config
      # If the part
      if [ "${PARTLETTER}" = "a" ]
      then
        if [ "$FS" = "SWAP" ]
        then
          echo "a:	${SOUT}	*	swap	0	0" >>${BSDLABEL}
        else
          echo "a:	${SOUT}	0	4.2BSD	0	0" >>${BSDLABEL}
        fi

        # Check if we found a valid root partition
        check_for_mount "${MNT}" "/"
        if [ "$?" = "0" ] ; then
            FOUNDROOT="0" ; export FOUNDROOT
        fi

        # Check if we have a "/boot" instead
        check_for_mount "${MNT}" "/boot"
        if [ "${?}" = "0" ] ; then
          USINGBOOTPART="0" ; export USINGBOOTPART
          if [ "${FS}" != "UFS" -a "${FS}" != "UFS+S" -a "${FS}" != "UFS+J" ]
          then
            exit_err "/boot partition must be formatted with UFS"
          fi
        fi

      else
        # Done with the a: partitions

        # Check if we found a valid root partition not on a:
        check_for_mount "${MNT}" "/"
        if [ "${?}" = "0" ] ; then
          FOUNDROOT="1" ; export FOUNDROOT
        fi

        # Check if we have a /boot partition, and fail since its not first
        check_for_mount "${MNT}" "/boot"
        if [ "${?}" = "0" ] ; then
          exit_err "/boot partition must be first partition"
        fi


        if [ "$FS" = "SWAP" ]
        then
          echo "${PARTLETTER}:	${SOUT}	*	swap" >>${BSDLABEL}
        else
          echo "${PARTLETTER}:	${SOUT}	*	4.2BSD" >>${BSDLABEL}
        fi
      fi

      # Generate a unique label name for this mount
      gen_glabel_name "${MNT}" "${FS}"
      PLABEL="${VAL}"
      
      # Get any extra options for this fs / line
      get_fs_line_xvars "${WRKSLICE}${PARTLETTER}" "${STRING}"
      XTRAOPTS="${VAR}"

      # Check if using zfs mirror
      echo ${XTRAOPTS} | grep "mirror" >/dev/null 2>/dev/null
      if [ "$?" = "0" ] ; then
       	XTRAOPTS=$(setup_zfs_mirror_parts "$XTRAOPTS" "${WRKSLICE}${PARTLETTER}")
      fi

      # Save this data to our partition config dir
      echo "${FS}:${MNT}:${ENC}:${PLABEL}:MBR:${XTRAOPTS}" >${PARTDIR}/${WRKSLICE}${PARTLETTER}

      # If we have a enc password, save it as well
      if [ ! -z "${ENCPASS}" ] ; then
        echo "${ENCPASS}" >${PARTDIR}-enc/${WRKSLICE}${PARTLETTER}-encpass
      fi

      # This partition letter is used, get the next one
      case ${PARTLETTER} in
        a) PARTLETTER="b" ;;
        b) # When we hit b, add the special c: setup for bsdlabel 
           echo "c:	*	*	unused" >>${BSDLABEL}
           PARTLETTER="d" ;;
        d) PARTLETTER="e" ;;
        e) PARTLETTER="f" ;;
        f) PARTLETTER="g" ;;
        g) PARTLETTER="h" ;;
        h) PARTLETTER="ERR" ;;
        *) exit_err "ERROR: bsdlabel only supports up to letter h for partitions." ;;
      esac

    fi # End of subsection locating a slice in config

    echo $line | grep "^commitDiskLabel" >/dev/null 2>/dev/null
    if [ "$?" = "0" -a "${FOUNDPARTS}" = "0" ]
    then
      # Found our flag to commit this label setup, check that we found at least 1 partition and do it
      if [ "${PARTLETTER}" != "a" ]
      then
        # Check if we only had 1 partition, and make sure we add "c:" section to label
        if [ "${PARTLETTER}" = "b" ]
        then
             echo "c:	*	*	unused" >>${BSDLABEL}
        fi

        echo "bsdlabel -R -B /dev/${WRKSLICE} ${BSDLABEL}"
        bsdlabel -R -B ${WRKSLICE} ${BSDLABEL}

        break
      else
        exit_err "ERROR: commitDiskLabel was called without any partition entries for it!"
      fi
    fi
  done <${CFGF}
};

# Function to setup partitions using gpt
setup_gpt_partitions()
{
  DISKTAG="$1"
  DISK="$2"
  FOUNDPARTS="1"

  # Lets read in the config file now and setup our GPT partitions
  CURPART="2"
  while read line
  do
    # Check for data on this slice
    echo $line | grep "^${DISKTAG}-part=" >/dev/null 2>/dev/null
    if [ "$?" = "0" ]
    then
      FOUNDPARTS="0"
      # Found a slice- entry, lets get the slice info
      get_value_from_string "${line}"
      STRING="$VAL"

      # We need to split up the string now, and pick out the variables
      FS=`echo $STRING | tr -s '\t' ' ' | cut -d ' ' -f 1` 
      SIZE=`echo $STRING | tr -s '\t' ' ' | cut -d ' ' -f 2` 
      MNT=`echo $STRING | tr -s '\t' ' ' | cut -d ' ' -f 3` 

      # Check if we have a .eli extension on this FS
      echo ${FS} | grep ".eli" >/dev/null 2>/dev/null
      if [ "$?" = "0" ]
      then
        FS="`echo ${FS} | cut -d '.' -f 1`"
        ENC="ON"
        check_for_enc_pass "${line}"
        if [ "${VAL}" != "" ] ; then
          # We have a user supplied password, save it for later
          ENCPASS="${VAL}" 
        fi
      else
        ENC="OFF"
      fi

      # Check if the user tried to setup / as an encrypted partition
      check_for_mount "${MNT}" "/"
      if [ "${?}" = "0" -a "${ENC}" = "ON" ]
      then
        USINGENCROOT="0" ; export USINGENCROOT
      fi
          
      # Now check that these values are sane
      case $FS in
        UFS|UFS+S|UFS+J|ZFS|SWAP) ;;
       *) exit_err "ERROR: Invalid file system specified on $line" ;;
      esac

      # Check that we have a valid size number
      expr $SIZE + 1 >/dev/null 2>/dev/null
      if [ "$?" != "0" ]; then
        exit_err "ERROR: The size specified on $line is invalid"
      fi

      # Check that the mount-point starts with /
      echo "$MNT" | grep -e "^/" -e "^none" >/dev/null 2>/dev/null
      if [ "$?" != "0" ]; then
        exit_err "ERROR: The mount-point specified on $line is invalid"
      fi

      if [ "$SIZE" = "0" ]
      then
        SOUT=""
      else
        SOUT="-s ${SIZE}M"
      fi

      # Check if we found a valid root partition
      check_for_mount "${MNT}" "/"
      if [ "${?}" = "0" ] ; then
        if [ "${CURPART}" = "2" ] ; then
          FOUNDROOT="0" ; export FOUNDROOT
        else
          FOUNDROOT="1" ; export FOUNDROOT
        fi
      fi

      check_for_mount "${MNT}" "/boot"
      if [ "${?}" = "0" ] ; then
        if [ "${CURPART}" = "2" ] ; then
          USINGBOOTPART="0" ; export USINGBOOTPART
          if [ "${FS}" != "UFS" -a "${FS}" != "UFS+S" -a "${FS}" != "UFS+J" ]
          then
            exit_err "/boot partition must be formatted with UFS"
          fi
        else
            exit_err "/boot partition must be first partition"
        fi
      fi

      # Generate a unique label name for this mount
      gen_glabel_name "${MNT}" "${FS}"
      PLABEL="${VAL}"

      # Get any extra options for this fs / line
      get_fs_line_xvars "${DISK}p${CURPART}" "${STRING}"
      XTRAOPTS="${VAR}"

      # Check if using zfs mirror
      echo ${XTRAOPTS} | grep "mirror" >/dev/null 2>/dev/null
      if [ "$?" = "0" ] ; then
       	XTRAOPTS=$(setup_zfs_mirror_parts "$XTRAOPTS" "${DISK}p${CURPART}")
      fi

      # Figure out the gpart type to use
      case ${FS} in
        ZFS) PARTYPE="freebsd-zfs" ;;
        SWAP) PARTYPE="freebsd-swap" ;;
        *) PARTYPE="freebsd-ufs" ;;
      esac

      # Create the partition
      rc_halt "gpart add ${SOUT} -t ${PARTYPE} ${DISK}"

      # Check if this is a root / boot partition, and stamp the right loader
      for TESTMNT in `echo ${MNT} | sed 's|,| |g'`
      do
        if [ "${TESTMNT}" = "/" -a -z "${BOOTTYPE}" ] ; then
           BOOTTYPE="${PARTYPE}" 
        fi 
        if [ "${TESTMNT}" = "/boot" ]  ; then
           BOOTTYPE="${PARTYPE}" 
        fi 
      done 

      # Save this data to our partition config dir
      echo "${FS}:${MNT}:${ENC}:${PLABEL}:GPT:${XTRAOPTS}" >${PARTDIR}/${DISK}p${CURPART}

      # Clear out any headers
      sleep 2
      dd if=/dev/zero of=${DISK}p${CURPART} count=2048 >/dev/null 2>/dev/null

      # If we have a enc password, save it as well
      if [ ! -z "${ENCPASS}" ] ; then
        echo "${ENCPASS}" >${PARTDIR}-enc/${DISK}p${CURPART}-encpass
      fi

      # Increment our parts counter
      CURPART="`expr ${CURPART} + 1`"

    fi # End of subsection locating a slice in config

    echo $line | grep "^commitDiskLabel" >/dev/null 2>/dev/null
    if [ "$?" = "0" -a "${FOUNDPARTS}" = "0" ]
    then

      # If this is the boot disk, stamp the right gptboot
      if [ ! -z "${BOOTTYPE}" ] ; then
        case ${BOOTTYPE} in
          freebsd-ufs) rc_halt "gpart bootcode -p /boot/gptboot -i 1 ${DISK}" ;;
          freebsd-zfs) rc_halt "gpart bootcode -p /boot/gptzfsboot -i 1 ${DISK}" ;;
        esac 
      fi


      # Found our flag to commit this label setup, check that we found at least 1 partition
      if [ "${CURPART}" = "2" ] ; then
        exit_err "ERROR: commitDiskLabel was called without any partition entries for it!"
      fi

      break
    fi
  done <${CFGF}
};

# Reads through the config and sets up a BSDLabel for the given slice
populate_disk_label()
{
  if [ -z "${1}" ]
  then
    exit_err "ERROR: populate_disk_label() called without argument!"
  fi

  # Set some vars from the given working slice
  disk="`echo $1 | cut -d '-' -f 1`" 
  slicenum="`echo $1 | cut -d '-' -f 2`" 
  type="`echo $1 | cut -d '-' -f 3`" 
  
  # Set WRKSLICE based upon format we are using
  if [ "$type" = "mbr" ] ; then
    wrkslice="${disk}s${slicenum}"
  fi
  if [ "$type" = "gpt" ] ; then
    wrkslice="${disk}p${slicenum}"
  fi

  if [ -e "${SLICECFGDIR}/${wrkslice}" ]
  then
    disktag="`cat ${SLICECFGDIR}/${wrkslice}`"
  else
    exit_err "ERROR: Missing SLICETAG data. This shouldn't happen - please let the developers know"
  fi

  # Using Traditional MBR for dual-booting
  if [ "$type" = "mbr" ] ; then
    setup_mbr_partitions "${disktag}" "${wrkslice}"
  fi

  # Using entire disk mode, use GPT for this
  if [ "$type" = "gpt" ] ; then
    setup_gpt_partitions "${disktag}" "${disk}"
  fi

};

# Function which reads in the disk slice config, and performs it
setup_disk_label()
{
  # We are ready to start setting up the label, lets read the config and do the actions
  # First confirm that we have a valid WORKINGSLICES
  if [ -z "${WORKINGSLICES}" -a -z "${WORKINGIMAGES}" ]; then
    exit_err "ERROR: No slices were setup! Please report this to the maintainers"
  fi

  # Check that the slices we have did indeed get setup and gpart worked
  for i in $WORKINGSLICES
  do
    disk="`echo $i | cut -d '-' -f 1`" 
    pnum="`echo $i | cut -d '-' -f 2`" 
    type="`echo $i | cut -d '-' -f 3`" 
    if [ "$type" = "mbr" -a ! -e "/dev/${disk}s${pnum}" ] ; then
      exit_err "ERROR: The partition ${i} doesn't exist! gpart failure!"
    fi
    if [ "$type" = "gpt" -a ! -e "/dev/${disk}p${pnum}" ] ; then
      exit_err "ERROR: The partition ${i} doesn't exist! gpart failure!"
    fi
  done

  # Setup some files which we'll be referring to
  LABELLIST="${TMPDIR}/workingLabels"
  export LABELLIST
  rm $LABELLIST >/dev/null 2>/dev/null

  # Set our flag to determine if we've got a valid root partition in this setup
  FOUNDROOT="-1"
  export FOUNDROOT

  # Check if we are using a /boot partition
  USINGBOOTPART="1"
  export USINGBOOTPART
 
  # Set encryption on root check
  USINGENCROOT="1" ; export USINGENCROOT
  
  # Make the tmp directory where we'll store FS info & mount-points
  rm -rf ${PARTDIR} >/dev/null 2>/dev/null
  mkdir -p ${PARTDIR} >/dev/null 2>/dev/null
  rm -rf ${PARTDIR}-enc >/dev/null 2>/dev/null
  mkdir -p ${PARTDIR}-enc >/dev/null 2>/dev/null

  for i in $WORKINGSLICES
  do
    populate_disk_label "${i}"
  done

  for i in $WORKINGIMAGES
  do
    image=`echo "${i}"|cut -f2 -d:`
    check_image_layout "${image}" 
  done

  # Check if we made a root partition
  if [ "$FOUNDROOT" = "-1" ]
  then
    exit_err "ERROR: No root (/) partition specified!!"
  fi

  # Check if we made a root partition
  if [ "$FOUNDROOT" = "1" -a "${USINGBOOTPART}" != "0" ]
  then
    exit_err "ERROR: (/) partition isn't first partition on disk!"
  fi

  if [ "${USINGENCROOT}" = "0" -a "${USINGBOOTPART}" != "0" ]
  then
    exit_err "ERROR: Can't encrypt (/) with no (/boot) partition!"
  fi
};

check_fstab_mbr()
{
  local SLICE
  local FSTAB

  if [ -z "$2" ]
  then
	return 1
  fi

  SLICE="$1"
  FSTAB="$2/etc/fstab"

  if [ -f "${FSTAB}" ]
  then
    PARTLETTER=`echo "$SLICE" | sed -E 's|^.+([a-h])$|\1|'`

    grep -E '^.+ +/ +' "${FSTAB}" >/dev/null 2>&1
    if [ "$?" = "0" ]
    then
      if [ "${PARTLETTER}" = "a" ]
      then
        FOUNDROOT="0"
      else
        FOUNDROOT="1"
      fi
      export FOUNDROOT
    fi

    grep -E '^.+ +/boot +' "${FSTAB}" >/dev/null 2>&1
    if [ "$?" = "0" ]
    then
      if [ "${PARTLETTER}" = "a" ]
      then
        USINGBOOTPART="0"
      else 
        exit_err "/boot partition must be first partition"
      fi 
      export USINGBOOTPART
    fi

    return 0
  fi

  return 1
};

check_fstab_gpt()
{
  local SLICE
  local FSTAB

  if [ -z "$2" ]
  then
	return 1
  fi

  SLICE="$1"
  FSTAB="$2/etc/fstab"

  if [ -f "${FSTAB}" ]
  then
    PARTNUMBER=`echo "${SLICE}" | sed -E 's|^.+p([0-9]*)$|\1|'`

    grep -E '^.+ +/ +' "${FSTAB}" >/dev/null 2>&1
    if [ "$?" = "0" ]
    then
      if [ "${PARTNUMBER}" = "2" ]
      then
        FOUNDROOT="0"
      else
        FOUNDROOT="1"
      fi
      export FOUNDROOT
    fi

    grep -E '^.+ +/boot +' "${FSTAB}" >/dev/null 2>&1
    if [ "$?" = "0" ]
    then
      if [ "${PARTNUMBER}" = "2" ]
      then
        USINGBOOTPART="0"
      else 
        exit_err "/boot partition must be first partition"
      fi 
      export USINGBOOTPART
    fi

    return 0
  fi


  return 1
};

check_image_layout()
{
  local SLICES
  local IMAGE
  local TYPE
  local RES
  local MD
  local F

  IMAGE="$1"
  TYPE="MBR"

  if [ -z "${IMAGE}" ]
  then
	return 1
  fi

  MD=`mdconfig -af "${IMAGE}"`
  if [ "$?" != "0" ]
  then
	return 1
  fi

  SLICES=`ls /dev/${MD}s[1-4]*[a-h]* 2>/dev/null`
  if [ "$?" != "0" ]
  then
    SLICES=`ls /dev/${MD}p[0-9]* 2>/dev/null`
    if [ -n "${SLICES}" ]
    then
      TYPE="GPT"
      RES=0
    fi
  else
    RES=0
  fi

  for slice in ${SLICES}
  do
    F=1
    mount ${slice} /mnt 2>/dev/null
    if [ "$?" != "0" ]
    then
      continue
    fi 

    if [ "${TYPE}" = "MBR" ]
    then
	  check_fstab_mbr "${slice}" "/mnt"
      F="$?"

    elif [ "${TYPE}" = "GPT" ]
    then
	  check_fstab_gpt "${slice}" "/mnt"
      F="$?"
    fi 

    if [ "${F}" = "0" ]
    then
      umount /mnt
      break 
    fi

    umount /mnt
  done

  mdconfig -d -u "${MD}"
  return ${RES}
};