summaryrefslogtreecommitdiffstats
path: root/sys/pci/ahc_pci.c
blob: 818e491f9ad76be5e09491fac69b026f52896897 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
/*
 * Product specific probe and attach routines for:
 *      3940, 2940, aic7895, aic7890, aic7880,
 *	aic7870, aic7860 and aic7850 SCSI controllers
 *
 * Copyright (c) 1995, 1996, 1997, 1998 Justin T. Gibbs
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification, immediately at the beginning of the file.
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * Where this Software is combined with software released under the terms of 
 * the GNU Public License ("GPL") and the terms of the GPL would require the 
 * combined work to also be released under the terms of the GPL, the terms
 * and conditions of this License will apply in addition to those of the
 * GPL with the exception of any terms or conditions of this License that
 * conflict with, or are expressly prohibited by, the GPL.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	$Id: ahc_pci.c,v 1.8 1999/03/23 07:26:41 gibbs Exp $
 */

#include <pci.h>
#if NPCI > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>

#include <pci/pcireg.h>
#include <pci/pcivar.h>

#include <machine/bus_memio.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <machine/clock.h>
#include <sys/rman.h>

#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>

#include <cam/scsi/scsi_all.h>

#include <dev/aic7xxx/aic7xxx.h>
#include <dev/aic7xxx/93cx6.h>

#include <aic7xxx_reg.h>

#define AHC_PCI_IOADDR	PCIR_MAPS		/* I/O Address */
#define AHC_PCI_MEMADDR	(PCIR_MAPS + 4)	/* Mem I/O Address */

#define PCI_DEVICE_ID_ADAPTEC_398XU	0x83789004ul
#define PCI_DEVICE_ID_ADAPTEC_3940U	0x82789004ul
#define PCI_DEVICE_ID_ADAPTEC_3950U2	0x00509005ul
#define PCI_DEVICE_ID_ADAPTEC_2944U	0x84789004ul
#define PCI_DEVICE_ID_ADAPTEC_2940U	0x81789004ul
#define PCI_DEVICE_ID_ADAPTEC_2940AU	0x61789004ul
#define PCI_DEVICE_ID_ADAPTEC_2940U2	0x00109005ul
#define PCI_DEVICE_ID_ADAPTEC_2930U2	0x00119005ul
#define PCI_DEVICE_ID_ADAPTEC_398X	0x73789004ul
#define PCI_DEVICE_ID_ADAPTEC_3940	0x72789004ul
#define PCI_DEVICE_ID_ADAPTEC_2944	0x74789004ul
#define PCI_DEVICE_ID_ADAPTEC_2940	0x71789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7890	0x001F9005ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7895C	0x78939004ul /* RAID Port */
#define PCI_DEVICE_ID_ADAPTEC_AIC7895	0x78959004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7896	0x005F9005ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7880	0x80789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7870	0x70789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7860	0x60789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7855	0x55789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7850	0x50789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7810	0x10789004ul
#define PCI_DEVICE_ID_ADAPTEC_AIC7815	0x15789004ul

#define AHC_394X_SLOT_CHANNEL_A	4
#define AHC_394X_SLOT_CHANNEL_B	5

#define AHC_398X_SLOT_CHANNEL_A	4
#define AHC_398X_SLOT_CHANNEL_B	8
#define AHC_398X_SLOT_CHANNEL_C	12

#define	DEVCONFIG		0x40
#define		SCBSIZE32	0x00010000ul	/* aic789X only */
#define		MPORTMODE	0x00000400ul	/* aic7870 only */
#define		RAMPSM		0x00000200ul	/* aic7870 only */
#define		VOLSENSE	0x00000100ul
#define		SCBRAMSEL	0x00000080ul
#define		MRDCEN		0x00000040ul
#define		EXTSCBTIME	0x00000020ul	/* aic7870 only */
#define		EXTSCBPEN	0x00000010ul	/* aic7870 only */
#define		BERREN		0x00000008ul
#define		DACEN		0x00000004ul
#define		STPWLEVEL	0x00000002ul
#define		DIFACTNEGEN	0x00000001ul	/* aic7870 only */

#define	CSIZE_LATTIME		0x0c
#define		CACHESIZE	0x0000003ful	/* only 5 bits */
#define		LATTIME		0x0000ff00ul

static void check_extport(struct ahc_softc *ahc, u_int *sxfrctl1);
static void configure_termination(struct ahc_softc *ahc,
				  struct seeprom_config *sc,
				  struct seeprom_descriptor *sd,
	 			  u_int *sxfrctl1);

static void ahc_ultra2_term_detect(struct ahc_softc *ahc,
				   int *enableSEC_low,
				   int *enableSEC_high,
				   int *enablePRI_low,
				   int *enablePRI_high,
				   int *eeprom_present);
static void aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
				 int *internal68_present,
				 int *externalcable_present,
				 int *eeprom_present);
static void aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
				 int *externalcable_present,
				 int *eeprom_present);
static int acquire_seeprom(struct ahc_softc *ahc,
			   struct seeprom_descriptor *sd);
static void release_seeprom(struct seeprom_descriptor *sd);
static void write_brdctl(struct ahc_softc *ahc, u_int8_t value);
static u_int8_t read_brdctl(struct ahc_softc *ahc);

static struct ahc_softc *first_398X;

static int ahc_pci_probe(device_t dev);
static int ahc_pci_attach(device_t dev);

/* Exported for use in the ahc_intr routine */
void ahc_pci_intr(struct ahc_softc *ahc);

static device_method_t ahc_pci_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		ahc_pci_probe),
	DEVMETHOD(device_attach,	ahc_pci_attach),
	{ 0, 0 }
};

static driver_t ahc_pci_driver = {
	"ahc",
	ahc_pci_methods,
	DRIVER_TYPE_CAM,
	sizeof(struct ahc_softc)
};

static devclass_t ahc_devclass;

DRIVER_MODULE(ahc, pci, ahc_pci_driver, ahc_devclass, 0, 0);

static int
ahc_pci_probe(device_t dev)
{
	const char *name = NULL;

	switch (pci_get_devid(dev)) {
	case PCI_DEVICE_ID_ADAPTEC_398XU:
		name = "Adaptec 398X Ultra SCSI RAID adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_3940U:
		name = "Adaptec 3940 Ultra SCSI host adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_398X:
		name  = "Adaptec 398X SCSI RAID adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_3940:
		name = "Adaptec 3940 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_3950U2:
		name = "Adaptec 3950 Ultra2 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2930U2:
		name = "Adaptec 2930 Ultra2 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2944U:
		name = "Adaptec 2944 Ultra SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2940U:
		name = "Adaptec 2940 Ultra SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2940U2:
		name = "Adaptec 2940 Ultra2 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2944:
		name = "Adaptec 2944 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2940:
		name = "Adaptec 2940 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_2940AU:
		name = "Adaptec 2940A Ultra SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7895:
		name = "Adaptec aic7895 Ultra SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7895C:
		name = "Adaptec aic7895 `Raid Port' Ultra SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7890:
		name = "Adaptec aic7890/91 Ultra2 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7896:
		name = "Adaptec aic7896/97 Ultra2 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7880:
		name = "Adaptec aic7880 Ultra SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7870:
		name = "Adaptec aic7870 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7860:
		name = "Adaptec aic7860 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7855:
		name = "Adaptec aic7855 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7850:
		name = "Adaptec aic7850 SCSI adapter";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7810:
		name = "Adaptec aic7810 RAID memory controller";
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7815:
		name = "Adaptec aic7815 RAID memory controller";
		break;
	default:
		break;
	}
	if (name != NULL) {
		device_set_desc(dev, name);
		return (0);
	}
	return (ENXIO);
}

static int
ahc_pci_attach(device_t dev)
{
	bus_dma_tag_t	   parent_dmat;
	struct		   resource *regs;
	struct		   ahc_softc *ahc;
	u_int32_t	   command;
	struct scb_data   *shared_scb_data;
	ahc_chip	   ahc_t = AHC_NONE;
	ahc_feature	   ahc_fe = AHC_FENONE;
	ahc_flag	   ahc_f = AHC_FNONE;
	int		   regs_type;
	int		   regs_id;
	u_int		   our_id = 0;
	u_int		   sxfrctl1;
	u_int		   scsiseq;
	int		   error;
	int		   zero;
	char		   channel;

	if (pci_get_function(dev) == 1)
		channel = 'B';
	else
		channel = 'A';
	shared_scb_data = NULL;
	command = pci_read_config(dev, PCIR_COMMAND, /*bytes*/1);

	switch (pci_get_devid(dev)) {
	case PCI_DEVICE_ID_ADAPTEC_398XU:
	case PCI_DEVICE_ID_ADAPTEC_398X:
		if (pci_get_devid(dev) == PCI_DEVICE_ID_ADAPTEC_398XU) {
			ahc_t = AHC_AIC7880;
			ahc_fe = AHC_AIC7880_FE;
		} else {
			ahc_t = AHC_AIC7870;
			ahc_fe = AHC_AIC7870_FE;
		}

		switch (pci_get_slot(dev)) {
		case AHC_398X_SLOT_CHANNEL_A:
			break;
		case AHC_398X_SLOT_CHANNEL_B:
			channel = 'B';
			break;
		case AHC_398X_SLOT_CHANNEL_C:
			channel = 'C';
			break;
		default:
			printf("adapter at unexpected slot %d\n"
			       "unable to map to a channel\n",
			       pci_get_slot(dev));
		}
		ahc_f |= AHC_LARGE_SEEPROM;
		break;
	case PCI_DEVICE_ID_ADAPTEC_3940U:
	case PCI_DEVICE_ID_ADAPTEC_3940:
		if (pci_get_devid(dev)) {
			ahc_t = AHC_AIC7880;
			ahc_fe = AHC_AIC7880_FE;
		} else {
			ahc_t = AHC_AIC7870;
			ahc_fe = AHC_AIC7870_FE;
		}

		switch (pci_get_slot(dev)) {
		case AHC_394X_SLOT_CHANNEL_A:
			break;
		case AHC_394X_SLOT_CHANNEL_B:
			channel = 'B';
			break;
		default:
			printf("adapter at unexpected slot %d\n"
			       "unable to map to a channel\n",
			       pci_get_slot(dev));
		}
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7890:
	case PCI_DEVICE_ID_ADAPTEC_2940U2:
	case PCI_DEVICE_ID_ADAPTEC_2930U2:
	{
		ahc_t = AHC_AIC7890;
		ahc_fe = AHC_AIC7890_FE;
		break;
	}
	case PCI_DEVICE_ID_ADAPTEC_AIC7896:
	case PCI_DEVICE_ID_ADAPTEC_3950U2:
	{
		ahc_t = AHC_AIC7896;
		ahc_fe = AHC_AIC7896_FE;
		break;
	}
	case PCI_DEVICE_ID_ADAPTEC_2944U:
	case PCI_DEVICE_ID_ADAPTEC_2940U:
	case PCI_DEVICE_ID_ADAPTEC_AIC7880:
		ahc_t = AHC_AIC7880;
		ahc_fe = AHC_AIC7880_FE;
		break;
	case PCI_DEVICE_ID_ADAPTEC_2944:
	case PCI_DEVICE_ID_ADAPTEC_2940:
	case PCI_DEVICE_ID_ADAPTEC_AIC7870:
		ahc_t = AHC_AIC7870;
		ahc_fe = AHC_AIC7870_FE;
		break;
	case PCI_DEVICE_ID_ADAPTEC_2940AU:
	case PCI_DEVICE_ID_ADAPTEC_AIC7860:
		ahc_fe = AHC_AIC7860_FE;
		ahc_t = AHC_AIC7860;
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7895:
	case PCI_DEVICE_ID_ADAPTEC_AIC7895C:
	{
		u_int32_t devconfig;

		ahc_t = AHC_AIC7895;
		ahc_fe = AHC_AIC7895_FE;
		devconfig = pci_read_config(dev, DEVCONFIG, /*bytes*/4);
		devconfig &= ~SCBSIZE32;
		pci_write_config(dev, DEVCONFIG, devconfig, /*bytes*/4);
		break;
	}
	case PCI_DEVICE_ID_ADAPTEC_AIC7855:
	case PCI_DEVICE_ID_ADAPTEC_AIC7850:
		ahc_t = AHC_AIC7850;
		ahc_fe = AHC_AIC7850_FE;
		break;
	case PCI_DEVICE_ID_ADAPTEC_AIC7810:
	case PCI_DEVICE_ID_ADAPTEC_AIC7815:
		printf("RAID functionality unsupported\n");
		return (ENXIO);
	default:
		break;
	}

	regs = NULL;
	regs_type = 0;
	regs_id = 0;
#ifdef AHC_ALLOW_MEMIO
	if ((command & PCIM_CMD_MEMEN) != 0) {
		regs_type = SYS_RES_MEMORY;
		regs_id = AHC_PCI_MEMADDR;
		regs = bus_alloc_resource(dev, regs_type,
					  &regs_id, 0, ~0, 1, RF_ACTIVE);
	}
#endif

	if (regs == NULL && (command & PCI_COMMAND_IO_ENABLE) != 0) {
		regs_type = SYS_RES_IOPORT;
		regs_id = AHC_PCI_IOADDR;
		regs = bus_alloc_resource(dev, regs_type,
					  &regs_id, 0, ~0, 1, RF_ACTIVE);
	}
 
	if (regs == NULL) {
		device_printf(dev, "can't allocate register resources\n");
		return (ENOMEM);
	}

	/* Ensure busmastering is enabled */
	command |= PCIM_CMD_BUSMASTEREN;
	pci_write_config(dev, PCIR_COMMAND, command, /*bytes*/1);

	/* Allocate a dmatag for our SCB DMA maps */
	/* XXX Should be a child of the PCI bus dma tag */
	error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/0,
				   /*boundary*/0,
				   /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
				   /*highaddr*/BUS_SPACE_MAXADDR,
				   /*filter*/NULL, /*filterarg*/NULL,
				   /*maxsize*/MAXBSIZE, /*nsegments*/AHC_NSEG,
				   /*maxsegsz*/AHC_MAXTRANSFER_SIZE,
				   /*flags*/BUS_DMA_ALLOCNOW, &parent_dmat);

	if (error != 0) {
		printf("ahc_pci_attach: Could not allocate DMA tag "
		       "- error %d\n", error);
		return (ENOMEM);
	}

	/* On all PCI adapters, we allow SCB paging */
	ahc_f |= AHC_PAGESCBS;
	if ((ahc = ahc_alloc(dev, regs, regs_type, regs_id, parent_dmat,
			     ahc_t|AHC_PCI, ahc_fe, ahc_f,
			     shared_scb_data)) == NULL)
		return (ENOMEM);

	ahc->channel = channel;

	/* Store our PCI bus information for use in our PCI error handler */
	ahc->device = dev;
	
	/* Remeber how the card was setup in case there is no SEEPROM */
	ahc_outb(ahc, HCNTRL, ahc->pause);
	if ((ahc->features & AHC_ULTRA2) != 0)
		our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
	else
		our_id = ahc_inb(ahc, SCSIID) & OID;
	sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN;
	scsiseq = ahc_inb(ahc, SCSISEQ);

	if (ahc_reset(ahc) != 0) {
		/* Failed */
		ahc_free(ahc);
		return (ENXIO);
	}

	/*
	 * Take a look to see if we have external SRAM.
	 * We currently do not attempt to use SRAM that is
	 * shared among multiple controllers.
	 */
	if ((ahc->features & AHC_ULTRA2) != 0) {
		u_int dscommand0;

		dscommand0 = ahc_inb(ahc, DSCOMMAND0);
		if ((dscommand0 & RAMPS) != 0) {
			u_int32_t devconfig;

			devconfig = pci_read_config(dev, DEVCONFIG, /*bytes*/4);
			if ((devconfig & MPORTMODE) != 0) {
				/* Single user mode */

				/*
				 * XXX Assume 9bit SRAM and enable
				 * parity checking
				 */
				devconfig |= EXTSCBPEN;
				pci_write_config(dev, DEVCONFIG,
						 devconfig, /*bytes*/4);

				/*
				 * Set the bank select apropriately.
				 */
				if (ahc->channel == 'B')
					ahc_outb(ahc, SCBBADDR, 1);
				else
					ahc_outb(ahc, SCBBADDR, 0);
				
				/* Select external SCB SRAM */
				dscommand0 &= ~INTSCBRAMSEL;
				ahc_outb(ahc, DSCOMMAND0, dscommand0);

				if (ahc_probe_scbs(ahc) == 0) {
					/* External ram isn't really there */
					dscommand0 |= INTSCBRAMSEL;
					ahc_outb(ahc, DSCOMMAND0, dscommand0);
				} else if (bootverbose)
					printf("%s: External SRAM bank%d\n",
					       ahc_name(ahc),
					       ahc->channel == 'B' ? 1 : 0);
			}

		}
	} else if ((ahc->chip & AHC_CHIPID_MASK) >= AHC_AIC7870) {
		u_int32_t devconfig;

		devconfig = pci_read_config(dev, DEVCONFIG, /*bytes*/4);
		if ((devconfig & RAMPSM) != 0
		 && (devconfig & MPORTMODE) != 0) {

			/* XXX Assume 9bit SRAM and enable parity checking */
			devconfig |= EXTSCBPEN;

			/* XXX Assume fast SRAM */
			devconfig &= ~EXTSCBTIME;

			/*
			 * Set the bank select apropriately.
			 */
			if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
				if (ahc->channel == 'B')
					ahc_outb(ahc, SCBBADDR, 1);
				else
					ahc_outb(ahc, SCBBADDR, 0);
			}

			/* Select external SRAM */
			devconfig &= ~SCBRAMSEL;
			pci_write_config(dev, DEVCONFIG, devconfig, /*bytes*/4);

			if (ahc_probe_scbs(ahc) == 0) {
				/* External ram isn't really there */
				devconfig |= SCBRAMSEL;
				pci_write_config(dev, DEVCONFIG,
						 devconfig, /*bytes*/4);
			} else if (bootverbose)
				printf("%s: External SRAM bank%d\n",
				       ahc_name(ahc),
				       ahc->channel == 'B' ? 1 : 0);
		}
	}

	zero = 0;
	ahc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &zero,
				      0, ~0, 1, RF_ACTIVE | RF_SHAREABLE);
	if (ahc->irq == NULL) {
		ahc_free(ahc);
		return (ENOMEM);
	}

	ahc->irq_res_type = SYS_RES_IRQ;

	/*
	 * Do aic7880/aic7870/aic7860/aic7850 specific initialization
	 */
	{
		u_int8_t sblkctl;
		char	 *id_string;

		switch(ahc_t) {
		case AHC_AIC7896:
		{
			u_int dscommand0;

			/*
			 * DPARCKEN doesn't work correctly on
			 * some MBs so don't use it.
			 */
			id_string = "aic7896/97 ";
			dscommand0 = ahc_inb(ahc, DSCOMMAND0);
			dscommand0 &= ~(USCBSIZE32|DPARCKEN);
			dscommand0 |= CACHETHEN|MPARCKEN;
			ahc_outb(ahc, DSCOMMAND0, dscommand0);
			break;
		}
		case AHC_AIC7890:
		{
			u_int dscommand0;

			/*
			 * DPARCKEN doesn't work correctly on
			 * some MBs so don't use it.
			 */
			id_string = "aic7890/91 ";
			dscommand0 = ahc_inb(ahc, DSCOMMAND0);
			dscommand0 &= ~(USCBSIZE32|DPARCKEN);
			dscommand0 |= CACHETHEN|MPARCKEN;
			ahc_outb(ahc, DSCOMMAND0, dscommand0);
			break;
		}
		case AHC_AIC7895:
			id_string = "aic7895 ";
			break;
		case AHC_AIC7880:
			id_string = "aic7880 ";
			break;
		case AHC_AIC7870:
			id_string = "aic7870 ";
			break;
		case AHC_AIC7860:
			id_string = "aic7860 ";
			break;
		case AHC_AIC7850:
			id_string = "aic7850 ";
			break;
		default:
			printf("ahc: Unknown controller type.  Ignoring.\n");
			ahc_free(ahc);
			return (ENXIO);
		}

		/* See if we have an SEEPROM and perform auto-term */
		check_extport(ahc, &sxfrctl1);

		/*
		 * Take the LED out of diagnostic mode
		 */
		sblkctl = ahc_inb(ahc, SBLKCTL);
		ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));

		/*
		 * I don't know where this is set in the SEEPROM or by the
		 * BIOS, so we default to 100% on Ultra or slower controllers
		 * and 75% on ULTRA2 controllers.
		 */
		if ((ahc->features & AHC_ULTRA2) != 0) {
			ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75);
		} else {
			ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
		}

		if (ahc->flags & AHC_USEDEFAULTS) {
			/*
			 * PCI Adapter default setup
			 * Should only be used if the adapter does not have
			 * an SEEPROM.
			 */
			/* See if someone else set us up already */
			if (scsiseq != 0) {
				printf("%s: Using left over BIOS settings\n",
					ahc_name(ahc));
				ahc->flags &= ~AHC_USEDEFAULTS;
			} else {
				/*
				 * Assume only one connector and always turn
				 * on termination.
				 */
 				our_id = 0x07;
				sxfrctl1 = STPWEN;
			}
			ahc_outb(ahc, SCSICONF,
				 (our_id & 0x07)|ENSPCHK|RESET_SCSI);

			ahc->our_id = our_id;
		}

		printf("%s: %s", ahc_name(ahc), id_string);
	}

	/*
	 * Record our termination setting for the
	 * generic initialization routine.
	 */
	if ((sxfrctl1 & STPWEN) != 0)
		ahc->flags |= AHC_TERM_ENB_A;

	if (ahc_init(ahc)) {
		ahc_free(ahc);
		return (ENOMEM);
	}

	/* XXX Crude hack - fix sometime */
	if (ahc->flags & AHC_SHARED_SRAM) {
		/* Only set this once we've successfully probed */
		if (shared_scb_data == NULL)
			first_398X = ahc;
	}

	ahc_attach(ahc);

	return (0);
}

/*
 * Check the external port logic for a serial eeprom
 * and termination/cable detection contrls.
 */
static void
check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
{
	struct	  seeprom_descriptor sd;
	struct	  seeprom_config sc;
	u_int8_t  scsi_conf;
	int	  have_seeprom;

	sd.sd_tag = ahc->tag;
	sd.sd_bsh = ahc->bsh;
	sd.sd_control_offset = SEECTL;		
	sd.sd_status_offset = SEECTL;		
	sd.sd_dataout_offset = SEECTL;		

	/*
	 * For some multi-channel devices, the c46 is simply too
	 * small to work.  For the other controller types, we can
	 * get our information from either SEEPROM type.  Set the
	 * type to start our probe with accordingly.
	 */
	if (ahc->flags & AHC_LARGE_SEEPROM)
		sd.sd_chip = C56_66;
	else
		sd.sd_chip = C46;

	sd.sd_MS = SEEMS;
	sd.sd_RDY = SEERDY;
	sd.sd_CS = SEECS;
	sd.sd_CK = SEECK;
	sd.sd_DO = SEEDO;
	sd.sd_DI = SEEDI;

	have_seeprom = acquire_seeprom(ahc, &sd);

	if (have_seeprom) {

		if (bootverbose) 
			printf("%s: Reading SEEPROM...", ahc_name(ahc));

		for (;;) {
			bus_size_t start_addr;

			start_addr = 32 * (ahc->channel - 'A');

			have_seeprom = read_seeprom(&sd, (u_int16_t *)&sc,
						    start_addr, sizeof(sc)/2);

			if (have_seeprom) {
				/* Check checksum */
				int i;
				int maxaddr;
				u_int16_t *scarray;
				u_int16_t checksum;

				maxaddr = (sizeof(sc)/2) - 1;
				checksum = 0;
				scarray = (u_int16_t *)&sc;

				for (i = 0; i < maxaddr; i++)
					checksum = checksum + scarray[i];
				if (checksum == 0 || checksum != sc.checksum) {
					if (bootverbose && sd.sd_chip == C56_66)
						printf ("checksum error\n");
					have_seeprom = 0;
				} else {
					if (bootverbose)
						printf("done.\n");
					break;
				}
			}

			if (sd.sd_chip == C56_66)
				break;
			sd.sd_chip = C56_66;
		}
	}

	if (!have_seeprom) {
		if (bootverbose)
			printf("%s: No SEEPROM available.\n", ahc_name(ahc));
		ahc->flags |= AHC_USEDEFAULTS;
	} else {
		/*
		 * Put the data we've collected down into SRAM
		 * where ahc_init will find it.
		 */
		int i;
		int max_targ = sc.max_targets & CFMAXTARG;
		u_int16_t discenable;
		u_int16_t ultraenb;

		discenable = 0;
		ultraenb = 0;
		if ((sc.adapter_control & CFULTRAEN) != 0) {
			/*
			 * Determine if this adapter has a "newstyle"
			 * SEEPROM format.
			 */
			for (i = 0; i < max_targ; i++) {
				if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0){
					ahc->flags |= AHC_NEWEEPROM_FMT;
					break;
				}
			}
		}

		for (i = 0; i < max_targ; i++) {
			u_int     scsirate;
			u_int16_t target_mask;

			target_mask = 0x01 << i;
			if (sc.device_flags[i] & CFDISC)
				discenable |= target_mask;
			if ((ahc->flags & AHC_NEWEEPROM_FMT) != 0) {
				if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0)
					ultraenb |= target_mask;
			} else if ((sc.adapter_control & CFULTRAEN) != 0) {
				ultraenb |= target_mask;
			}
			if ((sc.device_flags[i] & CFXFER) == 0x04
			 && (ultraenb & target_mask) != 0) {
				/* Treat 10MHz as a non-ultra speed */
				sc.device_flags[i] &= ~CFXFER;
			 	ultraenb &= ~target_mask;
			}
			if ((ahc->features & AHC_ULTRA2) != 0) {
				u_int offset;

				if (sc.device_flags[i] & CFSYNCH)
					offset = MAX_OFFSET_ULTRA2;
				else 
					offset = 0;
				ahc_outb(ahc, TARG_OFFSET + i, offset);

				scsirate = (sc.device_flags[i] & CFXFER)
					 | ((ultraenb & target_mask)
					    ? 0x18 : 0x10);
				if (sc.device_flags[i] & CFWIDEB)
					scsirate |= WIDEXFER;
			} else {
				scsirate = (sc.device_flags[i] & CFXFER) << 4;
				if (sc.device_flags[i] & CFSYNCH)
					scsirate |= SOFS;
				if (sc.device_flags[i] & CFWIDEB)
					scsirate |= WIDEXFER;
			}
			ahc_outb(ahc, TARG_SCSIRATE + i, scsirate);
		}
		ahc->our_id = sc.brtime_id & CFSCSIID;

		scsi_conf = (ahc->our_id & 0x7);
		if (sc.adapter_control & CFSPARITY)
			scsi_conf |= ENSPCHK;
		if (sc.adapter_control & CFRESETB)
			scsi_conf |= RESET_SCSI;

		if (sc.bios_control & CFEXTEND)
			ahc->flags |= AHC_EXTENDED_TRANS_A;
		if (ahc->features & AHC_ULTRA
		 && (ahc->flags & AHC_NEWEEPROM_FMT) == 0) {
			/* Should we enable Ultra mode? */
			if (!(sc.adapter_control & CFULTRAEN))
				/* Treat us as a non-ultra card */
				ultraenb = 0;
		}
		/* Set SCSICONF info */
		ahc_outb(ahc, SCSICONF, scsi_conf);
		ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff));
		ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff));
		ahc_outb(ahc, ULTRA_ENB, ultraenb & 0xff);
		ahc_outb(ahc, ULTRA_ENB + 1, (ultraenb >> 8) & 0xff);
	}

	if ((ahc->features & AHC_SPIOCAP) != 0) {
		if ((ahc_inb(ahc, SPIOCAP) & SSPIOCPS) != 0) {
			configure_termination(ahc, &sc, &sd, sxfrctl1);
		}
	} else if (have_seeprom) {
		configure_termination(ahc, &sc, &sd, sxfrctl1);
	}

	release_seeprom(&sd);
}

static void
configure_termination(struct ahc_softc *ahc,
		      struct seeprom_config *sc,
		      struct seeprom_descriptor *sd,
		      u_int *sxfrctl1)
{
	int max_targ = sc->max_targets & CFMAXTARG;
	u_int8_t brddat;
	
	brddat = 0;

	/*
	 * Update the settings in sxfrctl1 to match the
	 *termination settings 
	 */
	*sxfrctl1 = 0;
	
	/*
	 * SEECS must be on for the GALS to latch
	 * the data properly.  Be sure to leave MS
	 * on or we will release the seeprom.
	 */
	SEEPROM_OUTB(sd, sd->sd_MS | sd->sd_CS);
	if ((sc->adapter_control & CFAUTOTERM) != 0
	 || (ahc->features & AHC_ULTRA2) != 0) {
		int internal50_present;
		int internal68_present;
		int externalcable_present;
		int eeprom_present;
		int enableSEC_low;
		int enableSEC_high;
		int enablePRI_low;
		int enablePRI_high;

		enableSEC_low = 0;
		enableSEC_high = 0;
		enablePRI_low = 0;
		enablePRI_high = 0;
		if (ahc->features & AHC_ULTRA2) {
			ahc_ultra2_term_detect(ahc, &enableSEC_low,
					       &enableSEC_high,
					       &enablePRI_low,
					       &enablePRI_high,
					       &eeprom_present);
			if ((sc->adapter_control & CFSEAUTOTERM) == 0) {
				enableSEC_low = (sc->adapter_control & CFSTERM);
				enableSEC_high =
				    (sc->adapter_control & CFWSTERM);
			}
			if ((sc->adapter_control & CFAUTOTERM) == 0) {
				enablePRI_low = enablePRI_high =
				    (sc->adapter_control & CFLVDSTERM);
			}
			/* Make the table calculations below happy */
			internal50_present = 0;
			internal68_present = 1;
			externalcable_present = 1;
		} else if ((ahc->features & AHC_SPIOCAP) != 0) {
			aic785X_cable_detect(ahc, &internal50_present,
					     &externalcable_present,
					     &eeprom_present);
		} else {
			aic787X_cable_detect(ahc, &internal50_present,
					     &internal68_present,
					     &externalcable_present,
					     &eeprom_present);
		}

		if (max_targ <= 8) {
			internal68_present = 0;
		}

		if (bootverbose) {
			if ((ahc->features & AHC_ULTRA2) == 0) {
				printf("%s: internal 50 cable %s present, "
				       "internal 68 cable %s present\n",
				       ahc_name(ahc),
				       internal50_present ? "is":"not",
				       internal68_present ? "is":"not");

				printf("%s: external cable %s present\n",
				       ahc_name(ahc),
				       externalcable_present ? "is":"not");
			}
			printf("%s: BIOS eeprom %s present\n",
			       ahc_name(ahc), eeprom_present ? "is" : "not");

		}

		/*
		 * Now set the termination based on what
		 * we found.
		 * Flash Enable = BRDDAT7
		 * Secondary High Term Enable = BRDDAT6
		 * Secondary Low Term Enable = BRDDAT5 (7890)
		 * Primary High Term Enable = BRDDAT4 (7890)
		 */
		if ((ahc->features & AHC_ULTRA2) == 0
		    && (internal50_present != 0)
		    && (internal68_present != 0)
		    && (externalcable_present != 0)) {
			printf("%s: Illegal cable configuration!!. "
			       "Only two connectors on the "
			       "adapter may be used at a "
			       "time!\n", ahc_name(ahc));
		}

		if ((max_targ > 8)
		 && ((externalcable_present == 0)
		  || (internal68_present == 0)
		  || (enableSEC_high != 0))) {
			brddat |= BRDDAT6;
			if (bootverbose)
				printf("%s: %sHigh byte termination Enabled\n",
				       ahc_name(ahc),
				       enableSEC_high ? "Secondary " : "");
		}

		if (((internal50_present ? 1 : 0)
		   + (internal68_present ? 1 : 0)
		   + (externalcable_present ? 1 : 0)) <= 1
		 || (enableSEC_low != 0)) {
			if ((ahc->features & AHC_ULTRA2) != 0)
				brddat |= BRDDAT5;
			else
				*sxfrctl1 |= STPWEN;
			if (bootverbose)
				printf("%s: %sLow byte termination Enabled\n",
				       ahc_name(ahc),
				       enableSEC_low ? "Secondary " : "");
		}

		if (enablePRI_low != 0) {
			*sxfrctl1 |= STPWEN;
			if (bootverbose)
				printf("%s: Primary Low Byte termination "
				       "Enabled\n", ahc_name(ahc));
		}

		if (enablePRI_high != 0) {
			brddat |= BRDDAT4;
			if (bootverbose)
				printf("%s: Primary High Byte "
				       "termination Enabled\n",
				       ahc_name(ahc));
		}
		
		write_brdctl(ahc, brddat);

	} else {
		if (sc->adapter_control & CFSTERM) {
			if ((ahc->features & AHC_ULTRA2) != 0)
				brddat |= BRDDAT5;
			else
				*sxfrctl1 |= STPWEN;

			if (bootverbose)
				printf("%s: %sLow byte termination Enabled\n",
				       ahc_name(ahc),
				       (ahc->features & AHC_ULTRA2) ? "Primary "
								    : "");
		}

		if (sc->adapter_control & CFWSTERM) {
			brddat |= BRDDAT6;
			if (bootverbose)
				printf("%s: %sHigh byte termination Enabled\n",
				       ahc_name(ahc),
				       (ahc->features & AHC_ULTRA2)
				     ? "Secondary " : "");
		}

		write_brdctl(ahc, brddat);
	}
	SEEPROM_OUTB(sd, sd->sd_MS); /* Clear CS */
}

static void
ahc_ultra2_term_detect(struct ahc_softc *ahc, int *enableSEC_low,
		      int *enableSEC_high, int *enablePRI_low,
		      int *enablePRI_high, int *eeprom_present)
{
	u_int8_t brdctl;

	/*
	 * BRDDAT7 = Eeprom
	 * BRDDAT6 = Enable Secondary High Byte termination
	 * BRDDAT5 = Enable Secondary Low Byte termination
	 * BRDDAT4 = Enable Primary low byte termination
	 * BRDDAT3 = Enable Primary high byte termination
	 */
	brdctl = read_brdctl(ahc);

	*eeprom_present = brdctl & BRDDAT7;
	*enableSEC_high = (brdctl & BRDDAT6);
	*enableSEC_low = (brdctl & BRDDAT5);
	*enablePRI_low = (brdctl & BRDDAT4);
	*enablePRI_high = (brdctl & BRDDAT3);
}

static void
aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
		     int *internal68_present, int *externalcable_present,
		     int *eeprom_present)
{
	u_int8_t brdctl;

	/*
	 * First read the status of our cables.
	 * Set the rom bank to 0 since the
	 * bank setting serves as a multiplexor
	 * for the cable detection logic.
	 * BRDDAT5 controls the bank switch.
	 */
	write_brdctl(ahc, 0);

	/*
	 * Now read the state of the internal
	 * connectors.  BRDDAT6 is INT50 and
	 * BRDDAT7 is INT68.
	 */
	brdctl = read_brdctl(ahc);
	*internal50_present = !(brdctl & BRDDAT6);
	*internal68_present = !(brdctl & BRDDAT7);

	/*
	 * Set the rom bank to 1 and determine
	 * the other signals.
	 */
	write_brdctl(ahc, BRDDAT5);

	/*
	 * Now read the state of the external
	 * connectors.  BRDDAT6 is EXT68 and
	 * BRDDAT7 is EPROMPS.
	 */
	brdctl = read_brdctl(ahc);
	*externalcable_present = !(brdctl & BRDDAT6);
	*eeprom_present = brdctl & BRDDAT7;
}

static void
aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
		     int *externalcable_present, int *eeprom_present)
{
	u_int8_t brdctl;

	ahc_outb(ahc, BRDCTL, BRDRW|BRDCS);
	ahc_outb(ahc, BRDCTL, 0);
	brdctl = ahc_inb(ahc, BRDCTL);
	*internal50_present = !(brdctl & BRDDAT5);
	*externalcable_present = !(brdctl & BRDDAT6);

	*eeprom_present = (ahc_inb(ahc, SPIOCAP) & EEPROM) != 0;
}
	
static int
acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd)
{
	int wait;

	if ((ahc->features & AHC_SPIOCAP) != 0
	 && (ahc_inb(ahc, SPIOCAP) & SEEPROM) == 0)
			return (0);

	/*
	 * Request access of the memory port.  When access is
	 * granted, SEERDY will go high.  We use a 1 second
	 * timeout which should be near 1 second more than
	 * is needed.  Reason: after the chip reset, there
	 * should be no contention.
	 */
	SEEPROM_OUTB(sd, sd->sd_MS);
	wait = 1000;  /* 1 second timeout in msec */
	while (--wait && ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0)) {
		DELAY(1000);  /* delay 1 msec */
	}
	if ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0) {
		SEEPROM_OUTB(sd, 0); 
		return (0);
	}
	return(1);
}

static void
release_seeprom(sd)
	struct seeprom_descriptor *sd;
{
	/* Release access to the memory port and the serial EEPROM. */
	SEEPROM_OUTB(sd, 0);
}

static void
write_brdctl(ahc, value)
	struct 	ahc_softc *ahc;
	u_int8_t value;
{
	u_int8_t brdctl;

	if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
		brdctl = BRDSTB;
	 	if (ahc->channel == 'B')
			brdctl |= BRDCS;
	} else if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890) {
		brdctl = 0;
	} else {
		brdctl = BRDSTB|BRDCS;
	}
	ahc_outb(ahc, BRDCTL, brdctl);
	brdctl |= value;
	ahc_outb(ahc, BRDCTL, brdctl);
	if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890)
		brdctl |= BRDSTB_ULTRA2;
	else
		brdctl &= ~BRDSTB;
	ahc_outb(ahc, BRDCTL, brdctl);
	if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890)
		brdctl = 0;
	else
		brdctl &= ~BRDCS;
	ahc_outb(ahc, BRDCTL, brdctl);
}

static u_int8_t
read_brdctl(ahc)
	struct 	ahc_softc *ahc;
{
	u_int8_t brdctl;
	u_int8_t value;

	if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
		brdctl = BRDRW;
	 	if (ahc->channel == 'B')
			brdctl |= BRDCS;
	} else if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890) {
		brdctl = BRDRW_ULTRA2;
	} else {
		brdctl = BRDRW|BRDCS;
	}
	ahc_outb(ahc, BRDCTL, brdctl);
	value = ahc_inb(ahc, BRDCTL);
	ahc_outb(ahc, BRDCTL, 0);
	return (value);
}

#define	DPE	0x80
#define SSE	0x40
#define	RMA	0x20
#define	RTA	0x10
#define STA	0x08
#define DPR	0x01

void
ahc_pci_intr(struct ahc_softc *ahc)
{
	u_int8_t status1;

	status1 = pci_read_config(ahc->device, PCIR_STATUS + 1, /*bytes*/1);

	if (status1 & DPE) {
		printf("%s: Data Parity Error Detected during address "
		       "or write data phase\n", ahc_name(ahc));
	}
	if (status1 & SSE) {
		printf("%s: Signal System Error Detected\n", ahc_name(ahc));
	}
	if (status1 & RMA) {
		printf("%s: Received a Master Abort\n", ahc_name(ahc));
	}
	if (status1 & RTA) {
		printf("%s: Received a Target Abort\n", ahc_name(ahc));
	}
	if (status1 & STA) {
		printf("%s: Signaled a Target Abort\n", ahc_name(ahc));
	}
	if (status1 & DPR) {
		printf("%s: Data Parity Error has been reported via PERR#\n",
		       ahc_name(ahc));
	}
	if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) {
		printf("%s: Latched PCIERR interrupt with "
		       "no status bits set\n", ahc_name(ahc)); 
	}
	pci_write_config(ahc->device, PCIR_STATUS + 1, status1, /*bytes*/1);

	if (status1 & (DPR|RMA|RTA)) {
		ahc_outb(ahc, CLRINT, CLRPARERR);
	}
}

#endif /* NPCI > 0 */
OpenPOWER on IntegriCloud