1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
|
/*
* i82365.h - Definitions for Intel 82365 PCIC
* PCMCIA Card Interface Controller
*
* originally by Barry Jaspan; hacked over by Keith Moore
* hacked to unrecognisability by Andrew McRae (andrew@mega.com.au)
*
* Updated 3/3/95 to include Cirrus Logic stuff.
*-------------------------------------------------------------------------
*
* Copyright (c) 1995 Andrew McRae. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#define PCIC_I82365 0 /* Intel chip */
#define PCIC_IBM 1 /* IBM clone */
#define PCIC_VLSI 2 /* VLSI chip */
#define PCIC_PD672X 3 /* Cirrus logic 627x */
#define PCIC_PD6710 4 /* Cirrus logic 6710 */
#define PCIC_CL6729 5 /* Cirrus logic 6729 */
#define PCIC_VG365 6 /* Vadem 365 */
#define PCIC_VG465 7 /* Vadem 465 */
#define PCIC_VG468 8 /* Vadem 468 */
#define PCIC_VG469 9 /* Vadem 469 */
#define PCIC_RF5C396 10 /* Ricoh RF5C396 */
#define PCIC_IBM_KING 11 /* IBM KING PCMCIA Controller */
#define PCIC_PC98 12 /* NEC PC98 PCMCIA Controller */
#define PCIC_TI1130 13 /* TI PCI1130 CardBus */
/*
* Address of the controllers. Each controller can manage
* two PCMCIA slots. Up to 8 slots are supported in total.
* The PCIC controller is accessed via an index port and a
* data port. The index port has the 8 bit address of the
* register accessed via the data port. How I long for
* real memory mapped I/O!
* The top two bits of the index address are used to
* identify the port number, and the lower 6 bits
* select one of the 64 possible data registers.
*/
#define PCIC_INDEX_0 0x3E0 /* index reg, chips 0 and 1 */
#define PCIC_DATA_0 (PCIC_INDEX_0 + 1) /* data reg, chips 0 and 1 */
#define PCIC_INDEX_1 (PCIC_INDEX_0 + 2) /* index reg, chips 2 and 3 */
#define PCIC_DATA_1 (PCIC_INDEX_1 + 1) /* data reg, chips 2 and 3 */
/*
* Register index addresses.
*/
#define PCIC_ID_REV 0x00 /* Identification and Revision */
#define PCIC_STATUS 0x01 /* Interface Status */
#define PCIC_POWER 0x02 /* Power and RESETDRV control */
#define PCIC_INT_GEN 0x03 /* Interrupt and General Control */
#define PCIC_STAT_CHG 0x04 /* Card Status Change */
#define PCIC_STAT_INT 0x05 /* Card Status Change Interrupt Config */
#define PCIC_ADDRWINE 0x06 /* Address Window Enable */
#define PCIC_IOCTL 0x07 /* I/O Control */
#define PCIC_IO0 0x08 /* I/O Address 0 */
#define PCIC_IO1 0x0c /* I/O Address 1 */
#define PCIC_MEMBASE 0x10 /* Base of memory window registers */
#define PCIC_CDGC 0x16 /* Card Detect and General Control */
#define PCIC_MISC1 0x16 /* PD672x: Misc control register 1 per slot */
#define PCIC_GLO_CTRL 0x1e /* Global Control Register */
#define PCIC_MISC2 0x1e /* PD672x: Misc control register 2 per chip */
#define PCIC_TIME_SETUP0 0x3a
#define PCIC_TIME_CMD0 0x3b
#define PCIC_TIME_RECOV0 0x3c
#define PCIC_TIME_SETUP1 0x3d
#define PCIC_TIME_CMD1 0x3e
#define PCIC_TIME_RECOV1 0x3f
#define PCIC_SLOT_SIZE 0x40 /* Size of register set for one slot */
/* Now register bits, ordered by reg # */
/* For Identification and Revision (PCIC_ID_REV) */
#define PCIC_INTEL0 0x82 /* Intel 82365SL Rev. 0; Both Memory and I/O */
#define PCIC_INTEL1 0x83 /* Intel 82365SL Rev. 1; Both Memory and I/O */
#define PCIC_IBM1 0x88 /* IBM PCIC clone; Both Memory and I/O */
#define PCIC_IBM2 0x89 /* IBM PCIC clone; Both Memory and I/O */
#define PCIC_IBM3 0x8a /* IBM KING PCIC clone; Both Memory and I/O */
/* For Interface Status register (PCIC_STATUS) */
#define PCIC_VPPV 0x80 /* Vpp_valid */
#define PCIC_POW 0x40 /* PC Card power active */
#define PCIC_READY 0x20 /* Ready/~Busy */
#define PCIC_MWP 0x10 /* Memory Write Protect */
#define PCIC_CD 0x0C /* Both card detect bits */
#define PCIC_BVD 0x03 /* Both Battery Voltage Detect bits */
/* For the Power and RESETDRV register (PCIC_POWER) */
#define PCIC_OUTENA 0x80 /* Output Enable */
#define PCIC_DISRST 0x40 /* Disable RESETDRV */
#define PCIC_APSENA 0x20 /* Auto Pwer Switch Enable */
#define PCIC_PCPWRE 0x10 /* PC Card Power Enable */
#define PCIC_VCC 0x18 /* Vcc control bits */
#define PCIC_VCC_5V 0x10 /* 5 volts */
#define PCIC_VCC_3V 0x18 /* 3 volts */
#define PCIC_VCC_5V_KING 0x14 /* 5 volts for KING PCIC */
#define PCIC_VPP 0x0C /* Vpp control bits */
#define PCIC_VPP_5V 0x01 /* 5 volts */
#define PCIC_VPP_12V 0x02 /* 12 volts */
/* For the Interrupt and General Control register (PCIC_INT_GEN) */
#define PCIC_CARDTYPE 0x20 /* Card Type 0 = memory, 1 = I/O */
#define PCIC_IOCARD 0x20
#define PCIC_MEMCARD 0x00
#define PCIC_CARDRESET 0x40 /* Card reset 0 = Reset, 1 = Normal */
#define PCIC_INTR_ENA 0x10 /* Interrupt enable */
/* For the Card Status Change register (PCIC_STAT_CHG) */
#define PCIC_CDTCH 0x08 /* Card Detect Change */
#define PCIC_RDYCH 0x04 /* Ready Change */
#define PCIC_BATWRN 0x02 /* Battery Warning */
#define PCIC_BATDED 0x01 /* Battery Dead */
/*
* For the Address Window Enable Register (PCIC_ADDRWINE)
* The lower 6 bits contain enable bits for the memory
* windows (LSB = memory window 0).
*/
#define PCIC_MEMCS16 0x20 /* ~MEMCS16 Decode A23-A12 */
#define PCIC_IO0_EN 0x40 /* I/O Window 0 Enable */
#define PCIC_IO1_EN 0x80 /* I/O Window 1 Enable */
/*
* For the I/O Control Register (PCIC_IOCTL)
* The lower nybble is the flags for I/O window 0
* The upper nybble is the flags for I/O window 1
*/
#define PCIC_IO_16BIT 0x01 /* I/O to this segment is 16 bit */
#define PCIC_IO_CS16 0x02 /* I/O cs16 source is the card */
#define PCIC_IO_0WS 0x04 /* zero wait states added on 8 bit cycles */
#define PCIC_IO_WS 0x08 /* Wait states added for 16 bit cycles */
/*
* The memory window registers contain the start and end
* physical host address that the PCIC maps to the card,
* and an offset calculated from the card memory address.
* All values are shifted down 12 bits, so allocation is
* done in 4Kb blocks. Only 12 bits of each value is
* stored, limiting the range to the ISA address size of
* 24 bits. The upper 4 bits of the most significant byte
* within the values are used for various flags.
*
* The layout is:
*
* base+0 : lower 8 bits of system memory start address
* base+1 : upper 4 bits of system memory start address + flags
* base+2 : lower 8 bits of system memory end address
* base+3 : upper 4 bits of system memory end address + flags
* base+4 : lower 8 bits of offset to card address
* base+5 : upper 4 bits of offset to card address + flags
*
* The following two bytes are reserved for other use.
*/
#define PCIC_MEMSIZE 8
/*
* Flags for system memory start address upper byte
*/
#define PCIC_ZEROWS 0x40 /* Zero wait states */
#define PCIC_DATA16 0x80 /* Data width is 16 bits */
/*
* Flags for system memory end address upper byte
*/
#define PCIC_MW0 0x40 /* Wait state bit 0 */
#define PCIC_MW1 0x80 /* Wait state bit 1 */
/*
* Flags for card offset upper byte
*/
#define PCIC_REG 0x40 /* Attribute/Common select (why called Reg?) */
#define PCIC_WP 0x80 /* Write-protect this window */
/* For Card Detect and General Control register (PCIC_CDGC) */
#define PCIC_16_DL_INH 0x01 /* 16-bit memory delay inhibit */
#define PCIC_CNFG_RST_EN 0x02 /* configuration reset enable */
#define PCIC_GPI_EN 0x04 /* GPI Enable */
#define PCIC_GPI_TRANS 0x08 /* GPI Transition Control */
#define PCIC_CDRES_EN 0x10 /* card detect resume enable */
#define PCIC_SW_CD_INT 0x20 /* s/w card detect interrupt */
/* For Misc. Control Register 1 */
#define PCIC_SPKR_EN 0x10 /* Cirrus PD672x: speaker enable */
/* For Global Control register (PCIC_GLO_CTRL) */
#define PCIC_PWR_DOWN 0x01 /* power down */
#define PCIC_LVL_MODE 0x02 /* level mode interrupt enable */
#define PCIC_WB_CSCINT 0x04 /* explicit write-back csc intr */
#define PCIC_IRQ0_LEVEL 0x08 /* irq 14 pulse mode enable */
#define PCIC_IRQ1_LEVEL 0x10
/* For Misc. Control Register 2 */
#define PCIC_LPDM_EN 0x02 /* Cirrus PD672x: low power dynamic mode */
/*
* Mask of allowable interrupts.
* Ints are 3,4,5,7,9,10,11,12,14,15
*/
#define PCIC_INT_MASK_ALLOWED 0xDEB8
#define PCIC_IO_WIN 2
#define PCIC_MEM_WIN 5
#define PCIC_MAX_SLOTS 8
|
