blob: 2721962ef8c0f0aaf6d0c2a978d6c0a8dfa797f1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
# $FreeBSD$
#
# Specific board setup for the D-Link DIR-825C1 router.
#
# The DIR-825C1 has the following hardware:
#
# + AR9344 CPU SoC 74k MIPS
# + ARxxx 2.4GHz 11n
# + ARXXX 5GHz 11n
# + AR8327 Gigabit switch
# + m25p80 based 16MB flash
# + 128MB RAM
# + uboot environment
#NO_UNIVERSE
# Include the default AR934x parameters
include "AR934X_BASE"
ident DIR825C1
# Override hints with board values
hints "DIR-825C1.hints"
# Force the board memory - the base DB120 has 128MB RAM
options AR71XX_REALMEM=(128*1024*1024)
# i2c GPIO bus
device gpioiic
device iicbb
device iicbus
device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# Used for the static uboot partition map
device geom_map
# uzip - to boot natively from flash
options GEOM_UNCOMPRESS
options GEOM_PART_GPT
# yes, this board has a PCI connected atheros device
device ath_pci
options AR71XX_ATH_EEPROM
device firmware # Used by the above
options ATH_EEPROM_FIRMWARE
# Boot off of the rootfs, as defined in the geom_map setup.
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
# In order to netboot, you have to build the mfsroot into the kernel
# 19443712 or 19M is the biggest rootfs via netboot this thing supports
#options MD_ROOT # md device usable as a potential root device
#options MD_ROOT_SIZE=19444
#makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
#options ROOTDEVNAME=\"ufs:md0.uncompress\"
|
