blob: c978f6d9b3251db535a524785826f9622c0dd73a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
# $FreeBSD$
# arge0 is connected to the LAN side of the switch PHY.
# arge1 is connected to the single port WAN side of the switch PHY.
hint.arge.0.phymask=0x0
hint.arge.0.media=1000
hint.arge.0.fduplex=1
# XXX grab these from uboot?
# hint.arge.0.eeprommac=0x1f01fc00
hint.arge.1.phymask=0x0
hint.arge.1.media=1000
hint.arge.1.fduplex=1
# ath0 - slot 17
hint.pcib.0.bus.0.17.0.ath_fixup_addr=0x1fff1000
hint.pcib.0.bus.0.17.0.ath_fixup_size=4096
# ath1 - slot 18
hint.pcib.0.bus.0.18.0.ath_fixup_addr=0x1fff5000
hint.pcib.0.bus.0.18.0.ath_fixup_size=4096
# .. and now, telling each ath(4) NIC where to find the firmware
# image.
hint.ath.0.eeprom_firmware="pcib.0.bus.0.17.0.eeprom_firmware"
hint.ath.1.eeprom_firmware="pcib.0.bus.0.18.0.eeprom_firmware"
# TODO: gpio LEDs
# Geom MAP
# The DIR-825 has an 8MB flash part - HOWEVER, the 64k caldata isn't
# at the end of the flash. It's ~ 6MB into the flash image.
# mtdparts=ar7100-nor0:256k(uboot),64k(Config),1024k(vmlinux),5184k(rootfs),64k(caldata)
hint.map.0.at="flash/spi0"
hint.map.0.start=0x00000000
hint.map.0.end=0x000040000
hint.map.0.name="uboot"
hint.map.0.readonly=1
# This config partition is the D-Link specific configuration area.
# I'm re-purposing it for FreeBSD.
hint.map.1.at="flash/spi0"
hint.map.1.start=0x00040000
hint.map.1.end=0x00050000
hint.map.1.name="cfg"
hint.map.1.readonly=0
hint.map.2.at="flash/spi0"
hint.map.2.start=0x0050000
hint.map.2.end=0x00150000
hint.map.2.name="kernel"
hint.map.2.readonly=1
hint.map.3.at="flash/spi0"
hint.map.3.start=0x00150000
hint.map.3.end=0x00660000
hint.map.3.name="rootfs"
hint.map.3.readonly=0
hint.map.4.at="flash/spi0"
hint.map.4.start=0x00660000
hint.map.4.end=0x00670000
hint.map.4.name="art"
hint.map.4.readonly=1
|
