path: root/sys/dev/pci/pci.c

/**************************************************************************
**
**  $Id: pci.c,v 1.16 1995/02/25 17:26:22 se Exp $
**
**  General subroutines for the PCI bus on 80*86 systems.
**  pci_configure ()
**
**  386bsd / FreeBSD
**
**-------------------------------------------------------------------------
**
** Copyright (c) 1994 Wolfgang Stanglmeier.  All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
** 1. Redistributions of source code must retain the above copyright
**    notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
**    notice, this list of conditions and the following disclaimer in the
**    documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
**    derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
***************************************************************************
*/

#define PCI_PATCHLEVEL  "pl5 95/02/27"

#include <pci.h>
#if NPCI > 0

#ifndef __FreeBSD2__
#if __FreeBSD__ >= 2
#define	__FreeBSD2__
#endif
#endif

/*========================================================
**
**	#includes  and  declarations
**
**========================================================
*/

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/errno.h>
#include <sys/kernel.h>

#include <vm/vm.h>
#include <vm/vm_param.h>

#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <pci/pcibus.h>

#include <machine/pmap.h>
#ifdef __FreeBSD2__
#include <sys/devconf.h>

struct pci_devconf {
	struct kern_devconf pdc_kdc;
	struct pci_info     pdc_pi;
};

static int
pci_externalize (struct proc *, struct kern_devconf *, void *, size_t);
 
static int
pci_internalize (struct proc *, struct kern_devconf *, void *, size_t);
#else /* __FreeBSD2__ */

/*
**	Function prototypes missing in system headers
*/

extern	pmap_t pmap_kernel(void);
static	vm_offset_t pmap_mapdev (vm_offset_t paddr, vm_size_t vsize);
#endif /* __FreeBSD2__ */


/*========================================================
**
**	Autoconfiguration of pci devices.
**
**	This is reverse to the isa configuration.
**	(1) find a pci device.
**	(2) look for a driver.
**
**========================================================
*/

/*--------------------------------------------------------
**
**	Limit for pci bus numbers.
**
**--------------------------------------------------------
*/

#ifndef PCI_MAX_BUS
#define PCI_MAX_BUS	(256)
#endif

static	u_long	pci_bus_max = 1;

/*--------------------------------------------------------
**
**	The pci devices can be mapped to any address.
**	This is a list of possible starting addresses.
**	It can be prepended by a config option.
**
**--------------------------------------------------------
*/

static	u_long	pci_stable[] = {
#ifdef PCI_PMEM_START
	(PCI_PMEM_START),
#endif
	0xf1000000,
	0x53900000,
	0xc0000000,
	0x81000000,
	0x0f000000,
};

static	vm_offset_t pci_paddr = 0;
static	vm_offset_t pci_pold  = 0;
static	vm_offset_t pci_pidx  = 0;


/*--------------------------------------------------------
**
**	The pci ports can be mapped to any address.
**	As default we start at 0x400
**
**--------------------------------------------------------
*/

#ifndef PCI_PORT_START
#define PCI_PORT_START 0xbc00
#endif

static	u_short pci_ioaddr = PCI_PORT_START;

/*--------------------------------------------------------
**
**	The pci device interrupt lines should have been
**	assigned by the bios. But if the bios failed to
**	to it, we set it.
**
**--------------------------------------------------------
*/

#ifndef PCI_IRQ
#define PCI_IRQ 0
#endif

static	u_long      pci_irq   = PCI_IRQ;

/*---------------------------------------------------------
**
**	pci_configure ()
**
**	Probe all devices on pci bus and attach them.
**
**	May be called more than once.
**	Any device is attached only once.
**	(Attached devices are remembered in pci_seen.)
**	Has to take care of mirrored devices, which are
**	entailed by incomplete decoding of pci address lines.
**
**---------------------------------------------------------
*/

static void not_supported (pcici_t tag, u_long type);

static unsigned long pci_seen[PCI_MAX_BUS];

static int pci_conf_count;
static int pci_info_done;

void pci_configure()
{
	u_char	device,max_device;
	u_short	bus;
	pcici_t	tag;
	pcidi_t type, type8, type16;
	u_long	data;
	int	unit;
	int	pci_mechanism;
	int	pciint;
	int	irq;
	char*	name=0;
	u_short	old_ioaddr=pci_ioaddr;

	int	dvi;
	struct pci_device *dvp=0;

#ifdef __FreeBSD2__
	struct pci_devconf *pdcp;
#endif

	/*
	**	first check pci bus driver available
	*/

	if (pcibus_set.ls_length <= 0)
		return;

#define pcibus (*((struct pcibus*) pcibus_set.ls_items[0]))
	/*
	**	check pci bus present
	*/

	pci_mechanism = pcibus.pb_mode ();
	if (!pci_mechanism) return;
	max_device = pci_mechanism==1 ? 32 : 16;

	/*
	**	hello world ..
	*/

	pci_pold=pci_paddr;
	for (bus=0; bus<pci_bus_max; bus++) {
#ifndef PCI_QUIET
	    printf ("Probing for devices on the %s%d bus:\n",
	    	pcibus.pb_name, bus);
	    if (!pci_info_done) {
		pci_info_done=1;
		printf ("\tconfiguration mode %d allows %d devices.\n",
			pci_mechanism, max_device);
	    };
#endif
	    for (device=0; device<max_device; device ++) {

		if (pci_seen[bus] & (1ul << device))
			continue;

		tag  = pcibus.pb_tag (bus, device, 0);
		type = pcibus.pb_read (tag, PCI_ID_REG);

		if ((!type) || (type==0xfffffffful)) continue;

		/*
		**	lookup device in ioconfiguration:
		*/

        	for (dvi=0; dvi<pcidevice_set.ls_length; dvi++) {
			dvp = (struct pci_device*) pcidevice_set.ls_items[dvi];
			if ((name=(*dvp->pd_probe)(tag, type)))
				break;
			dvp = NULL;
		};

		/*
		**	check for mirrored devices.
		*/
		if (device & 0x08) {
			pcici_t	mtag;
			mtag  = pcibus.pb_tag (bus, device & ~0x08, 0);
			type8 = pcibus.pb_read (mtag, PCI_ID_REG);
		} else type8 = 0;
		if (device & 0x10) {
			pcici_t	mtag;
			mtag  = pcibus.pb_tag (bus, device & ~0x10, 0);
			type16 = pcibus.pb_read (mtag, PCI_ID_REG);
		} else type16 = 0;
		if ((type==type8) || (type==type16)) {
#ifndef PCI_QUIET
			if (dvp==NULL) continue;
			printf ("%s? <%s> mirrored on pci%d:%d\n",
				dvp->pd_name, name, bus, device);
#endif
			continue;
		};

		if (dvp==NULL) {
#ifndef PCI_QUIET
			if (pci_conf_count)
				continue;
			printf("%s%d:%d: ", pcibus.pb_name, bus, device);
			not_supported (tag, type);
#endif
			continue;
		};

		pci_seen[bus] |= (1ul << device);
		/*
		**	Get and increment the unit.
		*/

		unit = (*dvp->pd_count)++;

		/*
		**	ignore device ?
		*/

		if (!*name) continue;

		/*
		**	Announce this device
		*/

		printf ("%s%d <%s>", dvp->pd_name, unit, name);

		/*
		**	Get the int pin number (pci interrupt number a-d)
		**	from the pci configuration space.
		*/

		data = pcibus.pb_read (tag, PCI_INTERRUPT_REG);
		pciint = PCI_INTERRUPT_PIN_EXTRACT(data);

		if (pciint) {

			printf (" int %c", 0x60+pciint);

			/*
			**	If the interrupt line register is not set,
			**	set it now from PCI_IRQ.
			*/

			if (!(PCI_INTERRUPT_LINE_EXTRACT(data))) {

				irq = pci_irq & 0x0f;
				pci_irq >>= 4;

				data = PCI_INTERRUPT_LINE_INSERT(data, irq);
				printf (" (config)");
				pcibus.pb_write (tag, PCI_INTERRUPT_REG, data);
			};

			irq = PCI_INTERRUPT_LINE_EXTRACT(data);

			/*
			**	If it's zero, the isa irq number is unknown,
			**	and we cannot bind the pci interrupt to isa.
			*/

			if (irq)
				printf (" irq %d", irq);
			else
				printf (" not bound");
		};

		/*
		**	enable memory access
		*/

		data = (pcibus.pb_read (tag, PCI_COMMAND_STATUS_REG)
			& 0xffff) | PCI_COMMAND_MEM_ENABLE;

		pcibus.pb_write (tag, (u_char) PCI_COMMAND_STATUS_REG, data);

		/*
		**	show pci slot.
		*/

		printf (" on pci%d:%d\n", bus, device);

#ifdef __FreeBSD2__

		/*
		**	Allocate a devconf structure
		*/

		pdcp = (struct pci_devconf *)
			malloc (sizeof (struct pci_devconf),M_DEVBUF,M_WAITOK);

		/*
		**	Fill in.
		**
		**	Sorry, this is not yet complete.
		**	We should, and eventually will, set the
		**	parent pointer to a pci bus devconf structure,
		**	and arrange to set the state field dynamically.
		**
		**	But I'll go to vacation today, and after all,
		**	wasn't there a new feature freeze on Oct 1.?
		*/

		pdcp -> pdc_pi.pi_bus	 = bus;
		pdcp -> pdc_pi.pi_device = device;

		pdcp -> pdc_kdc.kdc_name = dvp->pd_name;
		pdcp -> pdc_kdc.kdc_unit = unit;

		pdcp -> pdc_kdc.kdc_md.mddc_devtype = MDDT_PCI;

		pdcp -> pdc_kdc.kdc_externalize = pci_externalize;
		pdcp -> pdc_kdc.kdc_internalize = pci_internalize;

		pdcp -> pdc_kdc.kdc_datalen     = PCI_EXTERNAL_LEN;
		pdcp -> pdc_kdc.kdc_parentdata  = &pdcp->pdc_pi;
		pdcp -> pdc_kdc.kdc_state       = DC_UNKNOWN;
		pdcp -> pdc_kdc.kdc_description = name;

		/*
		**	And register this device
		*/

		dev_attach (&pdcp->pdc_kdc);

#endif /* __FreeBSD2__ */


		/*
		**	attach device
		**	may produce additional log messages,
		**	i.e. when installing subdevices.
		*/

		(*dvp->pd_attach) (tag, unit);
	    };
	};

#ifndef PCI_QUIET
	if (pci_paddr != pci_pold)
		printf ("pci uses physical addresses from 0x%lx to 0x%lx\n",
			(u_long)pci_pold, (u_long)pci_paddr);
	if (pci_ioaddr != old_ioaddr)
		printf ("pci devices use ioports from 0x%x to 0x%x\n",
			(unsigned)PCI_PORT_START, (unsigned)pci_ioaddr);
#endif
	pci_conf_count++;
}

/*-----------------------------------------------------------------
**
**	The following functions are provided for the device driver
**	to read/write the configuration space.
**
**	pci_conf_read():
**		Read a long word from the pci configuration space.
**		Requires a tag (from pcitag) and the register
**		number (should be a long word alligned one).
**
**	pci_conf_write():
**		Writes a long word to the pci configuration space.
**		Requires a tag (from pcitag), the register number
**		(should be a long word alligned one), and a value.
**
**-----------------------------------------------------------------
*/

u_long
pci_conf_read  (pcici_t tag, u_long reg)
{
	return (pcibus.pb_read (tag, reg));
}

void
pci_conf_write (pcici_t tag, u_long reg, u_long data)
{
	pcibus.pb_write (tag, reg, data);
}

/*-----------------------------------------------------------------------
**
**	Map device into port space.
**
**	PCI-Specification:  6.2.5.1: address maps
**
**-----------------------------------------------------------------------
*/

int pci_map_port (pcici_t tag, u_long reg, u_short* pa)
{
	u_long	data,oldmap;
	u_short	size, ioaddr;

	/*
	**	sanity check
	*/

	if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) {
		printf ("pci_map_port failed: bad register=0x%x\n",
	       		(unsigned)reg);
		return (0);
	};

	/*
	**	get size and type of port
	**
	**	type is in the lowest two bits.
	**	If device requires 2^n bytes, the next
	**	n-2 bits are hardwired as 0.
	*/

#ifdef PCI_REMAP
	oldmap = 0;
#else
	oldmap = pcibus.pb_read (tag, reg) & 0xfffffffc;
	if (oldmap==0xfffffffc) oldmap=0;
#endif
	pcibus.pb_write (tag, reg, 0xfffffffful);
	data = pcibus.pb_read (tag, reg);

	switch (data & 0x03) {

	case PCI_MAP_IO:
		break;

	default:	/* unknown */
		printf ("pci_map_port failed: bad port type=0x%x\n",
	       		(unsigned) data);
		return (0);
	};

	/*
	**	get the size
	*/

	size = -(data &  PCI_MAP_IO_ADDRESS_MASK);

	if (!size) return (0);

	/*
	**	align physical address to virtual size,
	**	set ioaddr,
	**	and don't forget to increment pci_ioaddr
	*/

	if (oldmap) {
		ioaddr = oldmap;
	} else {
		if ((data = pci_ioaddr % size))
			pci_ioaddr += size - data;
		ioaddr = pci_ioaddr;
		pci_ioaddr += size;
	};

#ifndef PCI_QUIET
	/*
	**	display values.
	*/

	printf ("\treg%d: ioaddr=0x%x size=0x%x\n",
		(unsigned) reg, (unsigned) ioaddr, (unsigned) size);
#endif

	/*
	**	set device address
	*/

	pcibus.pb_write (tag, reg, (u_long) ioaddr);

	/*
	**	return them to the driver
	*/

	*pa = pci_ioaddr;

	return (1);
}

/*-----------------------------------------------------------------------
**
**	Map device into virtual and physical space
**
**	PCI-Specification:  6.2.5.1: address maps
**
**-----------------------------------------------------------------------
*/

int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
	u_long data,oldmap,paddr;
	vm_size_t vsize;
	vm_offset_t vaddr;
	int i;

	/*
	**	sanity check
	*/

	if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) {
		printf ("pci_map_mem failed: bad register=0x%x\n",
	       		(unsigned)reg);
		return (0);
	};

	/*
	**	save old mapping, get size and type of memory
	**
	**	type is in the lowest four bits.
	**	If device requires 2^n bytes, the next
	**	n-4 bits are read as 0.
	*/

#ifdef PCI_REMAP
	oldmap = 0;
#else
	oldmap = pcibus.pb_read (tag, reg) & 0xfffffff0;
	if (oldmap==0xfffffff0) oldmap = 0;
#endif
	pcibus.pb_write (tag, reg, 0xfffffffful);
	data = pcibus.pb_read (tag, reg);

	switch (data & 0x0f) {

	case PCI_MAP_MEMORY_TYPE_32BIT:	/* 32 bit non cachable */
		break;

	default:	/* unknown */
		printf ("pci_map_mem failed: bad memory type=0x%x\n",
	       		(unsigned) data);
		return (0);
	};

	/*
	**	mask out the type,
	**	and round up to a page size
	*/

	vsize = round_page (-(data &  PCI_MAP_MEMORY_ADDRESS_MASK));

	if (!vsize) return (0);

	if (oldmap) {
		paddr = oldmap;
		goto domap;
	};

next_try:
	if (!pci_paddr) {
		/*
		**	Get a starting address.
		*/
		if (pci_pidx >= sizeof(pci_stable)/sizeof(u_long)) {
			printf ("pci_map_mem: out of start addresses.\n");
			return (0);
		};

		pci_paddr = pci_stable[pci_pidx++];
		pci_pold  = 0;

		if (pci_pidx>1)
			printf ("\t(retry at 0x%x)\n",
				(unsigned) pci_paddr);
	};
	/*
	**	align physical address to virtual size
	*/

	if ((data = pci_paddr % vsize))
		pci_paddr += vsize - data;

	if (!pci_pold)
		pci_pold = pci_paddr;

	/*
	**	set physical mapping address,
	**	and reserve physical address range
	*/

	paddr     = pci_paddr;
	pci_paddr += vsize;

domap:
	vaddr = (vm_offset_t) pmap_mapdev (paddr, vsize);

	if (!vaddr) return (0);

#ifndef PCI_QUIET
	/*
	**	display values.
	*/

	printf ("\treg%d: virtual=0x%lx physical=0x%lx\n",
		(unsigned) reg, (u_long)vaddr, (u_long)paddr);
#endif

	/*
	**	probe for already mapped device.
	*/

	if (!oldmap) for (i=0; i<vsize; i+=4) {
		u_long* addr = (u_long*) (vaddr+i);
		data = *addr;
		if (data != 0xffffffff) {
			printf ("\t(possible address conflict: "
				"at 0x%x read: 0x%x)\n",
				(unsigned) paddr+i, (unsigned) data);
			pci_paddr = 0;
			goto next_try;
		};
	};

	/*
	**	Set device address
	*/

	pcibus.pb_write (tag, reg, paddr);

	/*
	**	Check if correctly mapped.
	**
	**	W A R N I N G
	**
	**	This code assumes that the device will NOT return
	**	only ones (0xffffffff) from all offsets.
	*/

	for (i=0; i<vsize; i+=4) {
		u_long* addr = (u_long*) (vaddr+i);
		data = *addr;
		if (data != 0xffffffff)
			break;
	};

	if ((data==0xffffffff) && !oldmap) {
		printf ("\t(possible mapping problem: "
			"at 0x%x read 0xffffffff)\n",
			(unsigned) paddr);
		pci_paddr = 0;
		goto next_try;
	};

	/*
	**	Return addresses to the driver
	*/

	*va = vaddr;
	*pa = paddr;

	return (1);
}

/*-----------------------------------------------------------------------
**
**	Map new pci bus. (XXX under construction)
**
**	PCI-Specification: ____________?
**
**-----------------------------------------------------------------------
*/

int pci_map_bus (pcici_t tag, u_long bus)
{
	if (bus >= PCI_MAX_BUS) {
		printf ("pci_map_bus failed: bus number %d too big.\n",
			(int) bus);
		return (0);
	};

	if (bus >= pci_bus_max)
		pci_bus_max = bus + 1;

#ifndef PCI_QUIET
	/*
	**	display values.
	*/

	printf ("\tmapped pci bus %d.\n",
		(int) bus);
#endif

	return (1);
}

/*------------------------------------------------------------
**
**	Interface functions for the devconf module.
**
**------------------------------------------------------------
*/

static int
pci_externalize (struct proc *p, struct kern_devconf *kdcp, void *u, size_t l)
{
	struct pci_externalize_buffer buffer;
	struct pci_info * pip = kdcp->kdc_parentdata;
	pcici_t tag;
	int	i;

	if (l < sizeof buffer) {
		return ENOMEM;
	};

	tag = pcibus.pb_tag (pip->pi_bus, pip->pi_device, 0);

	buffer.peb_pci_info	= *pip;

	for (i=0; i<PCI_EXT_CONF_LEN; i++) {
		buffer.peb_config[i] = pcibus.pb_read (tag, i*4);
	};

	return copyout(&buffer, u, sizeof buffer);
}
 
 
static int
pci_internalize (struct proc *p, struct kern_devconf *kdcp, void *u, size_t s)
{
	return EOPNOTSUPP;
}

/*-----------------------------------------------------------------------
**
**	Map pci interrupts to isa interrupts.
**
**-----------------------------------------------------------------------
*/

int pci_map_int (pcici_t tag, int(*func)(), void* arg, unsigned* maskptr)
{
	int irq, result;

	irq = PCI_INTERRUPT_LINE_EXTRACT(
		pcibus.pb_read (tag, PCI_INTERRUPT_REG));

	if (irq >= 16 || irq <= 0) {
		printf ("pci_map_int failed: no int line set.\n");
		return (0);
	}

	result = pcibus.pb_regint (tag, func, arg, maskptr);

	if (!result) {
		printf ("pci_map_int failed.\n");
		return (0);
	};

	return (1);
}

/*-----------------------------------------------------------
**
**	Display of unknown devices.
**
**-----------------------------------------------------------
*/
struct vt {
	u_short	ident;
	char*	name;
};

static struct vt VendorTable[] = {
	{0x1002, "ATI TECHNOLOGIES INC"},
	{0x1011, "DIGITAL EQUIPMENT CORPORATION"},
	{0x101A, "NCR"},
	{0x102B, "MATROX"},
	{0x1045, "OPTI"},
	{0x5333, "S3 INC."},
	{0x8086, "INTEL CORPORATION"},
	{0,0}
};

static const char *const majclasses[] = {
	"old", "storage", "network", "display",
	"multimedia", "memory", "bridge" 
};

void not_supported (pcici_t tag, u_long type)
{
	u_char	reg;
	u_long	data;
	struct vt * vp;

	/*
	**	lookup the names.
	*/

	for (vp=VendorTable; vp->ident; vp++)
		if (vp->ident == (type & 0xffff))
			break;

	/*
	**	and display them.
	*/

	if (vp->ident) printf (vp->name);
		else   printf ("vendor=0x%lx", type & 0xffff);

	printf (", device=0x%lx", type >> 16);

	data = (pcibus.pb_read(tag, PCI_CLASS_REG) >> 24) & 0xff;
	if (data < sizeof(majclasses) / sizeof(majclasses[0]))
		printf(", class=%s", majclasses[data]);

	printf (" [not supported]\n");

	for (reg=PCI_MAP_REG_START; reg<PCI_MAP_REG_END; reg+=4) {
		data = pcibus.pb_read (tag, reg);
		if (!data) continue;
		switch (data&7) {

		case 1:
		case 5:
			printf ("	map(%x): io(%lx)\n",
				reg, data & ~3);
			break;
		case 0:
			printf ("	map(%x): mem32(%lx)\n",
				reg, data & ~7);
			break;
		case 2:
			printf ("	map(%x): mem20(%lx)\n",
				reg, data & ~7);
			break;
		case 4:
			printf ("	map(%x): mem64(%lx)\n",
				reg, data & ~7);
			break;
		}
	}
}

#ifndef __FreeBSD2__
/*-----------------------------------------------------------
**
**	Mapping of physical to virtual memory
**
**-----------------------------------------------------------
*/

extern vm_map_t kernel_map;

static	vm_offset_t pmap_mapdev (vm_offset_t paddr, vm_size_t vsize)
{
	vm_offset_t	vaddr,value;
	u_long		result;

	vaddr  = vm_map_min (kernel_map);

	result = vm_map_find (kernel_map, (void*)0, (vm_offset_t) 0,
				&vaddr, vsize, TRUE);

	if (result != KERN_SUCCESS) {
		printf (" vm_map_find failed(%d)\n", result);
		return (0);
	};

	/*
	**	map physical
	*/

	value = vaddr;
	while (vsize >= NBPG) {
		pmap_enter (pmap_kernel(), vaddr, paddr,
				VM_PROT_READ|VM_PROT_WRITE, TRUE);
		vaddr += NBPG;
		paddr += NBPG;
		vsize -= NBPG;
	};
	return (value);
}

/*------------------------------------------------------------
**
**	Emulate the register_intr() function of FreeBSD 2.0
**
**	requires a patch:
**	FreeBSD 2.0:	"/sys/i386/isa/vector.s"
**	386bsd0.1:	"/sys/i386/isa/icu.s"
**	386bsd1.0:	Please ask Jesus Monroy Jr.
**
**------------------------------------------------------------
*/

#include <machine/segments.h>

int		pci_int_unit [16];
inthand2_t*    (pci_int_hdlr [16]);
unsigned int *	pci_int_mptr [16];
unsigned int	pci_int_count[16];

extern void
	Vpci3(), Vpci4(), Vpci5(), Vpci6(), Vpci7(), Vpci8(), Vpci9(),
	Vpci10(), Vpci11(), Vpci12(), Vpci13(), Vpci14(), Vpci15();

static inthand_t* pci_int_glue[16] = {
	0, 0, 0, Vpci3, Vpci4, Vpci5, Vpci6, Vpci7, Vpci8,
	Vpci9, Vpci10, Vpci11, Vpci12, Vpci13, Vpci14, Vpci15 };

static int
register_intr __P((int intr, int device_id, unsigned int flags,
		       inthand2_t *handler, unsigned int* mptr, int unit))
{
	if (intr >= 16 || intr <= 2)
		return (EINVAL);
	if (pci_int_hdlr [intr])
		return (EBUSY);

	pci_int_hdlr [intr] = handler;
	pci_int_unit [intr] = unit;
	pci_int_mptr [intr] = mptr;

	setidt(NRSVIDT + intr, pci_int_glue[intr], SDT_SYS386IGT, SEL_KPL);
	return (0);
}
#endif /* __FreeBSD2__ */
#endif /* NPCI */