1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
|
/*
* Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
* Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Cirrus Logic CD180 registers
*/
/* Global registers */
#define CD180_GIVR 0x40 /* Global Interrupt Verctor Register */
#define CD180_GICR 0x41 /* Global Interrupting Channel Register */
#define CD180_PILR1 0x61 /* Priority Interrupt Level Register 1 */
#define CD180_PILR2 0x62 /* Priority Interrupt Level Register 2 */
#define CD180_PILR3 0x63 /* Priority Interrupt Level Register 3 */
#define CD180_CAR 0x64 /* Channel Access Register */
#define CD180_GFRCR 0x6B /* Global Firmware Revision Code Register */
#define CD180_PPRH 0x70 /* Prescaler Period Register MSB */
#define CD180_PPRL 0x71 /* Prescaler Period Register LSB */
#define CD180_RDR 0x78 /* Receiver Data Register */
#define CD180_RCSR 0x7A /* Receiver Character Status Register */
#define CD180_TDR 0x7B /* Transmit Data Register */
#define CD180_EOIR 0x7F /* End of Interrupt Register */
/* Channel Registers */
#define CD180_CCR 0x01 /* Channel Command Register */
#define CD180_IER 0x02 /* Interrupt Enable Register */
#define CD180_COR1 0x03 /* Channel Option Register 1 */
#define CD180_COR2 0x04 /* Channel Option Register 1 */
#define CD180_COR3 0x05 /* Channel Option Register 1 */
#define CD180_CCSR 0x06 /* Channel Control STatus Register */
#define CD180_RDCR 0x07 /* Receive Data Count Register */
#define CD180_SCHR1 0x09 /* Special Character Register 1 */
#define CD180_SCHR2 0x0A /* Special Character Register 2 */
#define CD180_SCHR3 0x0B /* Special Character Register 3 */
#define CD180_SCHR4 0x0C /* Special Character Register 4 */
#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */
#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */
#define CD180_MCR 0x12 /* Modem Change Register */
#define CD180_RTPR 0x18 /* Receive Timeout Period Register */
#define CD180_MSVR 0x28 /* Modem Signal Value Register */
#define CD180_RBPRH 0x31 /* Receive Baud Rate Period Register MSB */
#define CD180_RBPRL 0x32 /* Receive Baud Rate Period Register LSB */
#define CD180_TBPRH 0x39 /* Transmit Baud Rate Period Register MSB */
#define CD180_TBPRL 0x3A /* Transmit Baud Rate Period Register LSB */
/** Register descritpions **/
/* Global Interrupt Vector Register */
#define GIVR_IT_MSCI 0x01 /* Modem Signal Change Interrupt */
#define GIVR_IT_TDI 0x02 /* Transmit Data Interrupt */
#define GIVR_IT_RGDI 0x03 /* Receive Good Data Interrupt */
#define GIVR_IT_REI 0x07 /* Receive Exception Interrupt */
/* Global Interrupt Channel Register */
#define GICR_CHAN 0x1C /* Channel Number Mask */
#define GICR_LSH 2 /* Channel Number Shift */
/* Channel Address Register */
#define CAR_CHAN 0x07 /* Channel Number Mask */
#define CAR_A7 0x08 /* Addres bit 7 (unused) */
/* Receive Character Status Register */
#define RCSR_OE 0x01 /* Overrun Error */
#define RCSR_FE 0x02 /* Frame Error */
#define RCSR_PE 0x04 /* Parity Error */
#define RCSR_Break 0x08 /* Break detected */
#define RCSR_Timeout 0x80 /* Rx Timeout */
#define RCSR_SCMASK 0x70 /* Special Character Detected Mask */
#define RCSR_SC1 0x10 /* Special Char 1 (or 1 & 3 seq matched) */
#define RCSR_SC2 0x20 /* Special Char 2 (or 2 & 4 seq matched) */
#define RCSR_SC3 0x30 /* Special Char 3 */
#define RCSR_SC4 0x40 /* Special Char 4 */
/* Channel Command Register */
#define CCR_ResetChan 0x80 /* Reset Channel */
#define CCR_HWRESET 0x81 /* Hardware Reset (all channels) */
#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */
#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */
#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */
#define CCR_SENDSPCH1 0x21 /* Send Special Character 1 */
#define CCR_SENDSPCH2 0x22 /* Send Special Character 2 */
#define CCR_SENDSPCH3 0x23 /* Send Special Character 3 */
#define CCR_SENDSPCH4 0x24 /* Send Special Character 4 */
#define CCR_RCVRDIS 0x11 /* Receiver Disable */
#define CCR_RCVREN 0x12 /* Receiver Enable */
#define CCR_XMTRDIS 0x14 /* Transmitter Disable */
#define CCR_XMTREN 0x18 /* Transmitter Enable */
/* Interrupt Enable Register */
#define IER_DSR 0x80 /* Enable interrupt on DSR change */
#define IER_CD 0x40 /* Enable interrupt on CD change */
#define IER_CTS 0x20 /* Enable interrupt on CTS change */
#define IER_RxData 0x10 /* Enable interrupt on Receive Data */
#define IER_RxSC 0x08 /* Enable interrupt on Receive Spec. Char */
#define IER_TxRdy 0x04 /* Enable interrupt on TX FIFO empty */
#define IER_TxMpty 0x02 /* Enable interrupt on TX completely empty*/
#define IER_RET 0x01 /* Enable interrupt on RX Except. Timeout */
/* Channel Option Register 1 */
#define COR1_ODDP 0x80 /* Odd Parity */
#define COR1_ParMMASK 0x60 /* Parity Mode mask */
#define COR1_NOPAR 0x02 /* No Parity */
#define COR1_FORCEPAR 0x20 /* Force Parity */
#define COR1_NORMPAR 0x40 /* Normal Parity */
#define COR1_Ignore 0x10 /* Ignore Parity on RX */
#define COR1_StopMASK 0x0C /* Stop Bits mode mask */
#define COR1_1SB 0x00 /* 1 Stop Bit */
#define COR1_15SB 0x04 /* 1.5 Stop Bits */
#define COR1_2SB 0x08 /* 2 Stop Bits */
#define COR1_CHLMASK 0x03 /* Character Length mask */
#define COR1_5BITS 0x00 /* 5 bits */
#define COR1_6BITS 0x01 /* 6 bits */
#define COR1_7BITS 0x02 /* 7 bits */
#define COR1_8BITS 0x03 /* 8 bits */
/* Channel Option Register 2 */
#define COR2_IXM 0x80 /* Implied XON mode */
#define COR2_TxIBE 0x40 /* Enable In-Band XON/XOFF Flow Control */
#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */
#define COR2_LLM 0x10 /* Local Loopback Mode */
#define COR2_RLM 0x08 /* Remote Loopback Mode */
#define COR2_RtsAO 0x04 /* RTS Automatic Output Enable */
#define COR2_CtsAE 0x02 /* CTS Automatic Enable */
#define COR2_DsrAE 0x01 /* DSR Automatic Enable */
/* Channel Option Register 3 */
#define COR3_XonCH 0x80 /* XON is a double seq (1 & 3) */
#define COR3_XoffCH 0x40 /* XOFF is a double seq (1 & 3) */
#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */
#define COR3_SCDE 0x10 /* Special Character Detection Enable */
#define COR3_RxTHMASK 0x0F /* RX FIFO Threshold value (1-8) */
/* Channel Control Status Register */
#define CCSR_RxEn 0x80 /* Revceiver Enabled */
#define CCSR_RxFloff 0x40 /* Receive Flow Off (XOFF sent) */
#define CCSR_RxFlon 0x20 /* Receive Flow On (XON sent) */
#define CCSR_TxEn 0x08 /* Transmitter Enabled */
#define CCSR_TxFloff 0x04 /* Transmit Flow Off (got XOFF) */
#define CCSR_TxFlon 0x02 /* Transmit Flow On (got XON) */
/* Modem Change Option Register 1 */
#define MCOR1_DSRzd 0x80 /* Detect 0->1 transition of DSR */
#define MCOR1_CDzd 0x40 /* Detect 0->1 transition of CD */
#define MCOR1_CTSzd 0x20 /* Detect 0->1 transition of CTS */
#define MCOR1_DTRthMASK 0x0F /* Automatic DTR FC Threshold (1-8) chars */
/* Modem Change Option Register 2 */
#define MCOR2_DSRod 0x80 /* Detect 1->0 transition of DSR */
#define MCOR2_CDod 0x40 /* Detect 1->0 transition of CD */
#define MCOR2_CTSod 0x20 /* Detect 1->0 transition of CTS */
/* Modem Change Register */
#define MCR_DSRchg 0x80 /* DSR Changed */
#define MCR_CDchg 0x40 /* CD Changed */
#define MCR_CTSchg 0x20 /* CTS Changed */
/* Modem Signal Value Register */
#define MSVR_DSR 0x80 /* Current state of DSR input */
#define MSVR_CD 0x40 /* Current state of DSR input */
#define MSVR_CTS 0x20 /* Current state of CTS input */
#define MSVR_DTR 0x02 /* Current state of DTR output */
#define MSVR_RTS 0x01 /* Current state of RTS output */
/* Escape characters */
#define CD180_C_ESC 0x00 /* Escape character */
#define CD180_C_SBRK 0x81 /* Start sending BREAK */
#define CD180_C_DELAY 0x82 /* Delay output */
#define CD180_C_EBRK 0x83 /* Stop sending BREAK */
/* Miscellaneous */
#define CD180_NCHAN 8 /* 8 channels per chip */
#define CD180_CTICKS 16 /* 16 ticks for character processing */
#define CD180_NFIFO 8 /* 8 bytes in FIFO */
|
