path: root/sys/dev/hme/if_hme_pci.c

/*-
 * Copyright (c) 2000 Matthew R. Green
 * Copyright (c) 2007 Marius Strobl <marius@FreeBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	from: NetBSD: if_hme_pci.c,v 1.14 2004/03/17 08:58:23 martin Exp
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * PCI front-end device driver for the HME ethernet device.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/resource.h>
#include <sys/socket.h>

#include <machine/bus.h>
#if defined(__powerpc__) || defined(__sparc64__)
#include <dev/ofw/openfirm.h>
#include <machine/ofw_machdep.h>
#endif
#include <machine/resource.h>

#include <sys/rman.h>

#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_media.h>

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>

#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>

#include <dev/hme/if_hmereg.h>
#include <dev/hme/if_hmevar.h>

#include "miibus_if.h"

struct hme_pci_softc {
	struct	hme_softc	hsc_hme;	/* HME device */
	struct	resource	*hsc_sres;
	struct	resource	*hsc_ires;
	void			*hsc_ih;
};

static int hme_pci_probe(device_t);
static int hme_pci_attach(device_t);
static int hme_pci_detach(device_t);
static int hme_pci_suspend(device_t);
static int hme_pci_resume(device_t);

static device_method_t hme_pci_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		hme_pci_probe),
	DEVMETHOD(device_attach,	hme_pci_attach),
	DEVMETHOD(device_detach,	hme_pci_detach),
	DEVMETHOD(device_suspend,	hme_pci_suspend),
	DEVMETHOD(device_resume,	hme_pci_resume),
	/* Can just use the suspend method here. */
	DEVMETHOD(device_shutdown,	hme_pci_suspend),

	/* bus interface */
	DEVMETHOD(bus_print_child,	bus_generic_print_child),
	DEVMETHOD(bus_driver_added,	bus_generic_driver_added),

	/* MII interface */
	DEVMETHOD(miibus_readreg,	hme_mii_readreg),
	DEVMETHOD(miibus_writereg,	hme_mii_writereg),
	DEVMETHOD(miibus_statchg,	hme_mii_statchg),

	{ 0, 0 }
};

static driver_t hme_pci_driver = {
	"hme",
	hme_pci_methods,
	sizeof(struct hme_pci_softc)
};

DRIVER_MODULE(hme, pci, hme_pci_driver, hme_devclass, 0, 0);
MODULE_DEPEND(hme, pci, 1, 1, 1);
MODULE_DEPEND(hme, ether, 1, 1, 1);

#define	PCI_VENDOR_SUN			0x108e
#define	PCI_PRODUCT_SUN_EBUS		0x1000
#define	PCI_PRODUCT_SUN_HMENETWORK	0x1001

int
hme_pci_probe(device_t dev)
{

	if (pci_get_vendor(dev) == PCI_VENDOR_SUN &&
	    pci_get_device(dev) == PCI_PRODUCT_SUN_HMENETWORK) {
		device_set_desc(dev, "Sun HME 10/100 Ethernet");
		return (BUS_PROBE_DEFAULT);
	}
	return (ENXIO);
}

int
hme_pci_attach(device_t dev)
{
	struct hme_pci_softc *hsc;
	struct hme_softc *sc;
	bus_space_tag_t	memt;
	bus_space_handle_t memh;
	int i, error = 0;
#if !(defined(__powerpc__) || defined(__sparc64__))
	device_t *children, ebus_dev;
	struct resource *ebus_rres;
	int j, slot;
#endif

	pci_enable_busmaster(dev);
	/*
	 * Some Sun HMEs do have their intpin register bogusly set to 0,
	 * although it should be 1.  Correct that.
	 */
	if (pci_get_intpin(dev) == 0)
		pci_set_intpin(dev, 1);

	hsc = device_get_softc(dev);
	sc = &hsc->hsc_hme;
	sc->sc_dev = dev;
	sc->sc_flags |= HME_PCI;
	mtx_init(&sc->sc_lock, device_get_nameunit(dev), MTX_NETWORK_LOCK,
	    MTX_DEF);

	/*
	 * Map five register banks:
	 *
	 *	bank 0: HME SEB registers:	+0x0000
	 *	bank 1: HME ETX registers:	+0x2000
	 *	bank 2: HME ERX registers:	+0x4000
	 *	bank 3: HME MAC registers:	+0x6000
	 *	bank 4: HME MIF registers:	+0x7000
	 *
	 */
	i = PCIR_BAR(0);
	hsc->hsc_sres = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
	    &i, RF_ACTIVE);
	if (hsc->hsc_sres == NULL) {
		device_printf(dev, "could not map device registers\n");
		error = ENXIO;
		goto fail_mtx;
	}
	i = 0;
	hsc->hsc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ,
	    &i, RF_SHAREABLE | RF_ACTIVE);
	if (hsc->hsc_ires == NULL) {
		device_printf(dev, "could not allocate interrupt\n");
		error = ENXIO;
		goto fail_sres;
	}
	memt = rman_get_bustag(hsc->hsc_sres);
	memh = rman_get_bushandle(hsc->hsc_sres);
	sc->sc_sebt = sc->sc_etxt = sc->sc_erxt = sc->sc_mact = sc->sc_mift =
	    memt;
	bus_space_subregion(memt, memh, 0x0000, 0x1000, &sc->sc_sebh);
	bus_space_subregion(memt, memh, 0x2000, 0x1000, &sc->sc_etxh);
	bus_space_subregion(memt, memh, 0x4000, 0x1000, &sc->sc_erxh);
	bus_space_subregion(memt, memh, 0x6000, 0x1000, &sc->sc_mach);
	bus_space_subregion(memt, memh, 0x7000, 0x1000, &sc->sc_mifh);

#if defined(__powerpc__) || defined(__sparc64__)
	OF_getetheraddr(dev, sc->sc_enaddr);
#else
	/*
	 * Dig out VPD (vital product data) and read NA (network address).
	 *
	 * The PCI HME is a PCIO chip, which is composed of two functions:
	 *	function 0: PCI-EBus2 bridge, and
	 *	function 1: HappyMeal Ethernet controller.
	 *
	 * The VPD of HME resides in the Boot PROM (PCI FCode) attached
	 * to the EBus bridge and can't be accessed via the PCI capability
	 * pointer.
	 * ``Writing FCode 3.x Programs'' (newer ones, dated 1997 and later)
	 * chapter 2 describes the data structure.
	 *
	 * We don't have a MI EBus driver since no EBus device exists
	 * (besides the FCode PROM) on add-on HME boards.  The ``no driver
	 * attached'' message for function 0 therefore is what is expected.
	 */

#define	PCI_ROMHDR_SIZE			0x1c
#define	PCI_ROMHDR_SIG			0x00
#define	PCI_ROMHDR_SIG_MAGIC		0xaa55		/* little endian */
#define	PCI_ROMHDR_PTR_DATA		0x18
#define	PCI_ROM_SIZE			0x18
#define	PCI_ROM_SIG			0x00
#define	PCI_ROM_SIG_MAGIC		0x52494350	/* "PCIR", endian */
							/* reversed */
#define	PCI_ROM_VENDOR			0x04
#define	PCI_ROM_DEVICE			0x06
#define	PCI_ROM_PTR_VPD			0x08
#define	PCI_VPDRES_BYTE0		0x00
#define	PCI_VPDRES_ISLARGE(x)		((x) & 0x80)
#define	PCI_VPDRES_LARGE_NAME(x)	((x) & 0x7f)
#define	PCI_VPDRES_TYPE_VPD		0x10		/* large */
#define	PCI_VPDRES_LARGE_LEN_LSB	0x01
#define	PCI_VPDRES_LARGE_LEN_MSB	0x02
#define	PCI_VPDRES_LARGE_DATA		0x03
#define	PCI_VPD_SIZE			0x03
#define	PCI_VPD_KEY0			0x00
#define	PCI_VPD_KEY1			0x01
#define	PCI_VPD_LEN			0x02
#define	PCI_VPD_DATA			0x03

#define	HME_ROM_READ_N(n, offs)	bus_space_read_ ## n (memt, memh, (offs))
#define	HME_ROM_READ_1(offs)	HME_ROM_READ_N(1, (offs))
#define	HME_ROM_READ_2(offs)	HME_ROM_READ_N(2, (offs))
#define	HME_ROM_READ_4(offs)	HME_ROM_READ_N(4, (offs))

	/* Search accompanying EBus bridge. */
	slot = pci_get_slot(dev);
	if (device_get_children(device_get_parent(dev), &children, &i) != 0) {
		device_printf(dev, "could not get children\n");
		error = ENXIO;
		goto fail_sres;
	}
	ebus_dev = NULL;
	for (j = 0; j < i; j++) {
		if (pci_get_class(children[j]) == PCIC_BRIDGE &&
		    pci_get_vendor(children[j]) == PCI_VENDOR_SUN &&
		    pci_get_device(children[j]) == PCI_PRODUCT_SUN_EBUS &&
		    pci_get_slot(children[j]) == slot) {
			ebus_dev = children[j];
			break;
		}
	}
	if (ebus_dev == NULL) {
		device_printf(dev, "could not find EBus bridge\n");
		error = ENXIO;
		goto fail_children;
	}

	/* Map EBus bridge PROM registers. */
	i = PCIR_BAR(0);
	if ((ebus_rres = bus_alloc_resource_any(ebus_dev, SYS_RES_MEMORY,
	    &i, RF_ACTIVE)) == NULL) {
		device_printf(dev, "could not map PROM registers\n");
		error = ENXIO;
		goto fail_children;
	}
	memt = rman_get_bustag(ebus_rres);
	memh = rman_get_bushandle(ebus_rres);

	/* Read PCI Expansion ROM header. */
	if (HME_ROM_READ_2(PCI_ROMHDR_SIG) != PCI_ROMHDR_SIG_MAGIC ||
	    (i = HME_ROM_READ_2(PCI_ROMHDR_PTR_DATA)) < PCI_ROMHDR_SIZE) {
		device_printf(dev, "unexpected PCI Expansion ROM header\n");
		error = ENXIO;
		goto fail_rres;
	}

	/* Read PCI Expansion ROM data. */
	if (HME_ROM_READ_4(i + PCI_ROM_SIG) != PCI_ROM_SIG_MAGIC ||
	    HME_ROM_READ_2(i + PCI_ROM_VENDOR) != pci_get_vendor(dev) ||
	    HME_ROM_READ_2(i + PCI_ROM_DEVICE) != pci_get_device(dev) ||
	    (j = HME_ROM_READ_2(i + PCI_ROM_PTR_VPD)) < i + PCI_ROM_SIZE) {
		device_printf(dev, "unexpected PCI Expansion ROM data\n");
		error = ENXIO;
		goto fail_rres;
	}

	/*
	 * Read PCI VPD.
	 * SUNW,hme cards have a single large resource VPD-R tag
	 * containing one NA.  SUNW,qfe cards have four large resource
	 * VPD-R tags containing one NA each (all four HME chips share
	 * the same PROM).
	 * The VPD used on both cards is not in PCI 2.2 standard format
	 * however.  The length in the resource header is in big endian
	 * and the end tag is non-standard (0x79) and followed by an
	 * all-zero "checksum" byte.  Sun calls this a "Fresh Choice
	 * Ethernet" VPD...
	 */
	/* Look at the end tag to determine whether this is a VPD with 4 NAs. */
	if (HME_ROM_READ_1(j + PCI_VPDRES_LARGE_DATA + PCI_VPD_SIZE +
	    ETHER_ADDR_LEN) != 0x79 &&
	    HME_ROM_READ_1(j + 4 * (PCI_VPDRES_LARGE_DATA + PCI_VPD_SIZE +
	    ETHER_ADDR_LEN)) == 0x79)
		/* Use the Nth NA for the Nth HME on this SUNW,qfe. */
		j += slot * (PCI_VPDRES_LARGE_DATA + PCI_VPD_SIZE +
		    ETHER_ADDR_LEN);
	if (PCI_VPDRES_ISLARGE(HME_ROM_READ_1(j + PCI_VPDRES_BYTE0)) == 0 ||
	    PCI_VPDRES_LARGE_NAME(HME_ROM_READ_1(j + PCI_VPDRES_BYTE0)) !=
	    PCI_VPDRES_TYPE_VPD ||
	    (HME_ROM_READ_1(j + PCI_VPDRES_LARGE_LEN_LSB) << 8 |
	    HME_ROM_READ_1(j + PCI_VPDRES_LARGE_LEN_MSB)) !=
	    PCI_VPD_SIZE + ETHER_ADDR_LEN ||
	    HME_ROM_READ_1(j + PCI_VPDRES_LARGE_DATA + PCI_VPD_KEY0) !=
	    0x4e /* N */ ||
	    HME_ROM_READ_1(j + PCI_VPDRES_LARGE_DATA + PCI_VPD_KEY1) !=
	    0x41 /* A */ ||
	    HME_ROM_READ_1(j + PCI_VPDRES_LARGE_DATA + PCI_VPD_LEN) !=
	    ETHER_ADDR_LEN) {
		device_printf(dev, "unexpected PCI VPD\n");
		error = ENXIO;
		goto fail_rres;
	}
	bus_space_read_region_1(memt, memh, j + PCI_VPDRES_LARGE_DATA +
	    PCI_VPD_DATA, sc->sc_enaddr, ETHER_ADDR_LEN);

fail_rres:
	bus_release_resource(ebus_dev, SYS_RES_MEMORY,
	    rman_get_rid(ebus_rres), ebus_rres);
fail_children:
	free(children, M_TEMP);
	if (error != 0)
		goto fail_sres;
#endif

	sc->sc_burst = 64;	/* XXX */

	/*
	 * call the main configure
	 */
	if ((error = hme_config(sc)) != 0) {
		device_printf(dev, "could not be configured\n");
		goto fail_ires;
	}

	if ((error = bus_setup_intr(dev, hsc->hsc_ires, INTR_TYPE_NET |
	    INTR_MPSAFE, NULL, hme_intr, sc, &hsc->hsc_ih)) != 0) {
		device_printf(dev, "couldn't establish interrupt\n");
		hme_detach(sc);
		goto fail_ires;
	}
	return (0);

fail_ires:
	bus_release_resource(dev, SYS_RES_IRQ,
	    rman_get_rid(hsc->hsc_ires), hsc->hsc_ires);
fail_sres:
	bus_release_resource(dev, SYS_RES_MEMORY,
	    rman_get_rid(hsc->hsc_sres), hsc->hsc_sres);
fail_mtx:
	mtx_destroy(&sc->sc_lock);
	return (error);
}

static int
hme_pci_detach(device_t dev)
{
	struct hme_pci_softc *hsc;
	struct hme_softc *sc;

	hsc = device_get_softc(dev);
	sc = &hsc->hsc_hme;
	bus_teardown_intr(dev, hsc->hsc_ires, hsc->hsc_ih);
	hme_detach(sc);
	bus_release_resource(dev, SYS_RES_IRQ,
	    rman_get_rid(hsc->hsc_ires), hsc->hsc_ires);
	bus_release_resource(dev, SYS_RES_MEMORY,
	    rman_get_rid(hsc->hsc_sres), hsc->hsc_sres);
	mtx_destroy(&sc->sc_lock);
	return (0);
}

static int
hme_pci_suspend(device_t dev)
{
	struct hme_pci_softc *hsc;

	hsc = device_get_softc(dev);
	hme_suspend(&hsc->hsc_hme);
	return (0);
}

static int
hme_pci_resume(device_t dev)
{
	struct hme_pci_softc *hsc;

	hsc = device_get_softc(dev);
	hme_resume(&hsc->hsc_hme);
	return (0);
}