path: root/sys/dev/ath/ath_hal/ar5416/ar5416_interrupts.c

/*
 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
 * Copyright (c) 2002-2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $FreeBSD$
 */
#include "opt_ah.h"

#include "ah.h"
#include "ah_internal.h"

#include "ar5416/ar5416.h"
#include "ar5416/ar5416reg.h"

/*
 * Checks to see if an interrupt is pending on our NIC
 *
 * Returns: TRUE    if an interrupt is pending
 *          FALSE   if not
 */
HAL_BOOL
ar5416IsInterruptPending(struct ath_hal *ah)
{
	uint32_t isr;

	if (AR_SREV_HOWL(ah))
		return AH_TRUE;

	/* 
	 * Some platforms trigger our ISR before applying power to
	 * the card, so make sure the INTPEND is really 1, not 0xffffffff.
	 */
	isr = OS_REG_READ(ah, AR_INTR_ASYNC_CAUSE);
	if (isr != AR_INTR_SPURIOUS && (isr & AR_INTR_MAC_IRQ) != 0)
		return AH_TRUE;

	isr = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE);
	if (isr != AR_INTR_SPURIOUS && (isr & AR_INTR_SYNC_DEFAULT))
		return AH_TRUE;

	return AH_FALSE;
}

/*
 * Reads the Interrupt Status Register value from the NIC, thus deasserting
 * the interrupt line, and returns both the masked and unmasked mapped ISR
 * values.  The value returned is mapped to abstract the hw-specific bit
 * locations in the Interrupt Status Register.
 *
 * (*masked) is cleared on initial call.
 *
 * Returns: A hardware-abstracted bitmap of all non-masked-out
 *          interrupts pending, as well as an unmasked value
 */
HAL_BOOL
ar5416GetPendingInterrupts(struct ath_hal *ah, HAL_INT *masked)
{
	uint32_t isr, isr0, isr1, sync_cause = 0, o_sync_cause = 0;
	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;

#ifdef	AH_INTERRUPT_DEBUGGING
	/*
	 * Blank the interrupt debugging area regardless.
	 */
	bzero(&ah->ah_intrstate, sizeof(ah->ah_intrstate));
	ah->ah_syncstate = 0;
#endif

	/*
	 * Verify there's a mac interrupt and the RTC is on.
	 */
	if (AR_SREV_HOWL(ah)) {
		*masked = 0;
		isr = OS_REG_READ(ah, AR_ISR);
	} else {
		if ((OS_REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) &&
		    (OS_REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M) == AR_RTC_STATUS_ON)
			isr = OS_REG_READ(ah, AR_ISR);
		else
			isr = 0;
#ifdef	AH_INTERRUPT_DEBUGGING
		ah->ah_syncstate =
#endif
		o_sync_cause = sync_cause = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE);
		sync_cause &= AR_INTR_SYNC_DEFAULT;
		*masked = 0;

		if (isr == 0 && sync_cause == 0)
			return AH_FALSE;
	}

#ifdef	AH_INTERRUPT_DEBUGGING
	ah->ah_intrstate[0] = isr;
	ah->ah_intrstate[1] = OS_REG_READ(ah, AR_ISR_S0);
	ah->ah_intrstate[2] = OS_REG_READ(ah, AR_ISR_S1);
	ah->ah_intrstate[3] = OS_REG_READ(ah, AR_ISR_S2);
	ah->ah_intrstate[4] = OS_REG_READ(ah, AR_ISR_S3);
	ah->ah_intrstate[5] = OS_REG_READ(ah, AR_ISR_S4);
	ah->ah_intrstate[6] = OS_REG_READ(ah, AR_ISR_S5);
#endif

	if (isr != 0) {
		struct ath_hal_5212 *ahp = AH5212(ah);
		uint32_t mask2;

		mask2 = 0;
		if (isr & AR_ISR_BCNMISC) {
			uint32_t isr2 = OS_REG_READ(ah, AR_ISR_S2);
			if (isr2 & AR_ISR_S2_TIM)
				mask2 |= HAL_INT_TIM;
			if (isr2 & AR_ISR_S2_DTIM)
				mask2 |= HAL_INT_DTIM;
			if (isr2 & AR_ISR_S2_DTIMSYNC)
				mask2 |= HAL_INT_DTIMSYNC;
			if (isr2 & (AR_ISR_S2_CABEND ))
				mask2 |= HAL_INT_CABEND;
			if (isr2 & AR_ISR_S2_GTT)
				mask2 |= HAL_INT_GTT;
			if (isr2 & AR_ISR_S2_CST)
				mask2 |= HAL_INT_CST;	
			if (isr2 & AR_ISR_S2_TSFOOR)
				mask2 |= HAL_INT_TSFOOR;

			/*
			 * Don't mask out AR_BCNMISC; instead mask
			 * out what causes it.
			 */
			OS_REG_WRITE(ah, AR_ISR_S2, isr2);
			isr &= ~AR_ISR_BCNMISC;
		}

		if (isr == 0xffffffff) {
			*masked = 0;
			return AH_FALSE;
		}

		*masked = isr & HAL_INT_COMMON;

		if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
			*masked |= HAL_INT_RX;
		if (isr & (AR_ISR_TXMINTR | AR_ISR_TXINTM))
			*masked |= HAL_INT_TX;

		/*
		 * When doing RX interrupt mitigation, the RXOK bit is set
		 * in AR_ISR even if the relevant bit in AR_IMR is clear.
		 * Since this interrupt may be due to another source, don't
		 * just automatically set HAL_INT_RX if it's set, otherwise
		 * we could prematurely service the RX queue.
		 *
		 * In some cases, the driver can even handle all the RX
		 * frames just before the mitigation interrupt fires.
		 * The subsequent RX processing trip will then end up
		 * processing 0 frames.
		 */
#ifdef	AH_AR5416_INTERRUPT_MITIGATION
		if (isr & AR_ISR_RXERR)
			*masked |= HAL_INT_RX;
#else
		if (isr & (AR_ISR_RXOK | AR_ISR_RXERR))
			*masked |= HAL_INT_RX;
#endif

		if (isr & (AR_ISR_TXOK | AR_ISR_TXDESC | AR_ISR_TXERR |
		    AR_ISR_TXEOL)) {
			*masked |= HAL_INT_TX;

			isr0 = OS_REG_READ(ah, AR_ISR_S0);
			OS_REG_WRITE(ah, AR_ISR_S0, isr0);
			isr1 = OS_REG_READ(ah, AR_ISR_S1);
			OS_REG_WRITE(ah, AR_ISR_S1, isr1);

			/*
			 * Don't clear the primary ISR TX bits, clear
			 * what causes them (S0/S1.)
			 */
			isr &= ~(AR_ISR_TXOK | AR_ISR_TXDESC |
			    AR_ISR_TXERR | AR_ISR_TXEOL);

			ahp->ah_intrTxqs |= MS(isr0, AR_ISR_S0_QCU_TXOK);
			ahp->ah_intrTxqs |= MS(isr0, AR_ISR_S0_QCU_TXDESC);
			ahp->ah_intrTxqs |= MS(isr1, AR_ISR_S1_QCU_TXERR);
			ahp->ah_intrTxqs |= MS(isr1, AR_ISR_S1_QCU_TXEOL);
		}

		if ((isr & AR_ISR_GENTMR) || (! pCap->halAutoSleepSupport)) {
			uint32_t isr5;
			isr5 = OS_REG_READ(ah, AR_ISR_S5);
			OS_REG_WRITE(ah, AR_ISR_S5, isr5);
			isr &= ~AR_ISR_GENTMR;

			if (! pCap->halAutoSleepSupport)
				if (isr5 & AR_ISR_S5_TIM_TIMER)
					*masked |= HAL_INT_TIM_TIMER;
		}
		*masked |= mask2;
	}

	/*
	 * Since we're not using AR_ISR_RAC, clear the status bits
	 * for handled interrupts here. For bits whose interrupt
	 * source is a secondary register, those bits should've been
	 * masked out - instead of those bits being written back,
	 * their source (ie, the secondary status registers) should
	 * be cleared. That way there are no race conditions with
	 * new triggers coming in whilst they've been read/cleared.
	 */
	OS_REG_WRITE(ah, AR_ISR, isr);
	/* Flush previous write */
	OS_REG_READ(ah, AR_ISR);

	if (AR_SREV_HOWL(ah))
		return AH_TRUE;

	if (sync_cause != 0) {
		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: sync_cause=0x%x\n",
		    __func__,
		    o_sync_cause);
		if (sync_cause & (AR_INTR_SYNC_HOST1_FATAL | AR_INTR_SYNC_HOST1_PERR)) {
			*masked |= HAL_INT_FATAL;
		}
		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
			HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RADM CPL timeout\n",
			    __func__);
			OS_REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
			OS_REG_WRITE(ah, AR_RC, 0);
			*masked |= HAL_INT_FATAL;
		}
		/*
		 * On fatal errors collect ISR state for debugging.
		 */
		if (*masked & HAL_INT_FATAL) {
			AH_PRIVATE(ah)->ah_fatalState[0] = isr;
			AH_PRIVATE(ah)->ah_fatalState[1] = sync_cause;
			HALDEBUG(ah, HAL_DEBUG_ANY,
			    "%s: fatal error, ISR_RAC 0x%x SYNC_CAUSE 0x%x\n",
			    __func__, isr, sync_cause);
		}

		OS_REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
		/* NB: flush write */
		(void) OS_REG_READ(ah, AR_INTR_SYNC_CAUSE_CLR);
	}
	return AH_TRUE;
}

/*
 * Atomically enables NIC interrupts.  Interrupts are passed in
 * via the enumerated bitmask in ints.
 */
HAL_INT
ar5416SetInterrupts(struct ath_hal *ah, HAL_INT ints)
{
	struct ath_hal_5212 *ahp = AH5212(ah);
	uint32_t omask = ahp->ah_maskReg;
	uint32_t mask, mask2;

	HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: 0x%x => 0x%x\n",
	    __func__, omask, ints);

	if (omask & HAL_INT_GLOBAL) {
		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: disable IER\n", __func__);
		OS_REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
		(void) OS_REG_READ(ah, AR_IER);

		if (! AR_SREV_HOWL(ah)) {
			OS_REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, 0);
			(void) OS_REG_READ(ah, AR_INTR_ASYNC_ENABLE);

			OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
			(void) OS_REG_READ(ah, AR_INTR_SYNC_ENABLE);
		}
	}

	mask = ints & HAL_INT_COMMON;
	mask2 = 0;

#ifdef	AH_AR5416_INTERRUPT_MITIGATION
	/*
	 * Overwrite default mask if Interrupt mitigation
	 * is specified for AR5416
	 */
	if (ints & HAL_INT_RX)
		mask |= AR_IMR_RXERR | AR_IMR_RXMINTR | AR_IMR_RXINTM;
#else
	if (ints & HAL_INT_RX)
		mask |= AR_IMR_RXOK | AR_IMR_RXERR | AR_IMR_RXDESC;
#endif
	if (ints & HAL_INT_TX) {
		if (ahp->ah_txOkInterruptMask)
			mask |= AR_IMR_TXOK;
		if (ahp->ah_txErrInterruptMask)
			mask |= AR_IMR_TXERR;
		if (ahp->ah_txDescInterruptMask)
			mask |= AR_IMR_TXDESC;
		if (ahp->ah_txEolInterruptMask)
			mask |= AR_IMR_TXEOL;
		if (ahp->ah_txUrnInterruptMask)
			mask |= AR_IMR_TXURN;
	}
	if (ints & (HAL_INT_BMISC)) {
		mask |= AR_IMR_BCNMISC;
		if (ints & HAL_INT_TIM)
			mask2 |= AR_IMR_S2_TIM;
		if (ints & HAL_INT_DTIM)
			mask2 |= AR_IMR_S2_DTIM;
		if (ints & HAL_INT_DTIMSYNC)
			mask2 |= AR_IMR_S2_DTIMSYNC;
		if (ints & HAL_INT_CABEND)
			mask2 |= (AR_IMR_S2_CABEND );
		if (ints & HAL_INT_CST)
			mask2 |= AR_IMR_S2_CST;
		if (ints & HAL_INT_TSFOOR)
			mask2 |= AR_IMR_S2_TSFOOR;
	}

	if (ints & (HAL_INT_GTT | HAL_INT_CST)) {
		mask |= AR_IMR_BCNMISC;
		if (ints & HAL_INT_GTT)
			mask2 |= AR_IMR_S2_GTT;
		if (ints & HAL_INT_CST)
			mask2 |= AR_IMR_S2_CST;
	}

	/* Write the new IMR and store off our SW copy. */
	HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: new IMR 0x%x\n", __func__, mask);
	OS_REG_WRITE(ah, AR_IMR, mask);
	/* Flush write */
	(void) OS_REG_READ(ah, AR_IMR);

	mask = OS_REG_READ(ah, AR_IMR_S2) & ~(AR_IMR_S2_TIM |
					AR_IMR_S2_DTIM |
					AR_IMR_S2_DTIMSYNC |
					AR_IMR_S2_CABEND |
					AR_IMR_S2_CABTO  |
					AR_IMR_S2_TSFOOR |
					AR_IMR_S2_GTT |
					AR_IMR_S2_CST);
	OS_REG_WRITE(ah, AR_IMR_S2, mask | mask2);

	ahp->ah_maskReg = ints;

	/* Re-enable interrupts if they were enabled before. */
	if (ints & HAL_INT_GLOBAL) {
		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: enable IER\n", __func__);
		OS_REG_WRITE(ah, AR_IER, AR_IER_ENABLE);

		if (! AR_SREV_HOWL(ah)) {
			mask = AR_INTR_MAC_IRQ;
			if (ints & HAL_INT_GPIO)
				mask |= SM(AH5416(ah)->ah_gpioMask,
				    AR_INTR_ASYNC_MASK_GPIO);
			OS_REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, mask);
			OS_REG_WRITE(ah, AR_INTR_ASYNC_MASK, mask);

			mask = AR_INTR_SYNC_DEFAULT;
			if (ints & HAL_INT_GPIO)
				mask |= SM(AH5416(ah)->ah_gpioMask,
				    AR_INTR_SYNC_MASK_GPIO);
			OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, mask);
			OS_REG_WRITE(ah, AR_INTR_SYNC_MASK, mask);
		}
	}

	return omask;
}