1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
|
/***********************license start***************
* Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Networks nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Support library for the SPI
*
* <hr>$Revision: 49448 $<hr>
*/
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include <linux/module.h>
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-config.h>
#include <asm/octeon/cvmx-spxx-defs.h>
#include <asm/octeon/cvmx-stxx-defs.h>
#include <asm/octeon/cvmx-srxx-defs.h>
#include <asm/octeon/cvmx-pko.h>
#include <asm/octeon/cvmx-spi.h>
#include <asm/octeon/cvmx-clock.h>
#else
#include "cvmx.h"
#if !defined(__FreeBSD__) || !defined(_KERNEL)
#include "cvmx-config.h"
#endif
#include "cvmx-sysinfo.h"
#include "cvmx-pko.h"
#include "cvmx-spi.h"
#include "cvmx-clock.h"
#endif
#define INVOKE_CB(function_p, args...) \
do { \
if (function_p) { \
res = function_p(args); \
if (res) \
return res; \
} \
} while (0)
#if CVMX_ENABLE_DEBUG_PRINTS
static const char *modes[] = {"UNKNOWN", "TX Halfplex", "Rx Halfplex", "Duplex"};
#endif
/* Default callbacks, can be overridden
* using cvmx_spi_get_callbacks/cvmx_spi_set_callbacks
*/
static cvmx_spi_callbacks_t cvmx_spi_callbacks = {
.reset_cb = cvmx_spi_reset_cb,
.calendar_setup_cb = cvmx_spi_calendar_setup_cb,
.clock_detect_cb = cvmx_spi_clock_detect_cb,
.training_cb = cvmx_spi_training_cb,
.calendar_sync_cb = cvmx_spi_calendar_sync_cb,
.interface_up_cb = cvmx_spi_interface_up_cb
};
/**
* Get current SPI4 initialization callbacks
*
* @param callbacks Pointer to the callbacks structure.to fill
*
* @return Pointer to cvmx_spi_callbacks_t structure.
*/
void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t * callbacks)
{
memcpy(callbacks, &cvmx_spi_callbacks, sizeof(cvmx_spi_callbacks));
}
/**
* Set new SPI4 initialization callbacks
*
* @param new_callbacks Pointer to an updated callbacks structure.
*/
void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t * new_callbacks)
{
memcpy(&cvmx_spi_callbacks, new_callbacks, sizeof(cvmx_spi_callbacks));
}
/**
* Initialize and start the SPI interface.
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @param timeout Timeout to wait for clock synchronization in seconds
* @param num_ports Number of SPI ports to configure
*
* @return Zero on success, negative of failure.
*/
int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, int num_ports)
{
int res = -1;
if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)))
return res;
// Callback to perform SPI4 reset
INVOKE_CB( cvmx_spi_callbacks.reset_cb, interface, mode);
// Callback to perform calendar setup
INVOKE_CB(cvmx_spi_callbacks.calendar_setup_cb, interface, mode, num_ports);
// Callback to perform clock detection
INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout);
// Callback to perform SPI4 link training
INVOKE_CB(cvmx_spi_callbacks.training_cb, interface, mode, timeout);
// Callback to perform calendar sync
INVOKE_CB(cvmx_spi_callbacks.calendar_sync_cb, interface, mode, timeout);
// Callback to handle interface coming up
INVOKE_CB(cvmx_spi_callbacks.interface_up_cb, interface, mode);
return res;
}
/**
* This routine restarts the SPI interface after it has lost synchronization
* with its correspondent system.
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @param timeout Timeout to wait for clock synchronization in seconds
* @return Zero on success, negative of failure.
*/
int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
{
int res = -1;
if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)))
return res;
#if CVMX_ENABLE_DEBUG_PRINTS
cvmx_dprintf ("SPI%d: Restart %s\n", interface, modes[mode]);
#endif
// Callback to perform SPI4 reset
INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface,mode);
// NOTE: Calendar setup is not performed during restart
// Refer to cvmx_spi_start_interface() for the full sequence
// Callback to perform clock detection
INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout);
// Callback to perform SPI4 link training
INVOKE_CB(cvmx_spi_callbacks.training_cb, interface, mode, timeout);
// Callback to perform calendar sync
INVOKE_CB(cvmx_spi_callbacks.calendar_sync_cb, interface, mode, timeout);
// Callback to handle interface coming up
INVOKE_CB(cvmx_spi_callbacks.interface_up_cb, interface, mode);
return res;
}
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
EXPORT_SYMBOL(cvmx_spi_restart_interface);
#endif
/**
* Callback to perform SPI4 reset
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @return Zero on success, non-zero error code on failure (will cause SPI initialization to abort)
*/
int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode)
{
cvmx_spxx_dbg_deskew_ctl_t spxx_dbg_deskew_ctl;
cvmx_spxx_clk_ctl_t spxx_clk_ctl;
cvmx_spxx_bist_stat_t spxx_bist_stat;
cvmx_spxx_int_msk_t spxx_int_msk;
cvmx_stxx_int_msk_t stxx_int_msk;
cvmx_spxx_trn4_ctl_t spxx_trn4_ctl;
int index;
uint64_t MS = cvmx_clock_get_rate(CVMX_CLOCK_CORE) / 1000;
/* Disable SPI error events while we run BIST */
spxx_int_msk.u64 = cvmx_read_csr(CVMX_SPXX_INT_MSK(interface));
cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0);
stxx_int_msk.u64 = cvmx_read_csr(CVMX_STXX_INT_MSK(interface));
cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0);
/* Run BIST in the SPI interface */
cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), 0);
cvmx_write_csr(CVMX_STXX_COM_CTL(interface), 0);
spxx_clk_ctl.u64 = 0;
spxx_clk_ctl.s.runbist = 1;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
cvmx_wait (10 * MS);
spxx_bist_stat.u64 = cvmx_read_csr(CVMX_SPXX_BIST_STAT(interface));
if (spxx_bist_stat.s.stat0)
cvmx_dprintf("ERROR SPI%d: BIST failed on receive datapath FIFO\n", interface);
if (spxx_bist_stat.s.stat1)
cvmx_dprintf("ERROR SPI%d: BIST failed on RX calendar table\n", interface);
if (spxx_bist_stat.s.stat2)
cvmx_dprintf("ERROR SPI%d: BIST failed on TX calendar table\n", interface);
/* Clear the calendar table after BIST to fix parity errors */
for (index=0; index<32; index++)
{
cvmx_srxx_spi4_calx_t srxx_spi4_calx;
cvmx_stxx_spi4_calx_t stxx_spi4_calx;
srxx_spi4_calx.u64 = 0;
srxx_spi4_calx.s.oddpar = 1;
cvmx_write_csr(CVMX_SRXX_SPI4_CALX(index, interface), srxx_spi4_calx.u64);
stxx_spi4_calx.u64 = 0;
stxx_spi4_calx.s.oddpar = 1;
cvmx_write_csr(CVMX_STXX_SPI4_CALX(index, interface), stxx_spi4_calx.u64);
}
/* Re enable reporting of error interrupts */
cvmx_write_csr(CVMX_SPXX_INT_REG(interface), cvmx_read_csr(CVMX_SPXX_INT_REG(interface)));
cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), spxx_int_msk.u64);
cvmx_write_csr(CVMX_STXX_INT_REG(interface), cvmx_read_csr(CVMX_STXX_INT_REG(interface)));
cvmx_write_csr(CVMX_STXX_INT_MSK(interface), stxx_int_msk.u64);
// Setup the CLKDLY right in the middle
spxx_clk_ctl.u64 = 0;
spxx_clk_ctl.s.seetrn = 0;
spxx_clk_ctl.s.clkdly = 0x10;
spxx_clk_ctl.s.runbist = 0;
spxx_clk_ctl.s.statdrv = 0;
spxx_clk_ctl.s.statrcv = 1; /* This should always be on the opposite edge as statdrv */
spxx_clk_ctl.s.sndtrn = 0;
spxx_clk_ctl.s.drptrn = 0;
spxx_clk_ctl.s.rcvtrn = 0;
spxx_clk_ctl.s.srxdlck = 0;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
cvmx_wait (100 * MS);
// Reset SRX0 DLL
spxx_clk_ctl.s.srxdlck = 1;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
// Waiting for Inf0 Spi4 RX DLL to lock
cvmx_wait (100 * MS);
// Enable dynamic alignment
spxx_trn4_ctl.s.trntest = 0;
spxx_trn4_ctl.s.jitter = 1;
spxx_trn4_ctl.s.clr_boot = 1;
spxx_trn4_ctl.s.set_boot = 0;
if (OCTEON_IS_MODEL(OCTEON_CN58XX))
spxx_trn4_ctl.s.maxdist = 3;
else
spxx_trn4_ctl.s.maxdist = 8;
spxx_trn4_ctl.s.macro_en = 1;
spxx_trn4_ctl.s.mux_en = 1;
cvmx_write_csr (CVMX_SPXX_TRN4_CTL(interface), spxx_trn4_ctl.u64);
spxx_dbg_deskew_ctl.u64 = 0;
cvmx_write_csr (CVMX_SPXX_DBG_DESKEW_CTL(interface), spxx_dbg_deskew_ctl.u64);
return 0;
}
/**
* Callback to setup calendar and miscellaneous settings before clock detection
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @param num_ports Number of ports to configure on SPI
* @return Zero on success, non-zero error code on failure (will cause SPI initialization to abort)
*/
int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, int num_ports)
{
int port;
int index;
if (mode & CVMX_SPI_MODE_RX_HALFPLEX)
{
cvmx_srxx_com_ctl_t srxx_com_ctl;
cvmx_srxx_spi4_stat_t srxx_spi4_stat;
// SRX0 number of Ports
srxx_com_ctl.u64 = 0;
srxx_com_ctl.s.prts = num_ports - 1;
srxx_com_ctl.s.st_en = 0;
srxx_com_ctl.s.inf_en = 0;
cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64);
// SRX0 Calendar Table. This round robbins through all ports
port = 0;
index = 0;
while (port < num_ports)
{
cvmx_srxx_spi4_calx_t srxx_spi4_calx;
srxx_spi4_calx.u64 = 0;
srxx_spi4_calx.s.prt0 = port++;
srxx_spi4_calx.s.prt1 = port++;
srxx_spi4_calx.s.prt2 = port++;
srxx_spi4_calx.s.prt3 = port++;
srxx_spi4_calx.s.oddpar = ~(cvmx_dpop(srxx_spi4_calx.u64) & 1);
cvmx_write_csr(CVMX_SRXX_SPI4_CALX(index, interface), srxx_spi4_calx.u64);
index++;
}
srxx_spi4_stat.u64 = 0;
srxx_spi4_stat.s.len = num_ports;
srxx_spi4_stat.s.m = 1;
cvmx_write_csr(CVMX_SRXX_SPI4_STAT(interface), srxx_spi4_stat.u64);
}
if (mode & CVMX_SPI_MODE_TX_HALFPLEX)
{
cvmx_stxx_arb_ctl_t stxx_arb_ctl;
cvmx_gmxx_tx_spi_max_t gmxx_tx_spi_max;
cvmx_gmxx_tx_spi_thresh_t gmxx_tx_spi_thresh;
cvmx_gmxx_tx_spi_ctl_t gmxx_tx_spi_ctl;
cvmx_stxx_spi4_stat_t stxx_spi4_stat;
cvmx_stxx_spi4_dat_t stxx_spi4_dat;
// STX0 Config
stxx_arb_ctl.u64 = 0;
stxx_arb_ctl.s.igntpa = 0;
stxx_arb_ctl.s.mintrn = 0;
cvmx_write_csr(CVMX_STXX_ARB_CTL(interface), stxx_arb_ctl.u64);
gmxx_tx_spi_max.u64 = 0;
gmxx_tx_spi_max.s.max1 = 8;
gmxx_tx_spi_max.s.max2 = 4;
gmxx_tx_spi_max.s.slice = 0;
cvmx_write_csr(CVMX_GMXX_TX_SPI_MAX(interface), gmxx_tx_spi_max.u64);
gmxx_tx_spi_thresh.u64 = 0;
gmxx_tx_spi_thresh.s.thresh = 4;
cvmx_write_csr(CVMX_GMXX_TX_SPI_THRESH(interface), gmxx_tx_spi_thresh.u64);
gmxx_tx_spi_ctl.u64 = 0;
gmxx_tx_spi_ctl.s.tpa_clr = 0;
gmxx_tx_spi_ctl.s.cont_pkt = 0;
cvmx_write_csr(CVMX_GMXX_TX_SPI_CTL(interface), gmxx_tx_spi_ctl.u64);
// STX0 Training Control
stxx_spi4_dat.u64 = 0;
stxx_spi4_dat.s.alpha = 32; /*Minimum needed by dynamic alignment*/
stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20*/
cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface), stxx_spi4_dat.u64);
// STX0 Calendar Table. This round robbins through all ports
port = 0;
index = 0;
while (port < num_ports)
{
cvmx_stxx_spi4_calx_t stxx_spi4_calx;
stxx_spi4_calx.u64 = 0;
stxx_spi4_calx.s.prt0 = port++;
stxx_spi4_calx.s.prt1 = port++;
stxx_spi4_calx.s.prt2 = port++;
stxx_spi4_calx.s.prt3 = port++;
stxx_spi4_calx.s.oddpar = ~(cvmx_dpop(stxx_spi4_calx.u64) & 1);
cvmx_write_csr(CVMX_STXX_SPI4_CALX(index, interface), stxx_spi4_calx.u64);
index++;
}
stxx_spi4_stat.u64 = 0;
stxx_spi4_stat.s.len = num_ports;
stxx_spi4_stat.s.m = 1;
cvmx_write_csr(CVMX_STXX_SPI4_STAT(interface), stxx_spi4_stat.u64);
}
return 0;
}
/**
* Callback to perform clock detection
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @param timeout Timeout to wait for clock synchronization in seconds
* @return Zero on success, non-zero error code on failure (will cause SPI initialization to abort)
*/
int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout)
{
int clock_transitions;
cvmx_spxx_clk_stat_t stat;
uint64_t timeout_time;
uint64_t MS = cvmx_clock_get_rate(CVMX_CLOCK_CORE) / 1000;
/* Regardless of operating mode, both Tx and Rx clocks must be present
for the SPI interface to operate. */
cvmx_dprintf ("SPI%d: Waiting to see TsClk...\n", interface);
timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout;
/* Require 100 clock transitions in order to avoid any noise in the
beginning */
clock_transitions = 100;
do
{
stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface));
if (stat.s.s4clk0 && stat.s.s4clk1 && clock_transitions)
{
/* We've seen a clock transition, so decrement the number we still
need */
clock_transitions--;
cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64);
stat.s.s4clk0 = 0;
stat.s.s4clk1 = 0;
}
if (cvmx_get_cycle() > timeout_time)
{
cvmx_dprintf ("SPI%d: Timeout\n", interface);
return -1;
}
} while (stat.s.s4clk0 == 0 || stat.s.s4clk1 == 0);
cvmx_dprintf ("SPI%d: Waiting to see RsClk...\n", interface);
timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout;
/* Require 100 clock transitions in order to avoid any noise in the
beginning */
clock_transitions = 100;
do
{
stat.u64 = cvmx_read_csr (CVMX_SPXX_CLK_STAT(interface));
if (stat.s.d4clk0 && stat.s.d4clk1 && clock_transitions)
{
/* We've seen a clock transition, so decrement the number we still
need */
clock_transitions--;
cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64);
stat.s.d4clk0 = 0;
stat.s.d4clk1 = 0;
}
if (cvmx_get_cycle() > timeout_time)
{
cvmx_dprintf ("SPI%d: Timeout\n", interface);
return -1;
}
} while (stat.s.d4clk0 == 0 || stat.s.d4clk1 == 0);
return 0;
}
/**
* Callback to perform link training
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @param timeout Timeout to wait for link to be trained (in seconds)
* @return Zero on success, non-zero error code on failure (will cause SPI initialization to abort)
*/
int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout)
{
cvmx_spxx_trn4_ctl_t spxx_trn4_ctl;
cvmx_spxx_clk_stat_t stat;
uint64_t MS = cvmx_clock_get_rate(CVMX_CLOCK_CORE) / 1000;
uint64_t timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout;
int rx_training_needed;
// SRX0 & STX0 Inf0 Links are configured - begin training
cvmx_spxx_clk_ctl_t spxx_clk_ctl;
spxx_clk_ctl.u64 = 0;
spxx_clk_ctl.s.seetrn = 0;
spxx_clk_ctl.s.clkdly = 0x10;
spxx_clk_ctl.s.runbist = 0;
spxx_clk_ctl.s.statdrv = 0;
spxx_clk_ctl.s.statrcv = 1; /* This should always be on the opposite edge as statdrv */
spxx_clk_ctl.s.sndtrn = 1;
spxx_clk_ctl.s.drptrn = 1;
spxx_clk_ctl.s.rcvtrn = 1;
spxx_clk_ctl.s.srxdlck = 1;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
cvmx_wait (1000 * MS);
// SRX0 clear the boot bit
spxx_trn4_ctl.u64 = cvmx_read_csr(CVMX_SPXX_TRN4_CTL(interface));
spxx_trn4_ctl.s.clr_boot = 1;
cvmx_write_csr (CVMX_SPXX_TRN4_CTL(interface), spxx_trn4_ctl.u64);
// Wait for the training sequence to complete
cvmx_dprintf ("SPI%d: Waiting for training\n", interface);
cvmx_wait (1000 * MS);
#if !defined(OCTEON_VENDOR_LANNER)
timeout_time = cvmx_get_cycle() + 1000ull * MS * 600; /* Wait a really long time here */
#else
timeout_time = cvmx_get_cycle() + 1000ull * MS * 10;
#endif
/* The HRM says we must wait for 34 + 16 * MAXDIST training sequences.
We'll be pessimistic and wait for a lot more */
rx_training_needed = 500;
do {
stat.u64 = cvmx_read_csr (CVMX_SPXX_CLK_STAT(interface));
if (stat.s.srxtrn && rx_training_needed)
{
rx_training_needed--;
cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64);
stat.s.srxtrn = 0;
}
if (cvmx_get_cycle() > timeout_time)
{
cvmx_dprintf ("SPI%d: Timeout\n", interface);
return -1;
}
} while (stat.s.srxtrn == 0);
return 0;
}
/**
* Callback to perform calendar data synchronization
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @param timeout Timeout to wait for calendar data in seconds
* @return Zero on success, non-zero error code on failure (will cause SPI initialization to abort)
*/
int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout)
{
uint64_t MS = cvmx_clock_get_rate(CVMX_CLOCK_CORE) / 1000;
if (mode & CVMX_SPI_MODE_RX_HALFPLEX) {
// SRX0 interface should be good, send calendar data
cvmx_srxx_com_ctl_t srxx_com_ctl;
cvmx_dprintf ("SPI%d: Rx is synchronized, start sending calendar data\n", interface);
srxx_com_ctl.u64 = cvmx_read_csr(CVMX_SRXX_COM_CTL(interface));
srxx_com_ctl.s.inf_en = 1;
srxx_com_ctl.s.st_en = 1;
cvmx_write_csr (CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64);
}
if (mode & CVMX_SPI_MODE_TX_HALFPLEX) {
// STX0 has achieved sync
// The corespondant board should be sending calendar data
// Enable the STX0 STAT receiver.
cvmx_spxx_clk_stat_t stat;
uint64_t timeout_time;
cvmx_stxx_com_ctl_t stxx_com_ctl;
stxx_com_ctl.u64 = 0;
stxx_com_ctl.s.st_en = 1;
cvmx_write_csr (CVMX_STXX_COM_CTL(interface), stxx_com_ctl.u64);
// Waiting for calendar sync on STX0 STAT
cvmx_dprintf ("SPI%d: Waiting to sync on STX[%d] STAT\n", interface, interface);
timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout;
// SPX0_CLK_STAT - SPX0_CLK_STAT[STXCAL] should be 1 (bit10)
do {
stat.u64 = cvmx_read_csr (CVMX_SPXX_CLK_STAT (interface));
if (cvmx_get_cycle() > timeout_time)
{
cvmx_dprintf ("SPI%d: Timeout\n", interface);
return -1;
}
} while (stat.s.stxcal == 0);
}
return 0;
}
/**
* Callback to handle interface up
*
* @param interface The identifier of the packet interface to configure and
* use as a SPI interface.
* @param mode The operating mode for the SPI interface. The interface
* can operate as a full duplex (both Tx and Rx data paths
* active) or as a halfplex (either the Tx data path is
* active or the Rx data path is active, but not both).
* @return Zero on success, non-zero error code on failure (will cause SPI initialization to abort)
*/
int cvmx_spi_interface_up_cb(int interface, cvmx_spi_mode_t mode)
{
cvmx_gmxx_rxx_frm_min_t gmxx_rxx_frm_min;
cvmx_gmxx_rxx_frm_max_t gmxx_rxx_frm_max;
cvmx_gmxx_rxx_jabber_t gmxx_rxx_jabber;
if (mode & CVMX_SPI_MODE_RX_HALFPLEX) {
cvmx_srxx_com_ctl_t srxx_com_ctl;
srxx_com_ctl.u64 = cvmx_read_csr(CVMX_SRXX_COM_CTL(interface));
srxx_com_ctl.s.inf_en = 1;
cvmx_write_csr (CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64);
cvmx_dprintf ("SPI%d: Rx is now up\n", interface);
}
if (mode & CVMX_SPI_MODE_TX_HALFPLEX) {
cvmx_stxx_com_ctl_t stxx_com_ctl;
stxx_com_ctl.u64 = cvmx_read_csr(CVMX_STXX_COM_CTL(interface));
stxx_com_ctl.s.inf_en = 1;
cvmx_write_csr (CVMX_STXX_COM_CTL(interface), stxx_com_ctl.u64);
cvmx_dprintf ("SPI%d: Tx is now up\n", interface);
}
gmxx_rxx_frm_min.u64 = 0;
gmxx_rxx_frm_min.s.len = 64;
cvmx_write_csr(CVMX_GMXX_RXX_FRM_MIN(0,interface), gmxx_rxx_frm_min.u64);
gmxx_rxx_frm_max.u64 = 0;
gmxx_rxx_frm_max.s.len = 64*1024 - 4;
cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(0,interface), gmxx_rxx_frm_max.u64);
gmxx_rxx_jabber.u64 = 0;
gmxx_rxx_jabber.s.cnt = 64*1024 - 4;
cvmx_write_csr(CVMX_GMXX_RXX_JABBER(0,interface), gmxx_rxx_jabber.u64);
return 0;
}
|