path: root/sys/amd64/isa/ithread.c

/*-
 * Copyright (c) 1997 Berkeley Software Design, Inc. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Berkeley Software Design Inc's name may not be used to endorse or
 *    promote products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY BERKELEY SOFTWARE DESIGN INC ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL BERKELEY SOFTWARE DESIGN INC BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	From BSDI: intr.c,v 1.6.2.5 1999/07/06 19:16:52 cp Exp
 * $FreeBSD$
 */

/* Interrupt thread code. */

#include "opt_auto_eoi.h"

#include "isa.h"

#include <sys/param.h>
#include <sys/rtprio.h>			/* change this name XXX */
#ifndef SMP
#include <machine/lock.h>
#endif
#include <sys/proc.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/unistd.h>
#include <sys/errno.h>
#include <sys/interrupt.h>
#include <machine/ipl.h>
#include <machine/md_var.h>
#include <machine/segments.h>
#include <sys/bus.h>

#if defined(APIC_IO)
#include <machine/smp.h>
#include <machine/smptests.h>			/** FAST_HI */
#include <machine/resource.h>
#endif /* APIC_IO */
#ifdef PC98
#include <pc98/pc98/pc98.h>
#include <pc98/pc98/pc98_machdep.h>
#include <pc98/pc98/epsonio.h>
#else
#include <i386/isa/isa.h>
#endif
#include <i386/isa/icu.h>

#if NISA > 0
#include <isa/isavar.h>
#endif
#include <i386/isa/intr_machdep.h>
#include <sys/interrupt.h>
#ifdef APIC_IO
#include <machine/clock.h>
#endif

#include "mca.h"
#if NMCA > 0
#include <i386/isa/mca_machdep.h>
#endif

#include <sys/vmmeter.h>
#include <machine/mutex.h>
#include <sys/ktr.h>
#include <machine/cpu.h>
#if 0
#include <ddb/ddb.h>
#endif

u_long softintrcnt [NSWI];

SYSINIT(start_softintr, SI_SUB_SOFTINTR, SI_ORDER_FIRST, start_softintr, NULL)

/*
 * Schedule a heavyweight interrupt process.  This function is called
 * from the interrupt handlers Xintr<num>.
 */
void
sched_ithd(void *cookie)
{
	int irq = (int) cookie;		/* IRQ we're handling */
	ithd *ir = ithds[irq];		/* and the process that does it */

	/* This used to be in icu_vector.s */
	/*
	 * We count software interrupts when we process them.  The
	 * code here follows previous practice, but there's an
	 * argument for counting hardware interrupts when they're
	 * processed too.
	 */
	if (irq < NHWI)			/* real interrupt, */
		atomic_add_long(intr_countp[irq], 1); /* one more for this IRQ */
	atomic_add_int(&cnt.v_intr, 1); /* one more global interrupt */

	CTR3(KTR_INTR, "sched_ithd pid %d(%s) need=%d",
		ir->it_proc->p_pid, ir->it_proc->p_comm, ir->it_need);

#if 0
	/*
	 * If we are in the debugger, we can't use interrupt threads to
	 * process interrupts since the threads are scheduled.  Instead,
	 * call the interrupt handlers directly.  This should be able to
	 * go away once we have light-weight interrupt handlers.
	 */
	if (db_active) {
		intrec	*ih;	/* and our interrupt handler chain */
#if 0
		membar_unlock(); /* push out "it_need=0" */
#endif
		for (ih = ir->it_ih; ih != NULL; ih = ih->next) {
			if ((ih->flags & INTR_MPSAFE) == 0)
				mtx_enter(&Giant, MTX_DEF);
			ih->handler(ih->argument);
			if ((ih->flags & INTR_MPSAFE) == 0)
				mtx_exit(&Giant, MTX_DEF);
		}

		INTREN (1 << ir->irq); /* reset the mask bit */
		return;
	}
#endif
		
	/*
	 * Set it_need so that if the thread is already running but close
	 * to done, it will do another go-round.  Then get the sched lock
	 * and see if the thread is on whichkqs yet.  If not, put it on
	 * there.  In any case, kick everyone so that if the new thread
	 * is higher priority than their current thread, it gets run now.
	 */
	ir->it_need = 1;
	mtx_enter(&sched_lock, MTX_SPIN);
	if (ir->it_proc->p_stat == SWAIT) { /* not on run queue */
		CTR1(KTR_INTR, "sched_ithd: setrunqueue %d",
			ir->it_proc->p_pid);
/*		membar_lock(); */
		ir->it_proc->p_stat = SRUN;
		setrunqueue(ir->it_proc);
		aston();
	}
	else {
if (irq < NHWI && (irq & 7) != 0)
		CTR3(KTR_INTR, "sched_ithd %d: it_need %d, state %d",
			ir->it_proc->p_pid,
		        ir->it_need,
		        ir->it_proc->p_stat );
	}
	mtx_exit(&sched_lock, MTX_SPIN);
#if 0	
	aston();			/* ??? check priorities first? */
#else
	need_resched();
#endif
}

/*
 * This is the main code for all interrupt threads.  It gets put on
 * whichkqs by setrunqueue above.
 */
void
ithd_loop(void *dummy)
{
	ithd *me;			/* our thread context */
	intrec *ih;			/* and our interrupt handler chain */

	me = curproc->p_ithd;		/* point to myself */

	/*
	 * As long as we have interrupts outstanding, go through the
	 * list of handlers, giving each one a go at it.
	 */
	for (;;) {
		CTR3(KTR_INTR, "ithd_loop pid %d(%s) need=%d",
		     me->it_proc->p_pid, me->it_proc->p_comm, me->it_need);
		while (me->it_need) {
			/*
			 * Service interrupts.  If another interrupt
			 * arrives while we are running, they will set
			 * it_need to denote that we should make
			 * another pass.
			 */
			me->it_need = 0;
#if 0
			membar_unlock(); /* push out "it_need=0" */
#endif
			for (ih = me->it_ih; ih != NULL; ih = ih->next) {
				CTR5(KTR_INTR,
				    "ithd_loop pid %d ih=%p: %p(%p) flg=%x",
				    me->it_proc->p_pid, (void *)ih,
				    (void *)ih->handler, ih->argument,
				    ih->flags);

				if ((ih->flags & INTR_MPSAFE) == 0)
					mtx_enter(&Giant, MTX_DEF);
				ih->handler(ih->argument);
				if ((ih->flags & INTR_MPSAFE) == 0)
					mtx_exit(&Giant, MTX_DEF);
			}
		}

		/*
		 * Processed all our interrupts.  Now get the sched
		 * lock.  This may take a while and it_need may get
		 * set again, so we have to check it again.
		 */
		mtx_enter(&sched_lock, MTX_SPIN);
		if (!me->it_need) {

			INTREN (1 << me->irq); /* reset the mask bit */
			me->it_proc->p_stat = SWAIT; /* we're idle */
#ifdef APIC_IO
			CTR1(KTR_INTR, "ithd_loop pid %d: done",
				me->it_proc->p_pid);
#else
			CTR2(KTR_INTR, "ithd_loop pid %d: done, imen=%x",
				me->it_proc->p_pid, imen);
#endif
			mi_switch();
			CTR1(KTR_INTR, "ithd_loop pid %d: resumed",
				me->it_proc->p_pid);
		}
		mtx_exit(&sched_lock, MTX_SPIN);
	}
}

/*
 * Start soft interrupt thread.
 */
void
start_softintr(void *dummy)
{
	int error;
	struct proc *p;
	ithd *softintr;			/* descriptor for the "IRQ" */
	intrec *idesc;			/* descriptor for this handler */
	char *name = "sintr";		/* name for idesc */
	int i;

	if (ithds[SOFTINTR]) {		/* we already have a thread */
		printf("start_softintr: already running");
		return;
	}
	/* first handler for this irq. */
	softintr = malloc(sizeof (struct ithd), M_DEVBUF, M_WAITOK);
	if (softintr == NULL)
		panic ("Can't create soft interrupt thread");
	bzero(softintr, sizeof(struct ithd));
	softintr->irq = SOFTINTR;
	ithds[SOFTINTR] = softintr;
	error = kthread_create(intr_soft, NULL, &p,
		RFSTOPPED | RFHIGHPID, "softinterrupt");
	if (error)
		panic("start_softintr: kthread_create error %d\n", error);

	p->p_rtprio.type = RTP_PRIO_ITHREAD;
	p->p_rtprio.prio = PI_SOFT;	/* soft interrupt */
	p->p_stat = SWAIT;		/* we're idle */

	/* Put in linkages. */
	softintr->it_proc = p;
	p->p_ithd = softintr;		/* reverse link */

	idesc = malloc(sizeof (struct intrec), M_DEVBUF, M_WAITOK);
	if (idesc == NULL)
		panic ("Can't create soft interrupt thread");
	bzero(idesc, sizeof (struct intrec));

	idesc->ithd = softintr;
	idesc->name = malloc(strlen(name) + 1, M_DEVBUF, M_WAITOK);
	if (idesc->name == NULL)
		panic ("Can't create soft interrupt thread");
	strcpy(idesc->name, name);
	for (i = NHWI; i < NHWI + NSWI; i++)
		intr_countp[i] = &softintrcnt [i - NHWI];
}

/*
 * Software interrupt process code.
 */
void
intr_soft(void *dummy)
{
	int i;
	ithd *me;			/* our thread context */

	me = curproc->p_ithd;		/* point to myself */

	/* Main loop */
	for (;;) {
#if 0
		CTR3(KTR_INTR, "intr_soft pid %d(%s) need=%d",
		    me->it_proc->p_pid, me->it_proc->p_comm,
		     me->it_need);
#endif

		/*
		 * Service interrupts.  If another interrupt arrives
		 * while we are running, they will set it_need to
		 * denote that we should make another pass.
		 */
		me->it_need = 0;
		while ((i = ffs(spending))) {
			i--;
			atomic_add_long(intr_countp[i], 1);
			spending &= ~ (1 << i);
			mtx_enter(&Giant, MTX_DEF);
			if (ihandlers[i] == swi_generic)
				swi_dispatcher(i);
			else
				(ihandlers[i])();
			mtx_exit(&Giant, MTX_DEF);
		}
		/*
		 * Processed all our interrupts.  Now get the sched
		 * lock.  This may take a while and it_need may get
		 * set again, so we have to check it again.
		 */
		mtx_enter(&sched_lock, MTX_SPIN);
		if (!me->it_need) {
#if 0
			CTR1(KTR_INTR, "intr_soft pid %d: done",
			    me->it_proc->p_pid);
#endif
			me->it_proc->p_stat = SWAIT; /* we're idle */
			mi_switch();
#if 0
			CTR1(KTR_INTR, "intr_soft pid %d: resumed",
			    me->it_proc->p_pid);
#endif
		}
		mtx_exit(&sched_lock, MTX_SPIN);
	}
}