path: root/share/man/man4/wi.4

.\" Copyright (c) 1997, 1998, 1999
.\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by Bill Paul.
.\" 4. Neither the name of the author nor the names of any co-contributors
.\"    may be used to endorse or promote products derived from this software
.\"   without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"	$OpenBSD: wi.4tbl,v 1.14 2002/04/29 19:53:50 jsyn Exp $
.\"
.Dd April 13, 2008
.Dt WI 4
.Os
.Sh NAME
.Nm wi
.Nd "Lucent Hermes, and Intersil PRISM IEEE 802.11 driver"
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device wi"
.Cd "device wlan"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
if_wi_load="YES"
.Ed
.Sh DESCRIPTION
The
.Nm
driver provides support for 802.11b wireless network adapters based around
the Lucent Hermes, Intersil PRISM-II, Intersil PRISM-2.5, and Intersil
Prism-3 chipsets.
All chipsets provide a similar interface to the driver.
Only the Intersil chipsets support access point operation.
Functionality, such as WPA support, depends on the specific version
of the firmware used.
All host/device interaction is via programmed I/O, even on those cards
that support a DMA interface.
.Pp
For more information on configuring this device, see
.Xr ifconfig 8 .
.Pp
.Nm
supports
.Cm station ,
.Cm adhoc ,
.Cm adhoc-demo ,
.Cm hostap ,
and
.Cm monitor
mode operation.
Only one
virtual interface may be configured at a time.
For more information on configuring this device, see
.Xr ifconfig 8 .
.Pp
Cards supported by the
.Nm
driver come in a variety of packages, though the most common
are of the PCMCIA type.
In many cases, the PCI version of a wireless card is simply
a PCMCIA card bundled with a PCI adapter.
The PCI adapters come in two flavors: true PCMCIA bridges and
dumb PCMCIA bridges.
A true PCMCIA bridge (such as those sold by Lucent) will attach
as a real PCMCIA controller.
The wireless card will then attach to the PCMCIA bus.
Wireless cards in PCMCIA slots may be inserted and ejected on the fly.
.Pp
A dumb bridge, on the other hand, does not show up as a true PCMCIA bus.
The wireless card will simply appear to the host as a normal PCI
device and will not require any PCMCIA support.
Cards in this type of adapter should only be removed when the
machine is powered down.
.Pp
The following cards are among those supported by the
.Nm
driver:
.Pp
.Bl -column -compact "Linksys Instant Wireless WPC11 2.5" "Spectrum24" "PCI or PCMCIA"
.Em "Card	Chip	Bus"
3Com AirConnect 3CRWE777A	Prism-II	PCI
Accton airDirect WN3301		PCMCIA
ACTIONTEC HWC01170	Prism-2.5	PCMCIA
Adaptech ANW-8030	Prism-3	PCMCIA
Addtron AWP-100	Prism-II	PCMCIA
Adtec Adlink/340C	Prism-II	PCMCIA
Airvast WN 100	Prism-3	PCMCIA
Airway 802.11 Adapter		PCMCIA
Agere Orinoco	Hermes	PCMCIA
Allied Telesis WR211PCM	Prism-II	PCMCIA
ArTem OnAir	Prism?	PCMCIA
Asus WL100	Prism-2.5	PCMCIA
Avaya Wireless	Prism-II	PCMCIA
Bay eMobility 11B	Prism-2.5?	PCMCIA
Blue Concentric Circle WL-379F	Prism-II	CF
BreezeNet Wireless	Prism-II	PCMCIA
Buffalo WLI-PCM-S11	Prism-II	PCMCIA
Buffalo WLI-PCM-L11G	Hermes	PCMCIA
Buffalo WLI-CF-S11G	Prism-II	CF
Buffalo WLI2-CF-S11G	Prism 2.5	CF
Cabletron RoamAbout	Hermes	PCMCIA
Compaq Agency NC5004	Prism-II	PCMCIA
Compaq WL100	Prism-II	PCMCIA
Compaq WL110	Hermes	PCMCIA
Compaq WL200	Prism-II	PCMCIA
Contec FLEXLAN/FX-DS110-PCC	Prism-II	PCMCIA
Corega PCC-11	Prism-II	PCMCIA
Corega PCCA-11	Prism-II	PCMCIA
Corega PCCB-11	Prism-II	PCMCIA
Corega CGWLPCIA11	Prism-II	PCI
Dell TrueMobile 1150	Hermes	PCMCIA
Dlink Air 660	Prism-II	PCMCIA
Dlink DWL520	Prism-2.5	PCI
Dlink DWL650	Prism-2.5	PCMCIA
ELECOM Air@Hawk/LD-WL11/PCC		PCMCIA
ELSA MC-11		PCMCIA
ELSA XI300	Prism-II	PCMCIA
ELSA XI800	Prism-II	CF
EMTAC A2424i	Prism-II	PCMCIA
Farallon Skyline	Prism-II	PCMCIA
Gemtek WL-311	Prism-2.5	PCMCIA
Hawking Technology WE110P	Prism-2.5	PCMCIA
Home Wireless Networks	Prism-II	PCMCIA
IBM High Rate Wireless	Hermes	PCMCIA
ICOM SL-1100	Prism-II	PCMCIA
I-O DATA WN-B11/PCM	Prism-II	PCMCIA
Intersil Prism II	Prism-II	PCMCIA
Intersil Mini-PCI	Prism-2.5	PCI
Intersil ISL37100P	Prism-3	PCMCIA
Intersil ISL37110P	Prism-3	PCMCIA
Intersil ISL37300P	Prism-3	PCMCIA
Laneed Wireless		PCMCIA
Linksys Instant Wireless WPC11	Prism-II	PCMCIA
Linksys Instant Wireless WPC11 2.5	Prism-2.5	PCMCIA
Linksys Instant Wireless WPC11 3.0	Prism-3	PCMCIA
Linksys WCF11	Prism-3	PCMCIA
Linksys WCF12	Prism-3	CF
Lucent WaveLAN	Hermes	PCMCIA
Melco Airconnect	Prism-II	PCMCIA
Microsoft MN-520 WLAN	Prism-II	PCMCIA
NANOSPEED ROOT-RZ2000	Prism-II	PCMCIA
NCR WaveLAN/IEEE 802.11		PCMCIA
NDC/Sohoware NCP130	Prism-II	PCI
NEC CMZ-RT-WP	Prism-II	PCMCIA
NEC PK-WL001	Lucent	PCMCIA
NEC PC-WL/11C	Prism-II	PCMCIA
Netgear MA311	Prism-2.5	PCI
Netgear MA401	Prism-II/2.5	PCMCIA
Netgear MA401RA	Prism-II	PCMCIA
Netgear MA701	Prism-II	CF
NOKIA C020 WLAN	Prism-II	PCMCIA
NOKIA C110 WLAN	Prism-2.5	PCMCIA
NTT-ME 11Mbps Wireless LAN	Prism-II	PCMCIA
Planex GeoWave/GW-NS110	Prism-II	PCMCIA
Planex GW-NS11H	Prism-II	PCMCIA
Proxim Harmony	Prism-II	PCMCIA
Proxim RangeLAN-DS	Prism-II	PCMCIA
Samsung MagicLAN SWL-2000N	Prism-II	PCMCIA
SENAO SL-2511CD	Prism-3	PCMCIA
Siemens SpeedStream SS1021	Prism-II	PCMCIA
Siemens SpeedStream SS1021	Prism-3	PCMCIA
SMC 2532W-B	Prism-II	PCMCIA
SMC 2602 EZ Connect (3.3V)	Prism-II	PCI or PCMCIA
SMC 2632 EZ Connect	Prism-II	PCMCIA
Socket Low Power WLAN-CF	Prism-II	CF
Sony PCWA-C100	Lucent	PCMCIA
Sony PEGA-WL110	Prism-2.5	PCMCIA
TDK LAK-CD011WL	Prism-II	PCMCIA
Toshiba Wireless LAN Card	Prism-II	PCMCIA
U.S.\& Robotics Wireless Card 2410	Prism-II	PCMCIA
YIS YWL-11B	Prism-II	PCMCIA
.El
.Pp
Several vendors sell PCI adapters built around the PLX Technology 9050
or 9052 chip.
The following such adapters are supported or expected to work:
.Pp
.Bl -item -compact
.It
3Com AirConnect 3CRWE777A (3.3V)
.It
Belkin F5D6000 (a rebadged WL11000P)
.It
Eumitcom WL11000P
.It
Global Sun Technology GL24110P (untested)
.It
Global Sun Technology GL24110P02
.It
LinkSys WDT11 (a rebadged GL24110P02)
.It
Netgear MA301
.It
US Robotics 2415 (rebadged WL11000P)
.It
Wisecom Wireless LAN PCI Adapter
.El
.Pp
The following adapters have the same model numbers as those listed
above, but might not work if the actual card is after the change away
from the Prism family:
.Pp
.Bl -item -compact
.It
DLink DWL520
.El
.Sh EXAMPLES
Join an existing BSS network (ie: connect to an access point):
.Pp
.Bd -literal -offset indent
ifconfig wlan create wlandev wi0 inet 192.168.0.20 \e
    netmask 0xffffff00
.Ed
.Pp
Join a specific BSS network with network name
.Dq Li my_net :
.Pp
.Bd -literal -offset indent
ifconfig wlan create wlandev wi0 inet 192.168.0.20 \e
    netmask 0xffffff00 ssid my_net
.Pp
Join a specific BSS network with WEP encryption:
.Bd -literal -offset indent
ifconfig wlan create wlandev wi0 inet 192.168.0.20 \e
    netmask 0xffffff00 ssid my_net \e
    wepmode on wepkey 0x8736639624 weptxkey 1
.Ed
.Pp
Join a Lucent legacy demo ad-hoc network with network name
.Dq Li my_net :
.Bd -literal -offset indent
ifconfig wlan create wlandev wi0 wlanmode ahdemo \e
    inet 192.168.0.20 netmask 0xffffff00 ssid my_net
.Ed
.Pp
Join/create an IBSS network with network name
.Dq Li my_net :
.Bd -literal -offset indent
ifconfig wlan create wlandev wi0 wlanmode adhoc wi0 \e
    inet 192.168.0.22 netmask 0xffffff00 ssid my_net
.Ed
.Pp
Create a host-based access point (Prism only):
.Bd -literal -offset indent
ifconfig wlan create wlandev wi0 wlanmode hostap \e
    inet 192.168.0.10 netmask 0xffffff00 ssid my_ap
.Ed
.Pp
Create a host-based access point with WEP enabled (Prism only)
and plumb it into bridge to fxp0:
.Bd -literal -offset indent
ifconfig wlan0 create wlandev wi0 wlanmode hostap \e
    inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
    wepmode on wepkey 0x1234567890 weptxkey 1
ifconfig bridge0 create
ifconfig bridge0 addm wlan0 addm fxp0 up
.Ed
.Pp
This will give you the same functionality as an access point.
.Sh DIAGNOSTICS
.Bl -diag
.It "wi%d: init failed"
The WaveLAN card failed to become ready after an initialization command
was issued.
.It "wi%d: failed to allocate %d bytes on NIC"
The driver was unable to allocate memory for transmit frames in the
NIC's on-board RAM.
This can also be an indication of an incorrectly configured interrupt.
.It "wi%d: device timeout"
The WaveLAN card failed to generate an interrupt to acknowledge a transmit
command.
.El
.Sh SEE ALSO
.Xr intro 4 ,
.Xr pccard 4 ,
.Xr pccbb 4 ,
.Xr pcic 4 ,
.Xr wlan 4 ,
.Xr wlan_ccmp 4 ,
.Xr wlan_tkip 4 ,
.Xr wlan_wep 4 ,
.Xr wlan_xauth 4 ,
.Xr hostapd 8 ,
.Xr ifconfig 8 ,
.Xr wpa_supplicant 8 .
.Rs
.%T HCF Light programming specification
.%O http://www.wavelan.com
.Re
.Sh HISTORY
The
.Nm
device driver first appeared in
.Fx 3.0 .
.Sh AUTHORS
The original
.Nm
driver was written by
.An Bill Paul Aq wpaul@ctr.columbia.edu .
This man page comes from
.Ox .
.Sh CAVEATS
The driver will reject devices with old firmware to
avoid dealing with numerous defects.
Unfortunately the driver does not support downloading new firmware
to the card so if new firmware is needed users will have to boot
a different system to accomplish this.
.Pp
Intersil Prism cards must have firmware versions 0.8.0 or later and
version 1.7.0 or later are required to support functionality such as WPA.
Some users of Prism-II and 2.5 based cards report that station firmware
version 1.3.4 works better for them in hostap than 1.4.9.
Older versions of the Prism station firmware have a number of issues
with hostap mode.
The IBSS/adhoc mode appears to work well on station firmware 1.3.1 and
later.
The IBSS/adhoc mode appears to have problems for some people with
older versions of station firmware.
.Pp
Lucent cards prior to firmware version 6.0.6 do not implement IBSS
mode and are not supported.
.Pp
Prior versions of
.Nm 
supported Symbol firmware.
That support has been removed due to persistent problems with this
firmware as well as getting proper documentation on this firmware.
.Pp
Hermes 2 and Hermes 3 chips are not supported by this driver.
.Pp
Here's the above requirements in the form of a table
.Pp
.Bl -column -compact "Prims II/2.5" "xxxxxxxx" "xxxxxxxx" "xxxxxxxx" "xxxxxxxx"
.Em "Firmware	Minimum	WPA	Host AP	Adhoc/IBSS"
Prism II/2.5	0.8.0	1.7.0	1.3.4	1.3.1
Prism 3	0.8.0	1.7.0	1.4.9	1.3.1
Hermes	6.0.6	none	none	6.0.6
Symbol	none	none	none	none
.El
.Sh BUGS
Not all the new messages are documented here, and many of them are
indications of transient errors that are not indications of serious
problems.
.Pp
WL200 PCI wireless cards are based on a Cirrus Logic CL-PD6729 bridge
chips glued to an Intersil Prism-II PCMCIA chipset w/o the PC Card
form factor being present.
These chips are special and require special care to use properly.
One must set
.Va hw.pcic.pd6729_intr_path Ns = Ns Qq Li 2
in
.Pa /boot/loader.conf .
This tells the PC Card system to use PCI interrupts for this odd beast.
It is not possible to know automatically which kind of interrupts to use.
OLDCARD devices
support this device.
NEWCARD devices
.Xr ( pccbb 4
and
.Xr pccard 4 )
do not support it at this time.