path: root/release/doc/en_US.ISO8859-1/relnotes/article.sgml

<articleinfo>
  <title>&os;/&arch; &release.current; Release Notes</title>

  <corpauthor>The FreeBSD Project</corpauthor>

  <pubdate>$FreeBSD$</pubdate>

  <copyright>
    <year>2000</year>
    <year>2001</year>
    <year>2002</year>
    <holder role="mailto:doc@FreeBSD.org">The FreeBSD Documentation Project</holder>
  </copyright>

  <abstract>
    <para>The release notes for &os; &release.current; contain a summary
      of the changes made in the &os; base system since &release.prev;.
      Both changes for kernel and userland are listed, as well as
      applicable security advisories that were issued since the last
      release.  Some brief remarks on upgrading are also presented.</para>
  </abstract>
</articleinfo>

<sect1>
  <title>Introduction</title>

  <para>This document contains the release notes for &os;
    &release.current; on the &arch.print; hardware platform.  It
    describes new features of &os; that have been added (or changed)
    since &release.prev;.  It also provides some notes on upgrading
    from previous versions of &os;.</para>

<![ %release.type.snapshot [

  <para>The &release.type; distribution to which these release notes
    apply represents a point along the &release.branch; development
    branch between &release.prev; and the future &release.next;.  Some
    pre-built, binary &release.type; distributions along this branch
    can be found at <ulink url="&release.url;"></ulink>.</para>

]]>

<![ %release.type.release [

  <para>This distribution of &os; &release.current; is a
    &release.type; distribution.  It can be found at <ulink
    url="&release.url;"></ulink> or any of its mirrors.  More
    information on obtaining this (or other) &release.type;
    distributions of &os; can be found in the <ulink
    url="http://www.FreeBSD.org/handbook/mirrors.html"><quote>Obtaining
    FreeBSD</quote> appendix</ulink> to the <ulink
    url="http://www.FreeBSD.org/handbook/">FreeBSD
    Handbook</ulink>.</para>

]]>
</sect1>

<sect1>
  <title>What's New</title>

  <para>This section describes the most user-visible new or changed
    features in &os; since &release.prev;.  Typical release note items
    document new drivers or hardware support, new commands or options,
    major bugfixes, or contributed software upgrades.  Security
    advisories issued after &release.prev; are also listed.  In
    general, changes described here are unique to the &release.branch;
    branch unless specifically marked as &merged; features.</para>

  <para>Many additional changes were made to &os; that are not listed
    here for lack of space.  For example, documentation was corrected
    and improved, minor bugs were fixed, insecure coding practices
    were audited and corrected, and source code was cleaned up.</para>

  <sect2 id="kernel">
    <title>Kernel Changes</title>

    <para arch="i386">The &man.amdpm.4; driver has been added to
      provide access to the system monitoring functions of the AMD 756
      chipset. &merged;</para>

    <para>The &man.agp.4; driver for AGP devices has been
      added. &merged;</para>

    <para>A new &man.ddb.4; command <command>show pcpu</command> lists
      some of the per-CPU data.</para>

    <para>Two new &man.ddb.4; commands, <command>hwatch</command> and
      <command>dhwatch</command>, have been introduced.  Analogous to
      <command>watch</command> and <command>dwatch</command>, they
      install hardware watchpoints (as opposed to software
      watchpoints) if supported by the architecture. &merged;</para>

    <para>&man.devfs.5;, which allows entries in the
      <filename>/dev</filename> directory to be built automatically
      and supports more flexible attachment of devices, has been
      largely reworked.  &man.devfs.5; is now enabled by default and
      can be disabled by the <literal>NODEVFS</literal> kernel
      option.</para>

    <para>The dgm driver has been removed in favor of the digi driver.</para>

    <para>A new digi driver has been added to support PCI Xr-based and
      ISA Xem Digiboard cards.  A new &man.digictl.8; program is
      (mainly) used to re-initialize cards that have external port
      modules attached such as the PC/Xem.</para>

    <para>An &man.eaccess.2; system call has been added, similar to
      &man.access.2; except that the former uses effective credentials
      rather than real credentials.</para>

    <para arch="sparc64">Support has been added for EBus-based
      devices.</para>

    <para arch="i386">The &man.ichsmb.4; driver for the Intel 82801AA
      (ICH) SMBus controller and compatibles has been
      added. &merged;</para>

    <para>Each &man.jail.2; environment can now run under its own
      securelevel.</para>

    <para>The tunable sysctl variables for &man.jail.2; have moved
      from <varname>jail.*</varname> to the
      <varname>security.*</varname> hierarchy.  Other security-related
      sysctl variables have moved from <varname>kern.security.*</varname> to
      <varname>security.*</varname>.</para>

    <para>The <varname>kern.maxvnodes</varname> limit now properly
      limits the number of vnodes in use.  Previously only vnodes with
      no cached pages could be freed; this could allow the number of
      vnodes to grow without limit on large-memory machines accessing
      many small files.  A <literal>vnlru</literal> kernel thread
      helps to flush and reuse vnodes. &merged;</para>

    <para>The kernel message buffer is now accessible by the
      (machine-independent) <varname>kern.msgbuf</varname> sysctl
      variable; &man.dmesg.8; no longer needs to be SGID
      <groupname>kmem</groupname>. &merged;</para>

    <para>The &man.kqueue.2; event notification facility was added to
      the &os; kernel.  This is a new interface which is able to
      replace &man.poll.2;/&man.select.2;, offering improved
      performance, as well as the ability to report many different
      types of events.  Support for monitoring changes in sockets,
      pipes, fifos, and files are present, as well as for signals and
      processes. &merged;</para>

    <para arch="i386">A new <varname>KVA_SPACE</varname> kernel option
      can be used to reconfigure the size of the kernel virtual
      address space. &merged;</para>

    <para>The &man.labpc.4; driver has been removed due to
      <quote>bitrot</quote>.</para>

    <para>The loader and kernel linker now look for files named
      <filename>linker.hints</filename> in each directory with KLDs
      for a module name and version to KLD filename mapping.  The new
      &man.kldxref.8; utility is used to generate these files.</para>

    <para>Linux emulation now supports the kernel functionality
      required by the
      <filename role="package">emulators/linux_base-7</filename>
      (RedHat 7.X emulation) port. &merged;</para>

    <para>Linux emulation now requires <literal>options
      SYSVSEM</literal> in the kernel configuration. &merged;</para>

    <para>&man.lomac.4;, a Low-Watermark Mandatory Access Control
      security facility, has been added as a kernel module.  It
      provides a drop-in security mechanism in addition to the
      traditional UID-based security facilities, requiring no
      additional configuration from the administrator.  Work on this
      feature was sponsored by DARPA and NAI Labs.</para>

    <para>The <varname>maxusers</varname> kernel configuration
      parameter is now a boot-time tunable variable.  The kernel
      parameters derived from <varname>maxusers</varname> are now also
      tunables and can be overridden at boot-time.  The
      <varname>hz</varname> parameter is also now a
      tunable. &merged;</para>

    <para>Specifying a value of <literal>0</literal> for the
      <varname>maxusers</varname> kernel configuration parameter will
      now cause an appropriate value to be calculated at boot-time
      (between 32 and 384, depending on the amount of memory present).
      This value is now the default for all
      <filename>GENERIC</filename> kernels. &merged;</para>

    <para arch="alpha">A <varname>MAXMEM</varname> kernel option,
      along with the <varname>hw.physmem</varname> loader tunable, can
      be used to artificially reduce the memory size of a machine for
      testing (or other purposes). &merged;</para>

    <para>The kernel configuration parameters
      <varname>MAXTSIZ</varname>, <varname>DFLDSIZ</varname>,
      <varname>MAXDSIZ</varname>, <varname>DFLSSIZ</varname>,
      <varname>MAXSSIZ</varname>, and <varname>SGROWSIZ</varname> are
      all loader tunables (<varname>kern.maxtsiz</varname>,
      <varname>kern.maxdfldsiz</varname>, etc.). &merged;</para>

    <para>&man.mutex.9; profiling code has been added, enabled by the
      <literal>MUTEX_PROFILING</literal> kernel configuration option.
      It enables the <varname>debug.mutex.prof.*</varname> hierarchy
      of sysctl variables.</para>

    <para arch="i386">The <literal>NCPU</literal>, <literal>NAPIC</literal>,
      <literal>NBUS</literal>, and <literal>NINTR</literal> kernel
      configuration options, for configuring SMP kernels, have been
      removed.  <literal>NCPU</literal> is now set to a maximum of 16,
      and the other, aforementioned options are now
      dynamic. &merged;</para>

    <para>A &man.nmdm.4; null-modem terminal driver has been added.
      &merged;</para>

    <para>The <literal>O_DIRECT</literal> flag has been added to
      &man.open.2; and &man.fcntl.2;.  Specifying this flag for open
      files will attempt to minimize the cache effects of reading and
      writing. &merged;</para>

    <para>An &man.orm.4; device has been added to claim the option
      ROMs in the ISA memory I/O space, to prevent other drivers from
      mistakenly assigning addresses that conflict with these
      ROMs. &merged;</para>

    <para arch="i386">PECOFF (Win32 Execution file format) support has
      been added.</para>

    <para arch="i386">The pmc driver, which supports the power
      management controller of the NEC PC-98NOTE, has been
      added. &merged;</para>

    <para>POSIX.1b Shared Memory Objects are now supported.  The
      implementation uses regular files, but automatically enables the
      MAP_NOSYNC flag when they are &man.mmap.2;-ed. &merged;</para>

    <para>Replaced the <literal>PQ_*CACHE</literal> options with a
      single <literal>PQ_CACHESIZE</literal> option to be set to the
      cache size in kilobytes.  The old options are still supported
      for backwards compatibility. &merged;</para>

    <para arch="i386">The &man.puc.4; (PCI <quote>Universal</quote>
      Communications) driver has been added, to help connect PCI-based
      serial ports to the &man.sio.4; driver. &merged;</para>

    <para>The &man.random.4; device has been rewritten to use the
      <application>Yarrow</application> algorithm.  It harvests
      entropy from a variety of interrupt sources, including the
      console devices, Ethernet and point-to-point network interfaces,
      and mass-storage devices.  Entropy from the &man.random.4;
      device is now periodically saved to files in
      <filename>/var/db/entropy</filename>, as well as at shutdown
      time.  The semantics of <filename>/dev/random</filename> have
      changed; it never blocks waiting for entropy bits but generates
      a stream of pseudo-random data and now behaves exactly as
      <filename>/dev/urandom</filename>.</para>

    <para>A new kernel option, <literal>options REGRESSION</literal>,
      enables interfaces and functionality intended for use during
      correctness and regression testing.</para>

    <para arch="sparc64">Support has been added for SBus-based
      devices.</para>

    <para>The &man.snp.4; device is no longer static and can now be
      compiled as a module. &merged;</para>

    <para arch="i386">The &man.spic.4; driver, which provides access
      to the Jog Dial device on some Sony laptops, has been
      added.  &man.moused.8; support for this device has also been
      added. &merged;</para>

    <para>The &man.syscons.4; driver now supports keyboard-controlled
      pasting, by default bound to
      <keycap>Shift</keycap>-<keycap>Insert</keycap>.</para>

    <para>Support for USB devices was added to the
      <filename>GENERIC</filename> kernel and to the installation
      programs to support USB devices out of the box.  Note that SRM
      does not support USB devices at the moment, so you must still
      use an AT keyboard if you are not using a serial
      console. &merged;</para>

    <para arch="i386">The umodem driver for USB modems has been added.
      Support is provided for the 3Com 5605 and Metricom Ricochet GS
      wireless USB modems. &merged;</para>

    <para arch="i386">The &man.uscanner.4; driver for basic USB
      scanner support using SANE has been added. See <ulink
      url="http://www.mostang.com/sane/">the SANE home page</ulink>
      for supported scanners. The HP ScanJet 4100C, 5200C and 6300C
      are known to be working. &merged;</para>

    <para>The ucom device driver has been added, to support USB
      modems, serial devices, and other programs that need to look
      like a tty.  The related uplcom and uvscom drivers provide specific
      support for the Prolific PL-2303 serial adapter and the SUNTAC
      Slipper U VS-10U, respectively.</para>

    <para>To increase security, the <literal>UCONSOLE</literal> kernel
      configuration option has been removed.</para>

    <para arch="i386">The UserConfig boot-time kernel configuration
      feature, usually used to enable, disable, or configure ISA
      devices, has been removed.  Its functionality has been replaced
      by the kernel hints file in
      <filename>/boot/device.hints</filename>.</para>

    <para>The <literal>USER_LDT</literal> kernel option is now
      activated by default.</para>

    <para>A VESA S3 linear framebuffer driver has been added.</para>

    <para arch="i386">The &man.viapm.4; driver for VIA SMBus
      power management controllers has been added. &merged;</para>

    <!-- Above this line, sort kernel changes by manpage/keyword-->

    <para>Write combining for crashdumps has been implemented.  This
      feature is useful when write caching is disabled on both SCSI
      and IDE disks, where large memory dumps could take up to an hour
      to complete. &merged;</para>

    <para>Extremely large swap areas (&gt;67 GB) no longer panic the
      system.</para>

    <para arch="alpha">Support for threads under Linux emulation has
      been added.</para>

    <para>The <maketarget>buildkernel</maketarget> target now gets the
      name of the configuration(s) to build from the
      <varname>KERNCONF</varname> variable, not
      <varname>KERNEL</varname>.  It is no longer required, in some
      cases, for a <maketarget>buildworld</maketarget> to precede a
      <maketarget>buildkernel</maketarget>.  (The
      <maketarget>buildworld</maketarget> is still required when
      upgrading across major releases, across
      <application>binutil</application> updates and when
      &man.config.8; changes version.) &merged;</para>

    <para>The out-of-swap process termination code now begins killing
      processes earlier to avoid deadlocks; it now also takes into
      account the swap space used by processes when computing the
      process sizes. &merged;</para>

    <para>Linker sets are now self-contained; &man.gensetdefs.8; is
      unnecessary and has been removed.</para>

    <para>Network device cloning has been implemented, and the
      &man.gif.4; device has been modified to take advantage of it.
      Thus, instead of specifying how many &man.gif.4; interfaces are
      available in kernel configuration files, &man.ifconfig.8;'s
      <option>create</option> option should be used when another device
      instance is desired. &merged;</para>

    <para>It is now possible to hardwire kernel environment variables
      (such as tuneables) at compile-time using &man.config.8;'s
      <literal>ENV</literal> directive.</para>

    <para>Idle zeroing of pages can be enabled with the
      <varname>vm.idlezero_enable</varname> sysctl variable.</para>

    <para arch="i386">The load addresses of kernels are now exported
      to the symbol table and various hard-coded constants have been
      removed so that utilities such as &man.ps.1; can work with
      kernels compiled at different addresses. &merged;</para>

    <para>Coredumps of large processes (or of a large number of
      processes) no longer lock up the machine for long periods of
      time. &merged;</para>

    <para>The Kernel-Scheduled Entity project has made changes to the
      kernel scheduler to more efficiently handle multi-threaded
      programs.</para>

    <para>The kernel now has support for multiple low-level console
      devices.  The new &man.conscontrol.8; utility helps to manage
      the different consoles.</para>

    <para arch="alpha">The console driver has gained support for
      TGA-based display adapters.</para>

    <para>The kernel on the installation CDs is now separated from the
      <filename>mfsroot</filename> image.  This permits the use of a
      full kernel when installing from CD on machines that support CD
      booting (instead of the stripped-down kernel used on
      floppies). &merged;</para>

    <para>The system load average computation now adds some jitter to
      the timing of samples, in order to avoid synchronization with
      processes that run periodically. &merged;</para>

    <para>If a debugging kernel with modules is being built
      (i.e. using <literal>makeoptions DEBUG=-g</literal>), the
      modules will now be built with debugging support as well, for
      completeness.  A side effect of this change is that modules
      built and installed with debugging kernels will now occupy more
      space on disk than they did previously. &merged;</para>

    <para>The kernel dump device can now be set via the
      <varname>dumpdev</varname> loader tunable.  As a result, it is
      now possible to obtain crash dumps from panics during the late
      stages of kernel initialization (before the system enters into
      single-user mode). &merged;</para>

    <para>The kernel memory allocator is now a slab memory allocator,
      similar to that used in Solaris.  This is a SMP-safe memory
      allocator that has near-linear performance as the number of CPUs
      increases.  It also allows for reduced memory
      fragmentation.</para>

    <sect3>
      <title>Processor/Motherboard Support</title>

      <para>SMP support has been largely reworked, incorporating code
	from BSD/OS 5.0.  One of the main features of SMPng
	(<quote>SMP Next Generation</quote>) is to allow more
	processes to run in kernel, without the need for spin locks
	that can dramatically reduce the efficiency of multiple
	processors.  Interrupt handlers now have contexts associated
	with them that allow them to be blocked, which reduces the
	need to lock out interrupts.</para>

      <para arch="i386">Support for the 80386 processor has been
	removed from the <filename>GENERIC</filename> kernel, as this
	code seriously pessimizes performance on other IA32
	processors.
        The <literal>I386_CPU</literal> kernel option
	to support the 80386 processor is now mutually exclusive with
	support for other IA32 processors; this should slightly
	improve performance on the 80386 due to the elimination of
	runtime processor type checks.
        Custom kernels that will run on the 80386 can
	still be built by changing the cpu options in the kernel
	configuration file to only include
	<literal>I386_CPU</literal>.</para>

      <para arch="alpha">AlphaServer 1200 (<quote>Tincup</quote>) has
	been tested and works OK.  Currently it does not want to boot
	from CD or floppy but a transplanted disk that was installed
	on another Alpha works well. &merged;</para>

      <para arch="alpha">The API UP1100 mainboard has been verified to
	work.</para>

      <para arch="alpha">The API CS20 1U high server has been verified
	to work.</para>

      <para arch="alpha">The DEC3000 series support has been removed
	from the mfsroot floppy image so that it fits on a 1.44 Mbyte
	floppy again. As the DEC3000 is currently only usable diskless
	this should not cause any problems.</para>

      <para arch="alpha">Support for AlphaServer 2100A
	(<quote>Lynx</quote>) has been added.</para>

      <para arch="alpha">Kernel code has been added that allows older
	generation Alpha CPUs (EV4 and EV5) to emulate instructions of
	the newer Alpha CPU generations. This enables the use of
	binary-only programs like <application>Adobe Acrobat
	4</application> on EV4 and EV5.</para>

      <para arch="alpha">SMP support for the Alpha is now operational.</para>

      <para arch="i386">Detection for new processors, such as the
	FC-PGA2 Pentium III (Tualatin), Transmeta Crusoe, and
	Transmeta Crusoe LongRun, has been added. &merged;</para>

      <para arch="alpha">Support for the following hardware has been
	removed from the installation kernel to make it fit on a
	1.44MB floppy again: Multia, NoName, PC64, EB64, Aspen Alpine,
	sa (SCSI tape), amr, parallel port support, vx (3c590, 3c595),
	pcn (AMD Am79C97x PCI 10/100), sf (Adaptec AIC-6915), sis (SiS
	900/SiS 7016), ste (Sundance ST201 (D-Link DFE-550TX)), wb
	(Winbond W89C840F).</para>

      <para arch="i386">Support for Streaming <acronym>SIMD</acronym>
	Extensions (<acronym>SSE</acronym>) has been introduced.  The
	<literal>CPU_ENABLE_SSE</literal> kernel option controls
	whether support is compiled into the kernel. &merged;</para>

      <para arch="i386">The <literal>CPU_ATHLON_SSE_HACK</literal>
	kernel option has been added, which attempts to enable the SSE
	feature bit on newer Athlon CPUs if the BIOS has forgotten to
	enable it.</para>

      <para arch="sparc64">The UltraSPARC platform is now supported by
	&os;.  The following machines are supported to at least some
	degree:  Ultra 1/2/5/10/30/60, Enterprise 220R/420R, Netra T1 AC200/DC200, Netra T 105, and Blade
	100.  SMP is supported, and has been tested on the
	Ultra 2, Ultra 60, Enterprise 220R, and 
	Enterprise 420R.</para>

    </sect3>

    <sect3>
      <title>Bootloader Changes</title>

      <para arch="i386"><filename>boot2</filename> now supports a
	<option>-n</option> option to disallow boot interruption by
	keypresses. &merged;</para>

      <para arch="i386">A new <filename>cdboot</filename> bootstrap
	utility for CDROMs provides better compatability with some
	BIOS implementations that do not completely implement the El
	Torito bootable CDROM standard.  This boot loader supports
	<quote>no emulation</quote> mode booting, thus eliminating the
	need for an emulated floppy disk image on a bootable
	CDROM. &merged;</para>

      <para arch="i386">The i386 boot loader now has support for a
	<literal>nullconsole</literal> console type, for use on
	systems with neither a video console nor a serial
	port. &merged;</para>

      <para arch="i386">The &man.loader.8; now has optional support
	(enabled at compile-time, off by default) for loading
	<application>bzip2</application>-compressed kernels and
	modules. &merged;</para>

      <para arch="i386">Support for Intel's Wired for Management 2.0
	(PXE) was added to the &os; boot loader.  Due to API
	differences, the older PXE versions are not supported.  This
	allow network booting using DHCP. &merged;</para>

      <!-- Above this line, order bootloader changes by keyword-->

      <para arch="i386">The &os; boot loader now contains a workaround
	to support CDROM booting on certain IBM BIOSs that expect the
	first sector of the emulated floppy to contain a valid MS-DOS
	BPB that they can modify. &merged;</para>

      <para arch="i386">The &os; boot loader now supports a
	<option>-p</option> flag to force the kernel to pause after
	each line of output during the probing phase. &merged;</para>

      <para arch="alpha,i386">The &os; boot loader is now capable of
	booting from filesystems with block sizes larger than
	8K. &merged;</para>

      <para>The kernel and modules have been moved to the directory
	<filename>/boot/kernel</filename>, so they can be easily
	manipulated together.  The boot loader has been updated to
	make this change as seamless as possible.</para>
    </sect3>

    <sect3>
      <title>Network Interface Support</title>

      <para>The &man.an.4; driver for Cisco Aironet cards now supports
	Wired Equivalent Privacy (WEP) encryption, settable via
	&man.ancontrol.8;. &merged;</para>

      <para>The &man.an.4; driver now supports the Cisco Aironet 350
	series of adaptors. &merged;</para>

      <para>The &man.an.4; driver now supports <quote>monitor</quote>
	mode, settable via the <option>-M</option> option to
	&man.ancontrol.8;. &merged;</para>

      <para>The &man.an.4; driver now supports Cisco LEAP, as well as
	the <quote>Home</quote> WEP key.  The Linux Aironet utilities
	are now supported under emulation. &merged;</para>

      <para arch="i386">Generic support for ARCNET token-based
	networks has been added. &merged;</para>

      <para arch="i386">The &man.bge.4; driver has been added to
	support the Broadcom BCM570x family of Gigabit Ethernet
	controllers, including the 3Com 3c996-T, the SysKonnect
	SK-9D21 and SK-9D41, and the built-in Gigabit Ethernet NICs on
	Dell PowerEdge 2550 servers.  Output TCP/IP checksum offload,
	jumbo frames and VLAN tag insertion/stripping are supported,
	as well as interrupt moderation. &merged;</para>

      <para arch="i386">The cm driver has been added to support SMC
	COM90cx6 ARCNET network adapters. &merged;</para>

      <para>The &man.dc.4; driver now supports NICs based on the Xircom
	3201 and Conexant LANfinity RS7112 chips.</para>

      <para>The &man.dc.4; driver now has support for
	VLANs. &merged;</para>

      <para>The &man.de.4; driver now performs round-robin arbitration
	between the transmit and receive units of the 21143, instead
	of giving priority to the receive unit.  This gives a
	10&ndash;15% performance improvement in the forwarding rate
	under heavy load. &merged;</para>

      <para arch="alpha">The &man.ed.4; driver is now supported.</para>

      <para arch="i386">Linksys Fast Ethernet PCCARD cards supported
	by the &man.ed.4; driver now require the addition of flag
	<literal>0x80000</literal> to their config line in
	&man.pccard.conf.5;.  This flag is not optional.  These
	Linksys cards will not be recognized without
	it. &merged;</para>

      <para>A bug in the &man.ed.4; driver that could cause panics
	with very short packets and BPF or bridging active has been
	fixed. &merged;</para>

      <para>The &man.ed.4; driver now has support for D-Link DL10022
	chips, necessary for the NetGear FA-410TX and other cards.  As
	a result, <literal>device miibus</literal> is required in
	kernel configurations using the &man.ed.4;
	driver. &merged;</para>

      <para arch="i386">The &man.el.4; driver can now be loaded as a
	module.</para>

      <para arch="i386">The &man.em.4; driver has been added to
	support NICs based on the Intel 82542, 82543, and 82544
	Gigabit Ethernet controller chips.  The driver supports
	transmit/receive checksum offload and jumbo frames on 82543
	and 82544-based adapters. &merged;</para>

      <para>The &man.faith.4; device is now loadable, unloadable, and
	clonable. &merged;</para>

      <para arch="i386">Support for Fujitsu MB86960A/MB86965A based
	Ethernet PC-Cards has been added back in the &man.fe.4;
	driver. &merged;</para>

      <para arch="alpha">The &man.fpa.4; driver now supports Digital's
	DEFPA FDDI adaptors on the Alpha. &merged;</para>

      <para>The &man.fxp.4; driver now requires a <literal>device
	miibus</literal> entry in the kernel configuration
	file. &merged;</para>

      <para>The &man.fxp.4; driver now contains a workaround for PCI
	protocol violations caused by defects in some systems based on
	the Intel ICH2/ICH2-M chip.  The workaround is to rewrite the
	EEPROM on the interface to disable Dynamic Standby Mode; once
	the EEPROM is rewritten, the system needs to be rebooted for
	the new settings to take effect. &merged;</para>

      <para>The &man.fxp.4; driver now supports Intel's loadable
	microcode to implement receive-side interrupt coalescing and
	packet bundling, on NICs that support these features.  This
	support can be activated by the use of the
	<option>link0</option> option to
	&man.ifconfig.8;. &merged;</para>

      <para arch="sparc64">The gem driver has been added to support
	the Sun GEM Gigabit Ethernet and ERI Fast Ethernet
	adapters.</para>

      <para>The &man.gx.4; driver has been added to support NICs based
	on the Intel 82542 and 82543 Gigabit Ethernet controller
	chips.  Both fiber and copper variants of the cards are
	supported.  Both boards support VLAN tagging/insertion, and
	the 82543 additionally supports TCP/IP checksum
	offload. &merged;</para>

      <para arch="sparc64">The hme driver has been added to support
	the Sun HME Fast Ethernet adapter, onboard on many Sun Ultra
	series machines.</para>

      <para>The &man.lge.4; driver has been added to support the Level
	1 LXT1001 NetCellerator Gigabit Ethernet controller chip. This
	device is used on some fiber optic GigE cards from SMC, D-Link
	and Addtron.  Jumbograms and TCP/IP checksum offload on
	receive are supported, although hardware VLAN filtering is
	not. &merged;</para>

      <para>The my driver, which supports the Myson Fast Ethernet and
	Gigabit Ethernet adapters, has been added. &merged;</para>

      <para>Added the &man.nge.4; driver, which supports PCI Gigabit
	Ethernet adapters based on the National Semiconductor DP83820
	and DP83821 Gigabit Ethernet controller chips, including the
	D-Link DGE-500T, SMC EZ Card 1000 (SMC9462TX), Asante
	FriendlyNet GigaNIC 1000TA and 1000TPC and Addtron AEG320T.
	This driver supports transmit and receive checksum
	offloading. &merged;</para>

      <para>The &man.pcn.4; driver, which supports the AMD PCnet/FAST,
	PCnet/FAST+, PCnet/FAST III, PCnet/PRO, PCnet/Home, and
	HomePNA adapters, has been added.  Although these cards are
	already supported by the &man.lnc.4; driver, the &man.pcn.4;
	driver runs these chips in 32-bit mode and uses the RX
	alignment feature to achieve zero-copy receive.  This driver
	is also machine-independent, so it will work on both the i386
	and Alpha platforms.  The &man.lnc.4; driver is still needed
	to support non-PCI cards. &merged;</para>

      <para>The &man.ray.4; driver, which supports the Webgear Aviator
	wireless network cards, has been committed.  The operation of
	&man.ray.4; interfaces can be modified by
	&man.raycontrol.8;. &merged;</para>

      <para arch="i386">The sbni driver, for supporting the Granch
	SBNI12 series of ISA and PCI point-to-point communications
	interfaces, has been added.  The <filename
	role="package">sysutils/sbniconfig</filename> port in the &os;
	Ports Collection can be used for configuring these
	devices. &merged;</para>

      <para>Added support for PCI Ethernet adapters based on the SiS
	900 and SiS 7016 Fast Ethernet controller chips (for example,
	as seen on the SiS 635 and 735 motherboard chipsets), as well
	as the National Semiconductor DP83815 chipset (including the
	NetGear FA311-TX and FA312-TX) in the form of the &man.sis.4;
	driver.  This device has support for VLANs. &merged;</para>

      <para arch="i386">The snc driver for the National Semiconductor
	DP8393X (SONIC) Ethernet controller has been added.
	Currently, this driver is only used on the PC-98
	architecture. &merged;</para>

      <para>The &man.stf.4; device is now clonable.</para>

      <para>The &man.tap.4; driver, a virtual Ethernet device driver
	for bridged configurations, has been added.  This device is
	clonable.  &merged;</para>

      <para>The &man.ti.4; driver now supports the Alteon AceNIC
	1000baseT Gigabit Ethernet and Netgear GA620T 1000baseT
	Gigabit cards. &merged;</para>

      <para>The &man.ti.4; driver correctly masks VLAN tags. &merged;</para>

      <para>The &man.txp.4; driver has been added to support NICs
	based on the 3Com 3XP Typhoon/Sidewinder (3CR990)
	chipset. &merged;</para>

      <para>&man.vlan.4; devices are now loadable, unloadable, and
	clonable. &merged;</para>

      <para>The &man.wi.4; driver now has support for Prism II and
	Prism 2.5-based NICs.  104/128-bit WEP now works on Prism
	cards. &merged;</para>

      <para>The &man.xl.4; driver now supports the 3Com 3C556 and
	3C556B MiniPCI adapters used on some laptops. &merged;</para>

      <para>The &man.xl.4; driver now supports reception of VLAN
	tagged frames (on the <quote>Cyclone</quote> or newer
	chipsets). &merged;</para>

      <para>The &man.xl.4; driver now supports send- and receive-side
	TCP/IP checksum offloading for NICs implementing this feature,
	such as the 3C905B, 3C905C, and 3C980C. &merged;</para>

      <para>A bug in the &man.xl.4; driver, related to statistics
	overflow interrupt handling, was causing slowdowns at medium
	to high packet rates; this has been fixed. &merged;</para>

      <para>The per-interface <varname>ifnet</varname> structure now
	has the ability to indicate a set of capabilities supported by
	a network interface, and which ones are enabled.
	&man.ifconfig.8; has support for querying these
	capabilities. &merged;</para>

      <para>Performance with hosts having a large number of IP aliases
	has been improved, by replacing the per-interface
	<varname>if_inaddr</varname> linear list with a hash table. &merged;</para>

      <para>Network devices now automatically appear as special files in
	<filename>/dev/net</filename>.  Interface hardware ioctls (not
	protocol or routing) can be performed on these devices.  The
	<varname>SIOCGIFCONF</varname> ioctl may be performed on the
	special <filename>/dev/network</filename> node.</para>

      <para>Selected network drivers now implement a semi-polling
	mode, which makes systems much more resilient to attacks and
	overloads.  To enable polling, the following options are
	required in a kernel configuration file:

      <programlisting>options DEVICE_POLLING
options HZ=1000 # not compulsory but strongly recommended</programlisting>

	The <varname>kern.polling.enable</varname> sysctl variable
	will then activate polling mode; with the
	<varname>kern.polling.user_frac</varname> sysctl indicating
	the percentage of CPU time to be reserved for userland.  The
	devices initially supporting polling are &man.dc.4;,
	&man.fxp.4;, and &man.sis.4;.  More details can be found in
	the &man.polling.4; manual page. &merged;</para>

      <para arch="i386">The packet-forwarding performance of certain
	network drivers (specifically &man.dc.4; and &man.sis.4;) has
	been enhanced by the elimination of unnecessary buffer
	copies. &merged;</para>
    </sect3>

    <sect3>
      <title>Network Protocols</title>

      <para>&man.accept.filter.9;, a kernel feature to reduce
	overheads when accepting and reading new connections on
	listening sockets, has been added. &merged;</para>

      <para>The <literal>proxy</literal> modifier to &man.arp.8;'s
	<option>-d</option> option has been renamed to
	<literal>pub</literal>, for consistency with the
	<option>-s</option> option.  The <literal>only</literal> keyword
	has been added to the <option>-s</option> and
	<option>-S</option> flags, to be used in creating
	<quote>proxy-only</quote> published entries. &merged;</para>

      <para>The read timeout feature of &man.bpf.4; now works more
	correctly with &man.select.2;/&man.poll.2;, and therefore with
	pthreads. &merged;</para>

      <para>&man.bridge.4; and &man.dummynet.4; have received some
	enhancements and bug fixes, and are now loadable
	modules. &merged;</para>

      <para>&man.bridge.4; now has better support for multiple,
	fully-independent bridging clusters, and is much more stable
	in the presence of dynamic attachments and detatchments.  Full
	support for VLANs is also supported. &merged;</para>

      <para>ICMP ECHO and TSTAMP replies are now rate limited.  TCP
	RSTs generated due to packets sent to open and unopen ports
	are now limited by separate counters.  Each rate limiting
	queue now has its own description.</para>

      <para>ICMP <literal>UNREACH_FILTER_PROHIB</literal> messages can
	now RST TCP connections in the <literal>SYN_SENT</literal>
	state if the correct sequence numbers are sent back, as
	controlled by the
	<varname>net.inet.tcp.icmp_may_rst</varname> sysctl. &merged;</para>

      <para>IP multicast now works on VLAN devices.  Several other
	bugs in the VLAN code have also been fixed.</para>

      <para>A bug in the IPSec processing for IPv4, which caused the
	inbound SPD checks to be ignored, has been fixed. &merged;</para>

      <para>&man.ipfw.4; now filters correctly in the presence of ECN
	bits in TCP segments. &merged;</para>

      <para>A new &man.ng.etf.4; netgraph node allows Ethernet type
	packets to be filtered to different hooks depending on
	ethertype. &merged;</para>

      <para>The &man.ng.gif.4; and &man.ng.gif.demux.4; netgraph
	nodes, for operating on &man.gif.4; devices, have been
	added.</para>

      <para>The &man.ng.ip.input.4; netgraph node, for queueing IP
	packets into the main IP input processing code, has been
	added.</para>

      <para>The &man.ng.mppc.4; and &man.ng.bridge.4; node types have
	been added to the &man.netgraph.4; subsystem.  The
	&man.ng.ether.4; node is now dynamically loadable.
	Miscellaneous bug fixes and enhancements have also been
	made. &merged;</para>

      <para>A new netgraph node type &man.ng.one2many.4; for
	multiplexing and demultiplexing packets over multiple links
	has been added.  &merged;</para>

      <para>A new sysctl
	<varname>net.inet.ip.check_interface</varname>, which is on by
	default, causes IP to verify that an incoming packet arrives
	on an interface that has an address matching the packet's
	destination address. &merged;</para>

      <para>A new sysctl
	<varname>net.link.ether.inet.log_arp_wrong_iface</varname> has
	been added to control the suppression of logging when ARP
	replies arrive on the wrong interface. &merged;</para>

      <para>A new <literal>options RANDOM_IP_ID</literal> kernel
	option causes the ID field of IP packets to be randomized.
	This closes a minor information leak which allows a remote
	observer to determine the rate at which the machine is
	generating packets, since the default behavior is to increment
	a counter for each packet sent. &merged;</para>

      <para arch="alpha">SLIP has been removed from the
	<filename>mfsroot</filename> floppy image.</para>

      <para>TCP has received some bug fixes for its delayed ACK
	behavior. &merged;</para>

      <para>TCP now supports the NewReno modification to the TCP Fast
	Recovery algorithm.  This behavior can be controlled via the
	<varname>net.inet.tcp.newreno</varname> sysctl
	variable. &merged;</para>

      <para>TCP now uses a more aggressive timeout for initial SYN
	segments; this allows initial connection attempts to be
	dropped much faster. &merged;</para>

      <para>The <literal>TCP_COMPAT_42</literal> kernel option has
	been removed. &merged;</para>

      <para>The <literal>TCP_RESTRICT_RST</literal> kernel option has
	been removed.  Similar functionality can be achieved with the
	<varname>net.inet.tcp.blackhole</varname> sysctl
	variable. &merged;</para>

      <para>TCP now has RFC 1323 extensions enabled by default in
	&man.rc.conf.5;. &merged;</para>

      <para>RFC 1323 and RFC 1644 TCP extensions are now disabled for
	a connection in progress if no response has been received by
	the third SYN segment sent.  This behavior tries to work
	around (very old) terminal servers with buggy VJ header
	compression implementations. &merged;</para>

      <para>The TCP implementation no longer requires the allocation
	of a TCP template structure for each connection; this should
	reduce the buffer usage on large systems handling many
	connections. &merged;</para>

      <para>TCP's default buffer sizes, controlled by the
	<varname>net.inet.tcp.sendspace</varname> and
	<varname>net.inet.tcp.recvspace</varname> sysctl variables,
	have been increased to 32K and 64K respectively.  Previously,
	the default for both buffer sizes was 16K.  To try to avoid
	increasing congestion, the default value for
	<varname>net.inet.tcp.local_slowstart_flightsize</varname> has
	been changed from infinity to 4. &merged;
 
	<note>
	  <para>On busy hosts, the new larger buffer sizes may require
	    manually increasing the
	    <varname>NMBCLUSTERS</varname> parameter, either in the
	    kernel configuration file or via the
	    <varname>kern.ipc.nmbclusters</varname> loader tunable.
	    <command>netstat -mb</command> can be used to monitor the
	    state of mbuf clusters.</para>
	</note>
      </para>

      <para>TCP now supports RFC 1948 (Defending Against Sequence
	Number Attacks).  This functionality is controlled by the
	<varname>net.inet.tcp.strict_rfc1948</varname> and
	<varname>net.inet.tcp.isn_reseed_interval</varname> sysctl
	variables. &merged;</para>

      <para>The TCP implementation in &os; now implements a cache of
	outstanding, received SYN segments.  Incoming SYN segments now
	cause entries to be placed in the cache until the TCP
	three-way handshake is complete, at which point, memory is
	allocated for the connection as usual.  In addition, all TCP
	Initial Sequence Numbers (ISNs) are used as cookies, allowing
	entries in the cache to be dropped, but still have their
	corresponding ACKs accepted later.  The combination of the
	so-called
	<quote>syncache</quote> and <quote>syncookies</quote> features
	makes a host much more resistant to TCP-based Denial of
	Service attacks.  Work on this feature was sponsored by DARPA
	and NAI Labs. &merged;</para>

      <para>A bug in the TCP implementation, which could cause
	connections to stall if a sender saw a zero-sized window, has
	been corrected. &merged;</para>

      <para>The TCP implementation now properly ignores packets
	addressed to IP-layer broadcast addresses. &merged;</para>

      <para>The ephemeral port range used for TCP and UDP has been
	changed to 49152&ndash;65535 (the old default was
	1024&ndash;5000).  This increases the number of concurrent
	outgoing connections/streams. &merged;</para>
    </sect3>

    <sect3>
      <title>Disks and Storage</title>

      <para arch="i386">Support for the Adaptec FSA family of PCI-SCSI
	RAID controllers has been added, in the form of the
	&man.aac.4; driver.  This driver includes proper handling of
	commands initiated by the adapter, addition/removal of disk
	devices, crashdump functionality, and &man.ioctl.2; commands
	necessary for the management CLI, and is fully qualified and
	sanctioned by Adaptec. &merged;</para>

      <para>The &man.ahc.4; driver has received numerous updates,
	bugfixes, and enhancements.  Among various improvements are
	improved compatibility with chips in <quote>RAID Port</quote>
	mode and systems with AAA and/or ARO cards installed, as well
	as performance improvements. Some bugs were also fixed,
	including a rare hang on Ultra2/U160
	controllers. &merged;</para>

      <para arch="i386">The &man.asr.4; driver, which provides support
	for the Adaptec SCSI RAID controller family, as well as the
	DPT SmartRAID V and VI families, has been
	added. &merged;</para>

      <para arch="i386">The &man.asr.4; driver now supports the
	Adaptec 2000S and 2005S Zero-Channel RAID
	controllers. &merged;</para>

      <para>The &man.ata.4; driver now has support for ATA100
	controllers.  In addition, it now supports the ServerWorks
	ROSB4 ATA33 chipset, the CMD 648 ATA66 and CMD 649 ATA100
	chipsets, and the Cyrix 5530. &merged;</para>

      <para>To provide more flexible configuration, the various
	options for the &man.ata.4; driver are now boot loader
	tunables, rather than kernel configure-time
	options. &merged;</para>

      <para>The &man.ata.4; driver now has support for tagged queuing,
	which is enabled by the <varname>hw.ata.tags</varname> loader
	tunable. &merged;</para>

      <para>The &man.ata.4; driver now has support for ATA
	<quote>pseudo</quote> RAID controllers as the Promise Fasttrak
	and HighPoint HPT370 controllers. &merged;</para>

      <para>The &man.ata.4; driver now supports a wider variety of SiS
	chipsets, as listed in the Hardware Notes. &merged;</para>

      <para>The &man.ata.4; driver now has support for creating,
	deleting, querying, and rebuilding ATA RAIDs under control of
	&man.atacontrol.8;. &merged;</para>

      <para>The BurnProof(TM) feature, for applicable ATAPI CD-ROM
	burners, is now supported. &merged;</para>

      <para>The &man.ata.4; driver now has support for 48-bit
	addressing.  Devices larger than 137GB are now
	supported. &merged;</para>

      <para>The &man.ata.4; driver now contains fixes for some data
	corruption problems on systems using the VIA 82C686B
	Southbridge chip. &merged;</para>

<!-- The following note needs to be made more specific or eliminated. -->
      <para>The CAM error recovery code has been updated.</para>

      <para>The &man.cd.4; driver now has support for write
	operations.  This allows writing to DVD-RAM, PD and similar
	drives that probe as CD devices.  Note that change affects
	only random-access writeable devices, not sequential-only
	writeable devices such as CD-R drives, which are supported by
	&man.cdrecord.1; (a part of
	<filename role="package">sysutils/cdrtools</filename> in the
	Ports Collection. &merged;</para>

      <para arch="i386">The ciss driver, for devices utilizing the
	Common Interface for SCSI-3 Support, has been added.  This
	driver supports the Compaq SmartRAID 5* family of RAID
	controllers (5300, 532, 5i). &merged;</para>

      <para>The &man.fdc.4; floppy disk has undergone a number of
	enhancements.  Density selection for common settings is now
	automatic; the driver is also much more flexible in setting
	the densities of various subdevices.</para>

      <para>The &man.geom.4; disk I/O request transformation framework
	has been added; this extensible framework is designed to
	support a wide variety of operations on I/O requests on their
	way from the upper kernel to the device drivers.</para>

      <para>The ida disk driver now has crashdump
	support. &merged;</para>

      <para arch="i386">The iir driver has been added to support the
	Intel Integrated RAID controllers, as well as prior ICP Vortex
	controllers.</para>

      <para arch="alpha">A bug that made certain CDROM drives fail to
	attach when connected to a SCSI card driven by &man.isp.4; has
	been fixed. &merged;</para>

      <para>The &man.isp.4; driver is now proactive about discovering
	Fibre Channel topology changes.</para>

      <para>The &man.isp.4; driver now supports target mode for Qlogic
	SCSI cards, including Ultra2 and Ultra3 and dual bus
	cards.</para>

      <para>The &man.isp.4; driver now supports the Qlogic 2300 and
	2312 Optical Fibre Channel PCI cards. &merged;</para>

      <para>&man.md.4;, the memory disk device, has had the
	functionality of &man.vn.4; incorporated into it.  &man.md.4;
	devices can now be configured by &man.mdconfig.8;.  &man.vn.4;
	has been removed.  The Memory Filesystem (MFS) has also been
	removed.</para>

      <para arch="i386">The &man.mly.4; driver, for Mylex PCI to SCSI
	AccelRAID and eXtremeRAID controllers with firmware 6.X and
	later, has been added. &merged;</para>

      <para arch="i386">The ncv, nsp, and stg drivers have been ported
	from NetBSD/pc98.  They support the NCR 53C50 / Workbit Ninja
	SCSI-3 / TMC 18C30, 18C50 based PC-Card/ISA SCSI controllers.
	All three drivers can be built and loaded as
	modules. &merged;</para>

      <para>Some problems in &man.sa.4; error handling have been
	fixed, including the <quote>tape drive spinning indefinitely
	upon &man.mt.1; <option>stat</option></quote> problem.</para>

      <para arch="i386">The &man.twe.4; 3ware ATA RAID driver has
	added. &merged;</para>

<!-- The following note needs to be made more specific or eliminated. -->
      <para>The &man.vinum.4; volume manager has received some bug
	fixes and enhancements.</para>

      <para>The &man.wd.4; compatibility devices were removed from the
	&man.ata.4; driver. &merged;</para>
    </sect3>

    <sect3>
      <title>Filesystems</title>

      <para>Support for named extended attributes was added to the
	&os; kernel.  This allows the kernel, and appropriately
	privileged userland processes, to tag files and directories
	with attribute data.  Extended attributes were added to
	support the TrustedBSD Project, in particular ACLs, capability
	data, and mandatory access control labels (see
	<filename>/usr/src/sys/ufs/ufs/README.extattr</filename> for
	details).</para>

      <para>Due to a licensing change, softupdates have been
	integrated into the main portion of the kernel source tree.
	As a consequence, softupdates are now available with the
	<filename>GENERIC</filename> kernel. &merged;</para>

      <para>A filesystem snapshot capability has been added to FFS.
	Details can be found in
	<filename>/usr/src/sys/ufs/ffs/README.snapshot</filename>.</para>

<!-- The following note needs to be made more specific or eliminated. -->
      <para>Softupdates for FFS have received some bug fixes and
	enhancements.</para>

      <para>When running with softupdates, &man.statfs.2; and
	&man.df.1; will track the number of blocks and files that are
	committed to being freed.</para>

      <para>A bug in FFS that could cause superblock corruption on
	very large filesystems has been corrected. &merged;</para>

      <para>The Inode Filesystem (IFS) has been added; more
	information can be found in
	<filename>/usr/src/sys/ufs/ifs/README</filename>.</para>

      <para>The ISO-9660 filesystem now has a hook that supports a
	loadable character conversion routine.  The
	<filename role="package">sysutils/cd9660_unicode</filename>
	port contains a set of common conversions. &merged;</para>

      <para>&man.kernfs.5; is obsolete and has been retired.</para>

      <para>A bug in the NFS client that caused bogus access times with
	<literal>O_EXCL|O_CREAT</literal> opens was
	fixed. &merged;</para>

      <para>A new NFS hash function (based on the Fowler/Noll/Vo hash
	algorithm) has been implemented to improve NFS performance by
	increasing the efficiency of the <varname>nfsnode</varname>
	hash tables. &merged;</para>

      <para>Client-side NFS locks have been implemented.</para>

      <para>The client-side and server-side of the NFS code in the
	kernel used to be intertwined in various complex ways.  They
	have been split apart for ease of maintenance and further
	development.</para>

      <para>Support for file system Access Control Lists (ACLs) has
	been introduced, allowing more fine-grained control of
	discretionary access control on files and directories.  This
	support was integrated from the TrustedBSD Project.  More
	details can be found in
	<filename>/usr/src/sys/ufs/ufs/README.acls</filename>.</para>

      <para>The directory layout preference algorithm for FFS
	(<literal>dirprefs</literal>) has been changed.  Rather than
	scattering directory blocks across a disk, it attempts to
	group related directory blocks together.  Operations
	traversing large directory hierarchies, such as the &os; Ports
	tree, have shown marked speedups.  This change is transparent
	and automatic for new directories. &merged;</para>

      <para arch="i386">smbfs (CIFS) support in kernel has been added.
	The userland programs &man.smbutil.1; and &man.mount.smbfs.8;
	can be used to work with SMB shares.  Note that
	&man.mount.smbfs.8; will automatically load the
	<filename>smbfs.ko</filename> module into the kernel, even if
	<literal>LIBMCHAIN</literal> and
	<literal>LIBICONV</literal> were not compiled into the kernel.
	&merged;</para>

      <para>For consistency, the fdesc, fifo, null, msdos, portal,
	umap, and union filesystems have been renamed to fdescfs,
	fifofs, msdosfs, nullfs, portalfs, umapfs, and unionfs.  Where
	applicable, modules and mount_* programs have been renamed.
	Compatibility <quote>glue</quote> has been added to
	&man.mount.8; so that <literal>msdos</literal> filesystem
	entries in &man.fstab.5; will work without changes.</para>

      <para>pseudofs, a pseudo-filesystem framework, has been added.
	&man.linprocfs.5; and &man.procfs.5; have been modified to use
	pseudofs.</para>

      <para>A simple hash-based lookup optimization for large
	directories called <literal>dirhash</literal> has been added.
	Conditional on the
	<literal>UFS_DIRHASH</literal> kernel option (enabled by
	default in the <filename>GENERIC</filename> kernel), it
	improves the speed of operations on very large directories at
	the expense of some memory. &merged;</para>

      <para>The virtual memory subsystem now backs UFS directory
	memory requirements by default (this behavior is controlled
	via the <varname>vfs.vmiodirenable</varname> sysctl
	variable). &merged;</para>

      <para>A bug that prevented the root filesystem from being
	mounted from a SCSI CDROM has been fixed (ATAPI CDROMs were
	always supported). &merged;</para>

      <para>A number of bugs in the filesystem code, discovered
	through the use of the <application>fsx</application>
	filesystem test tool, have been fixed.  Under certain
	circumstances (primarily related to use of NFS), these bugs
	could cause data corruption or kernel panics. &merged;</para>

      <para>Network filesystems (such as NFS and smbfs filesystems)
	listed in <filename>/etc/fstab</filename> can now be properly
	mounted during startup initialization; their mounts are
	deferred until after the network is initialized.</para>

      <para>Read-only support for the Universal Disk Format (UDF) has
	been added.  This format is used on packet-written CD-RWs and
	most commercial DVD-Video disks.  The &man.mount.udf.8;
	command can be used to mount these disks.</para>
    </sect3>

    <sect3>
      <title>PCCARD Support</title>

      <para arch="i386">The pccard driver and &man.pccardc.8; now
	support multiple <quote>beep types</quote> upon card insertion
	and removal. &merged;</para>

      <para>On many modern hosts, PCCARD devices can be configured to
	route their interrupts via either the ISA or PCI interrupt
	paths.  The &man.pcic.4; driver has been updated to support
	both interrupt paths (formerly, only routing via ISA was
	supported).  &merged; In most cases, configuration of PCMCIA
	devices in laptops is simpler and more flexible.  In addition,
	various Cardbus bridge PCI cards (such as those used by
	Orinoco PCI NICs) are now supported.  Some hosts may
	experience problems, such as hangs or panics, with PCI
	interrupt routing; they can frequently be made to work by
	forcing the older-style ISA interrupt routing.  The following
	lines, placed in <filename>/boot/loader.conf</filename>, may
	fix the problem:</para>

      <programlisting>hw.pcic.intr_path="1"
  hw.pcic.irq="0"</programlisting>

      <para>When installing &os; on such a system, typing the
	following lines to the boot loader may be helpful in starting
	up &os; for the first time:<para>

      <screen><prompt>ok</prompt> <userinput>set hw.pcic.intr_path="1"</userinput>
<prompt>ok</prompt> <userinput>set hw.pcic.irq="0"</userinput></screen>

      <para arch="i386">Preliminary Cardbus support under NEWCARD has
	been added.  This code supports the TI113X, TI12XX, TI125X,
	Ricoh 5C46/5C47, Topic 95/97/100 and Cirrus Logic PD683X
	bridges.  16-bit PC Card support is not yet functional.</para>
    </sect3>

    <sect3>
      <title>Multimedia Support</title>

      <para arch="i386">The &man.pcm.4; driver now supports the ESS
	Solo 1, Maestro-1, Maestro-2, and Maestro-2e; Forte Media
	fm801, ESS Maestro-2e, and VIA Technologies VT82C686A sound
	card/chipsets, and has received some other updates.  Separate
	drivers for the SoundBlaster 8 and SoundBlaster 16 now replace
	an older, unified driver.  A driver for the CMedia
	CMI8338/CMI8738 sound chips has been added.  A driver for the
	CS4281 sound chip has been added.  A driver for the S3
	SonicVibes chipset has been added. &merged;</para>

      <para arch="i386">A driver for the Avance Logic ALS4000 has been
	added. &merged;</para>

      <para arch="i386">A driver for the ESS Maestro-3/Allegro has
	been added, however due to licensing restrictions, it cannot
	be compiled into the kernel. &merged; To use this driver, add
	the following line to
	<filename>/boot/loader.conf</filename>:</para>

      <programlisting>snd_maestro3_load="YES"</programlisting>

      <para>The &man.bktr.4; driver has been updated to 2.18.  This
	update provides a number of new features.  New tuner types
	have been added, and improvements to the KLD module and to
	memory allocation have been made.  Bugs in &man.devfs.5; when
	unloading and reloading have been fixed.  Support for new
	Hauppauge Model 44xxx WinTV Cards (the ones with no audio mux)
	has been added. &merged;</para>

      <para arch="i386">The ufm driver, supporting the D-Link DSB-R100
	USB Radio, has been added. &merged;</para>

      <para>When sound modules are built, one can now load all the
	drivers and infrastructure by <command>kldload
	snd</command>. &merged;</para>

      <para>A new API has been added for sound cards with hardware
	volume control.</para>

      <para arch="i386">A driver for the Intel 443MX, 810, 815, and
	815E integrated sound devices has been added. &merged;</para>

      <para arch="i386">The via82c686 sound driver now supports the VIA
	VT8233. &merged;</para>

      <para arch="i386">The ich sound driver now support the SiS
	7012 chipset. &merged;</para>

    </sect3>

    <sect3>
      <title>Contributed Software</title>

      <para>The Forth Inspired Command Language
	(<application>FICL</application>) used in the boot loader has
	been updated to 2.05.</para>

      <para>Support for Advanced Configuration and Power Interface
	(ACPI), a multi-vendor standard for configuration and power
	management, has been added.  This functionality has been
	provided by the <application>Intel ACPI Component
	Architecture</application> project, as of the ACPI CA 20020308
	snapshot.  Some backward compatability for applications using
	the older APM standard has been provided.</para>

      <sect4>
	<title>IPFilter</title>

	<para><application>IPFilter</application> has been updated to
	  3.4.25.</para>

	<para><application>IPFilter</application> now supports
	  IPv6. &merged;</para>

      </sect4>

      <sect4 arch="i386">
	<title>isdn4bsd</title>

	<para><application>isdn4bsd</application> has been updated to
	  version 1.0.1.  As a result of this update, users of the
	  &man.i4bisppp.4; (kernel PPP over ISDN) driver
	  <emphasis>must</emphasis> now use &man.ispppcontrol.8;
	  instead of &man.spppcontrol.8; to configure and control these
	  network interfaces. &merged;</para>

	<para>The &man.ifpi.4; driver for supporting the AVM
	  Fritz!Card PCI version 2 controller has been added. &merged;</para>

	<para>The &man.ihfc.4; driver for supporting Cologne Chip
	  Designs HFC devices under
	  <application>isdn4bsd</application> has been
	  added. &merged;</para>

	<para>The &man.itjc.4; driver for supporting NETjet-S / Teles
	  PCI-TJ devices under <application>isdn4bsd</application> has
	  been added. &merged;</para>

	<para>Experimental support for the Eicon.Diehl DIVA 2.0 and
	  2.02 ISA PnP ISDN cards has been added to the &man.isic.4;
	  <application>isdn4bsd</application> driver. &merged;</para>

	<para>The &man.isic.4; driver now supports the Compaq Microcom
	  610 ISDN ISA PnP card. &merged;</para>

	<para>Active CAPI-based ISDN cards manufactured by AVM are now
	  supported using the &man.i4bcapi.4; and the &man.iavc.4;
	  driver.  The supported cards are the AVM B1 PCI and AVM B1
	  ISA Basic Rate cards and the AVM T1 Primary Rate
	  cards. &merged;</para>

	<para>A new <literal>maxconnecttime</literal> keyword is now
	  accepted in &man.isdnd.rc.5; files to limit the time a
	  connection may remain open. &merged;</para>

	<para>&man.isdnphone.8; now supports a <option>-k</option>
	  option for sending messages via the keypad facility to a PBX
	  or exchange office. &merged;</para>
      </sect4>

      <sect4 id="kame-kernel">
	<title>KAME</title>

	<para>The IPv6 stack is now based on a snapshot based on the
	  KAME Project's IPv6 snapshot as of 28 May, 2001.  Most of
	  the items listed in this section are a result of this
	  import.  <xref linkend="kame-userland"> lists userland
	  updates to the KAME IPv6 stack. &merged;</para>

	<para>&man.gif.4; is now based on RFC 2893, rather than RFC
	  1933.  The <literal>IFF_LINK2</literal> interface flag can
	  be used to control ingress filtering. &merged;</para>

	<para><application>IPSec</application> has received some
	  enhancements, including the ability to use the Rijndael and
	  SHA2 algorithms.  IPSec RC5 support has been removed due to
	  patent issues. &merged;</para>

	<para>&man.stf.4; now conforms to RFC 3056; the
	  <literal>IFF_LINK2</literal> interface flag can be used to
	  control ingress filtering. &merged;</para>

	<para>IPv6 has better checking of illegal addresses (such as
	  loopback addresses) on physical networks. &merged;</para>

	<para>The <varname>IPV6_V6ONLY</varname> socket option is now
	  completely supported.  The kernel's default behavior with
	  respect to this option is controlled by the
	  <varname>net.inet6.ip6.v6only</varname> sysctl
	  variable. &merged;</para>

	<para>RFC 3041 (Privacy Extensions for Stateless Address
	  Autoconfiguration) is now supported.  It can be enabled via
	  the <varname>net.inet6.ip6.use_tempaddr</varname> sysctl
	  variable. &merged;</para>
      </sect4>
    </sect3>
  </sect2>
  <sect2 id="security">
    <title>Security-Related Changes</title>

    <para>&man.sysinstall.8; now allows the user to select one of two
      <quote>security profiles</quote> at install-time.  These
      profiles enable different levels of system security by enabling
      or disabling various system services in &man.rc.conf.5; on new
      installs. &merged;</para>

    <para>A bug in which malformed ELF executable images can hang the
      system has been fixed (see security advisory
      FreeBSD-SA-00:41). &merged;</para>

    <para>A security hole in Linux emulation was fixed (see security
      advisory FreeBSD-SA-00:42). &merged;</para>

    <para>String-handling library calls in many programs were fixed to
      reduce the possibility of buffer overflow-related exploits.
      &merged;</para>

    <para>TCP now uses stronger randomness in choosing its initial
      sequence numbers (see security advisory
      FreeBSD-SA-00:52). &merged;</para>

    <para>Several buffer overflows in &man.tcpdump.1; were corrected
      (see security advisory FreeBSD-SA-00:61). &merged;</para>

    <para>A security hole in &man.top.1; was corrected (see security
      advisory FreeBSD-SA-00:62). &merged;</para>

    <para>A potential security hole caused by an off-by-one-error in
      &man.gethostbyname.3; has been fixed (see security advisory
      FreeBSD-SA-00:63). &merged;</para>

    <para>A potential buffer overflow in the &man.ncurses.3; library,
      which could cause arbitrary code to be run from within
      &man.systat.1;, has been corrected (see security advisory
      FreeBSD-SA-00:68). &merged;</para>

    <para>A vulnerability in &man.telnetd.8; that could cause it to
      consume large amounts of server resources has been fixed (see
      security advisory FreeBSD-SA-00:69). &merged;</para>

    <para>The <literal>nat deny_incoming</literal> command in
      &man.ppp.8; now works correctly (see security advisory
      FreeBSD-SA-00:70). &merged;</para>

    <para>A vulnerability in &man.csh.1;/&man.tcsh.1; temporary files
      that could allow overwriting of arbitrary user-writable files
      has been closed (see security advisory
      FreeBSD-SA-00:76). &merged;</para>

    <para>The &man.ssh.1; binary is no longer SUID root by
      default. &merged;</para>

    <para>Some fixes were applied to the Kerberos IV implementation
      related to environment variables, a possible buffer overrun, and
      overwriting ticket files. &merged;</para>

    <para>&man.telnet.1; now does a better job of sanitizing its
      environment. &merged;</para>

    <para>Several vulnerabilities in &man.procfs.5; were fixed (see
      security advisory FreeBSD-SA-00:77). &merged;</para>

    <para>A bug in <application>OpenSSH</application> in which a
      server was unable to disable &man.ssh-agent.1; or
      <literal>X11Forwarding</literal> was fixed (see security
      advisory FreeBSD-SA-01:01). &merged;</para>

    <para>A bug in &man.ipfw.8; and &man.ip6fw.8; in which inbound TCP
      segments could incorrectly be treated as being part of an
      <literal>established</literal> connection has been fixed (see
      security advisory FreeBSD-SA-01:08). &merged;</para>

    <para>A bug in &man.crontab.1; that could allow users to read any
      file on the system in valid &man.crontab.5; syntax has been
      fixed (see security advisory FreeBSD-SA-01:09). &merged;</para>

    <para>A vulnerability in &man.inetd.8; that could allow
      read-access to the initial 16 bytes of
      <groupname>wheel</groupname>-accessible files has been fixed
      (see security advisory FreeBSD-SA-01:11). &merged;</para>

    <para>A bug in &man.periodic.8; that used insecure temporary files
      has been corrected (see security advisory
      FreeBSD-SA-01:12). &merged;</para>

    <para><application>OpenSSH</application> now has code to prevent
      (instead of just mitigating through connection limits) an attack
      that can lead to guessing the server key (not host key) by
      regenerating the server key when an RSA failure is detected (see
      security advisory FreeBSD-SA-01:24). &merged;</para>

    <para>A number of programs have had output formatting strings
      corrected so as to reduce the risk of
      vulnerabilities. &merged;</para>

    <para>A number of programs that use temporary files now do so more
      securely. &merged;</para>

    <para>A bug in ICMP that could cause an attacker to disrupt TCP and UDP
      <quote>sessions</quote> has been corrected. &merged;</para>

    <para>A bug in &man.timed.8;, which caused it to crash if send
      certain malformed packets, has been corrected (see security
      advisory FreeBSD-SA-01:28). &merged;</para>

    <para>A bug in &man.rwhod.8;, which caused it to crash if send
      certain malformed packets, has been corrected (see security
      advisory FreeBSD-SA-01:29). &merged;</para>

    <para>A security hole in &os;'s FFS and EXT2FS implementations,
      which allowed a race condition that could cause users to have
      unauthorized access to data, has been fixed (see security
      advisory FreeBSD-SA-01:30). &merged;</para>

    <para>A remotely-exploitable vulnerability in &man.ntpd.8; has
      been closed (see security advisory
      FreeBSD-SA-01:31). &merged;</para>

    <para>A security hole in <application>IPFilter</application>'s
      fragment cache has been closed (see security advisory
      FreeBSD-SA-01:32). &merged;</para>

    <para>Buffer overflows in &man.glob.3;, which could cause
      arbitrary code to be run on an FTP server, have been closed.  In
      addition, to prevent some forms of DOS attacks, &man.glob.3;
      allows specification of a limit on the number of pathname
      matches it will return.  &man.ftpd.8; now uses this feature (see
      security advisory FreeBSD-SA-01:33). &merged;</para>

    <para>Initial sequence numbers in TCP are more thoroughly
      randomized (see security advisory FreeBSD-SA-01:39).  Due to
      some possible compatibility issues, the behavior of this
      security fix can be enabled or disabled via the
      <varname>net.inet.tcp.tcp_seq_genscheme</varname> sysctl
      variable.&merged;</para>

    <para>A vulnerability in the &man.fts.3; routines (used by
      applications for recursively traversing a filesystem) could
      allow a program to operate on files outside the intended
      directory hierarchy.  This bug has been fixed (see security
      advisory FreeBSD-SA-01:40). &merged;</para>

    <para><application>OpenSSH</application> now switches to the
      user's UID before attempting to unlink the authentication
      forwarding file, nullifying the effects of a race.</para>

    <para>A flaw allowed some signal handlers to remain in effect in a
      child process after being exec-ed from its parent.  This allowed
      an attacker to execute arbitrary code in the context of a setuid
      binary.  This flaw has been corrected (see security advisory
      FreeBSD-SA-01:42). &merged;</para>

    <para>A remote buffer overflow in &man.tcpdump.1; has been fixed
      (see security advisory FreeBSD-SA-01:48). &merged;</para>

    <para>A remote buffer overflow in &man.telnetd.8; has been fixed
      (see security advisory FreeBSD-SA-01:49). &merged;</para>

    <para>The new <varname>net.inet.ip.maxfragpackets</varname> and
      <varname>net.inet.ip6.maxfragpackets</varname> sysctl variables
      limit the amount of memory that can be consumed by IPv4 and IPv6
      packet fragments, which defends against some denial of service
      attacks (see security advisory
      FreeBSD-SA-01:52). &merged;</para>

    <para>All services in <filename>inetd.conf</filename> are now
      disabled by default for new installations.  &man.sysinstall.8;
      gives the option of enabling or disabling &man.inetd.8; on new
      installations, as well as editing
      <filename>inetd.conf</filename>. &merged;</para>

    <para>A flaw in the implementation of the &man.ipfw.8;
      <literal>me</literal> rules on point-to-point links has been
      corrected.  Formerly, <literal>me</literal> filter rules would
      match the remote IP address of a point-to-point interface in
      addition to the intended local IP address (see security advisory
      FreeBSD-SA-01:53). &merged;</para>

    <para>A vulnerability in &man.procfs.5;, which could allow a
      process to read sensitive information from another process's
      memory space, has been closed (see security advisory
      FreeBSD-SA-01:55). &merged;</para>

    <para>The <literal>PARANOID</literal> hostname checking in
      <application>tcp_wrappers</application> now works as advertised
      (see security advisory FreeBSD-SA-01:56). &merged;</para>

    <para>A local root exploit in &man.sendmail.8; has been closed
      (see security advisory FreeBSD-SA-01:57). &merged;</para>
   
    <para>A remote root vulnerability in &man.lpd.8; has been closed
      (see security advisory FreeBSD-SA-01:58). &merged;</para>

    <para>A race condition in &man.rmuser.8; that briefly exposed a
      world-readable <filename>/etc/master.passwd</filename> has been
      fixed (see security advisory FreeBSD-SA-01:59). &merged;</para>

    <para>A vulnerability in <application>UUCP</application> has been
      closed (see security advisory FreeBSD-SA-01:62).  All
      non-<username>root</username>-owned binaries in standard system
      paths now have the <literal>schg</literal> flag set to prevent
      exploit vectors when run by &man.cron.8;, by
      <username>root</username>, or by a user other then the one owning
      the binary.  In addition, &man.uustat.1; is now run via
      <filename>/etc/periodic/daily/410.status-uucp</filename> as
      <username>uucp</username>, not <username>root</username>.  In
      &os; -CURRENT, <application>UUCP</application> has since been
      moved to the Ports Collection and no longer a part of the base
      system. &merged;</para>

    <para>A security hole in the form of a buffer overflow in the
      &man.semop.2; system call has been closed. &merged;</para>

    <para>A security hole in <application>OpenSSH</application>, which
      could allow users to execute code with arbitrary privileges if
      <literal>UseLogin yes</literal> was set, has been closed.  Note
      that the default value of this setting is
      <literal>UseLogin no</literal>.  (See security advisory
      FreeBSD-SA-01:63.) &merged;</para>

    <para>The use of an insecure temporary directory by
      &man.pkg.add.1; could permit a local attacker to modify the
      contents of binary packages while they were being installed.
      This hole has been closed.  (See security advisory
      FreeBSD-SA-02:01.) &merged;</para>

    <para>A race condition in &man.pw.8;, which could expose the
      contents of <filename>/etc/master.passwd</filename>, has been
      eliminated.  (See security advisory FreeBSD-SA-02:02.)
      &merged;</para>

    <para>A bug in &man.k5su.8; could have allowed a process that had
      given up superuser privileges to regain them.  This bug has been
      fixed.  (See security advisory FreeBSD-SA-02:07.)
      &merged;</para>

    <para>An <quote>off-by-one</quote> bug has been fixed in
      <application>OpenSSH</application>'s multiplexing code.  This bug
      could have allowed an authenticated remote user to cause
      &man.sshd.8; to execute arbitrary code with superuser
      privileges, or allowed a malicious SSH server to execute arbitrary
      code on the client system with the privileges of the client user.  (See security
      advisory <ulink
        url="ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-02:13.openssh.asc">FreeBSD-SA-02:13</ulink>.)
      &merged;</para>

    <para>A programming error in <application>zlib</application> could
      result in attempts to free memory multiple times.  The
      &man.malloc.3;/&man.free.3; routines used in &os; are not
      vulnerable to this error, but applications receiving
      specially-crafted blocks of invalid compressed data could
      be made to function incorrectly or abort.  This
      <application>zlib</application> bug has been fixed.  For a
      workaround and solutions, see security advisory <ulink
      url="ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-02:18.zlib.asc">FreeBSD-SA-02:18</ulink>.
      &merged;</para>

    <para>Bugs in the TCP SYN cache (<quote>syncache</quote>) and SYN
      cookie (<quote>syncookie</quote>) implementations, which could
      cause legitimate TCP/IP traffic to crash a machine, have been
      fixed.  For a workaround and patches, see security advisory
      <ulink
      url="ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-02:20.syncache.asc">FreeBSD-SA-02:20</ulink>.
      &merged;</para>

    <para>A routing table memory leak, which could allow a remote
      attacker to exhaust the memory of a target machine, has been
      fixed.  A workaround and patches can be found in security
      advisory <ulink
      url="ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-02:21.tcpip.asc">FreeBSD-SA-02:21</ulink>.
      &merged;</para>

  </sect2>
  <sect2 id="userland">
    <title>Userland Changes</title>

    <para>If the first argument to &man.ancontrol.8; or
      &man.wicontrol.8; doesn't start with a <literal>-</literal>, it
      is assumed to be an interface.</para>

    <para>&man.apmd.8; now has the ability to monitor battery levels
      and execute commands based on percentage or minutes of battery
      life remaining via the <literal>apm_battery</literal>
      configuration directive.  See the commented-out examples in
      <filename>/etc/apmd.conf</filename> for the
      syntax. &merged;</para>

    <para>&man.arp.8; now prints the applicable interface name for
      each ARP entry. &merged;</para>

    <para>&man.arp.8; now prints <literal>[fddi]</literal> or
      <literal>[atm]</literal> tags for addresses on interfaces of
      those types.</para>

    <para>&man.atacontrol.8; has been added to control various aspects
      of the &man.ata.4; driver. &merged;</para>

    <para arch="sparc64">The system &man.awk.1; refers to
      <application>BWK awk</application> on the &arch; platform.  It
      remains <application>GNU awk</application> on other
      platforms.</para>

    <para arch="i386">&man.boot98cfg.8;, a PC-98 boot manager
      installation and configuration utility, has been
      added. &merged;</para>

    <para>&man.burncd.8; now supports a <option>-m</option> option for
      multisession mode (the default behavior now is to close disks as
      single-session).  A <option>-l</option> option to take a list of
      image files from a filename was also added;
      <filename>-</filename> can be used as a filename for
      <literal>stdin</literal>. &merged;</para>

    <para>&man.burncd.8; now supports Disk At Once (DAO) mode,
      selectable via the <option>-d</option> flag.</para>

    <para>&man.burncd.8; now has the ability to write VCDs/SVCDs.</para>

    <para>&man.c89.1; has been converted from a shell script to a
      binary executable, fixing some minor bugs. &merged;</para>

    <para arch="i386">A minimalized version of &man.camcontrol.8; is
      now available on the installation floppy.  This allows it to
      rescan for devices that have been connected after booting, or to
      show the devices attached to SCSI busses (e. g. from within the
      <quote>emergency holographic shell</quote>). &merged;</para>

    <para>&man.cat.1; now has the ability to read from UNIX-domain
      sockets. &merged;</para>

    <para>&man.cdcontrol.1; now supports a <literal>cdid</literal>
      command, which calculates and displays the CD serial number,
      using the same algorithm used by the CDDB
      database. &merged;</para>

    <para>&man.cdcontrol.1; now uses the <envar>CDROM</envar>
      environment variable to pick a default device. &merged;</para>

    <para>&man.cdcontrol.1; now supports <literal>next</literal> and
      <literal>prev</literal> commands to skip forwards or backwards a
      specified number of tracks while playing an audio
      CD. &merged;</para>

    <para>&man.chflags.1; has moved from <filename>/usr/bin</filename>
      to <filename>/bin</filename>.</para>

    <para>&man.chio.1; now has the ability to specify elements by
      volume tag instead of by their physical location as well as the
      ability to return an element to its previous
      location. &merged;</para>

    <para>&man.chmod.1; now supports a <option>-h</option> for
      changing the mode of a symbolic link.</para>

    <para>&man.chown.8; now correctly follows symbolic links named as
      command line arguments if run without
      <option>-R</option>. &merged;</para>

    <para>&man.chown.8; no longer takes <literal>.</literal> as a
      user/group delimeter.  This change was made to support usernames
      containing a <literal>.</literal>.</para>

    <para>Use of the <literal>CSMG_*</literal> macros no longer
      require inclusion of
      <filename>&lt;sys/param.h&gt;</filename></para>

    <para>&man.col.1; now takes a <option>-p</option> flag to force
      unknown control sequences to be passed through
      unchanged. &merged;</para>

    <para>The <filename>compat3x</filename> distribution has been
      updated to include libraries present in &os;
      3.5.1-RELEASE. &merged;</para>

    <para>A <filename>compat4x</filename> distribution has been added
      for compatibility with &os; 4-STABLE.</para>

    <para>&man.config.8; is now better about converting various
      warnings that should have been errors into actual fatal errors
      with an exit code.  This ensures that <literal>make
      buildkernel</literal> doesn't quietly ignore them and build a
      bogus kernel without a human to read the errors. &merged;</para>

    <para>A number of buffer overflows in &man.config.8; have been
      fixed. &merged;</para>

    <para>&man.ctags.1; no longer creates a corrupt tags file if the
      source file used <literal>//</literal> (C++-style)
      comments. &merged;</para>

    <para>The &man.daemon.8; program, a command-line interface to
      &man.daemon.3;, has been added.  It detaches itself from its
      controlling terminal and executes a program specified on the
      command line.  This allows the user to run an arbitrary program
      as if it were written to be a daemon.</para>

    <para>devinfo, a simple tool to print the device tree and resource
      usage by devices, has been added.</para>

    <para>&man.df.1; now takes a <option>-l</option> option to only
      display information about locally-mounted
      filesystems. &merged;</para>

    <para>&man.disklabel.8; now supports partition sizes expressed in
      kilobytes, megabytes, or gigabytes, in addition to
      sectors. &merged;</para>

    <para>&man.diskpart.8; has been declared obsolete, and has been
      removed.</para>

    <para>&man.dmesg.8; now has a <option>-a</option> option to show
      the entire message buffer, including &man.syslogd.8; records and
      <filename>/dev/console</filename> output. &merged;</para>

    <para>&man.du.1; now takes a <option>-I</option> command-line flag
      to ignore/skip files and subdirectories matching a specified
      shell-glob mask. &merged;</para>

    <para>&man.dump.8; now supports inheritance of the
      <literal>nodump</literal> flag down a hierarchy. &merged;</para>

    <para>The <option>-T</option> option to &man.dump.8; no longer
      swallows an extra argument. &merged;</para>

    <para>&man.dump.8; has a new <option>-D</option> option, allowing
      the path to the <filename>/etc/dumpdates</filename> file to be
      changed. &merged;</para>

    <para>&man.dump.8; now supplies progress information in its
      process title, useful for monitoring automated
      backups. &merged;</para>

    <para>&man.dump.8; now supports a new <option>-S</option> to allow
      it to just print out the dump size estimates and exit.</para>

    <para>&man.edquota.8; now takes a <option>-f</option> option to
      allow limiting the prototype quota distribution (specified with
      <option>-p</option>) to a single filesystem. &merged;</para>

    <para><filename>/etc/rc.firewall</filename> and
      <filename>/etc/rc.firewall6</filename> will no longer add their own
      hardcoded rules in the cases of a rules file in the
      <varname>firewall_type</varname> variable or a non-existent
      firewall type.  (The motivation for this change is to avoid
      acting on assumptions about a site's firewall policies.)  In
      addition, the <literal>closed</literal> firewall type now works
      as documented in the &man.rc.firewall.8; manual page. &merged;</para>

    <para>The functionality of <filename>/etc/security</filename> has
      been been moved into a set of scripts under the &man.periodic.8;
      framework, to make local customization easier and more
      maintainable.  These scripts now reside in
      <filename>/etc/periodic/security/</filename>. &merged;</para>

    <para>&man.fbtab.5; now accepts glob matching patterns for target
      devices, not just individual devices and directories.</para>

    <para arch="i386">&man.fdisk.8; no longer attempts to search for a
      device if none has been specified on the command line, but
      instead tries to figure out the default device name from the
      root device.</para>

    <para>&man.fdread.1;, a program to read data from floppy disks,
      has been added.  It is a counterpart to &man.fdwrite.1; and is
      designed to provide a means of recovering at least some data
      from bad media, and to obviate for a complex invocation of
      &man.dd.1;.</para>

    <para>&man.find.1; now takes the <option>-empty</option> flag,
      which returns true if a file or directory is
      empty. &merged;</para>

    <para>&man.find.1; now takes the <option>-iname</option> and
      <option>-ipath</option> primaries for case-insensitive matches,
      and the <option>-regexp</option> and <option>-iregexp</option>
      primaries for regular-expression matches.  The
      <option>-E</option> flag now enables extended regular
      expressions. &merged;</para>

    <para>&man.find.1; now has the <option>-anewer</option>,
      <option>-cnewer</option>, <option>-mnewer</option>,
      <option>-okdir</option>, and <option>-newer[acm][acmt]</option>
      primaries for comparisons of file timestamps.  The latter
      primaries can be specified with various units of
      time. &merged;</para>

    <para>&man.finger.1; now has the ability to support fingering
      aliases, via the &man.finger.conf.5; file. &merged;</para>

    <para>&man.finger.1; now has support for a
      <filename>.pubkey</filename> file.</para>

    <para>&man.fmt.1; has been rewritten; the rewrite fixes a number
      of bugs compared to its prior behavior. &merged;</para>

    <para>&man.fmtcheck.3;, a function for checking consistency of
      format string arguments, has been added. &merged;</para>

    <para>&man.fsck.8; wrappers have been imported; this feature
      provides infrastructure for &man.fsck.8; to work on different
      types of filesystems (analogous to &man.mount.8;).</para>

    <para>The behavior of &man.fsck.8; when dealing with various
      passes (a la <filename>/etc/fstab</filename>) has been modified
      to accommodate multiple-disk filesystems.</para>

    <para>&man.fsck.8; now has support for foreground
      (<option>-F</option>) and background (<option>-B</option>)
      checks.  Traditionally, &man.fsck.8; is invoked before the
      filesystems are mounted and all checks are done to completion at
      that time.  If background checking is available, &man.fsck.8; is
      invoked twice.  It is first invoked at the traditional time,
      before the filesystems are mounted, with the <option>-F</option>
      flag to do checking on all the filesystems that cannot do
      background checking.  It is then invoked a second time, after
      the system has completed going multiuser, with the
      <option>-B</option> flag to do checking on all the filesystems
      that can do background checking.  Unlike the foreground
      checking, the background checking is started asynchronously so
      that other system activity can proceed even on the filesystems
      that are being checked.  Boot-time enabling of this feature is
      controlled by the
      <varname>background_fsck</varname> option in &man.rc.conf.5;.</para>

    <para>Shortly after the receipt of a <literal>SIGINFO</literal>
      signal (normally control-T from the controlling tty),
      &man.fsck.ffs.8; will now output a line indicating the current
      phase number and progress information relevant to the current
      phase. &merged;</para>

    <para>&man.fsck.ffs.8; now supports background filesystem checks
      to mounted FFS filesystems with the <option>-B</option> option
      (softupdates must be enabled on these filesystems).  The
      <option>-F</option> flag now determines whether a specified
      filesystem needs foreground checking.</para>

    <para>A new &man.fsck.msdosfs.8; utility has been added to check
      the consistency of MS-DOS filesystems. &merged;</para>

    <para>&man.ftpd.8; now supports a <option>-r</option> flag for
      read-only mode and a <option>-E</option> flag to disable
      <literal>EPSV</literal>.  It also has some fixes to reduce
      information leakage and the ability to specify compile-time port
      ranges. &merged;</para>

    <para>&man.ftpd.8; now supports <option>-o</option> and
      <option>-O</option> options to disable the
      <literal>RETR</literal> command; the former for everybody, and
      the latter only for guest users.  Coupled with
      <option>-A</option> and appropriate file permissions, these can
      be used to create a relatively safe anonymous FTP drop box for
      others to upload to.</para>

    <para arch="i386">&man.gdb.1; now supports hardware watchpoints (using the
      kernel's debug register + support that has been introduced in
      &os; 4.0). &merged;</para>

    <para>The &man.getprogname.3; and &man.setprogname.3; library
      functions have been added to manipulate the name of the current
      program.  They are used by error-reporting routines to produce
      consistent output. &merged;</para>

    <para>&man.gprof.1; now has a <option>-K</option> option to enable
      dynamic symbol resolution from the currently-running kernel.
      With this change, properly-compiled KLD modules are now able to
      be profiled.</para>

    <para>&man.growfs.8;, a utility for growing FFS filesystems, has
      been added.  &man.ffsinfo.8;, a utility for dump all the
      meta-information of an existing filesystem, has also been
      added. &merged;</para>

    <para>The &man.groups.1; and &man.whoami.1; shell scripts are now
      unnecessary; their functionality has been completely folded into
      &man.id.1;. &merged;</para>

    <para>The &man.ibcs2.8;, &man.linux.8;, &man.osf1.8;, and
      &man.svr4.8; scripts, whose sole purpose was to load emulation
      kernel modules, have been removed.  The kernel module system
      will automatically load them as needed to fulfill
      dependencies.</para>

    <para>&man.indent.1; has gained some new formatting
      options. &merged;</para>

    <para>&man.ifconfig.8; can set the link-layer address of
      an interface using the <option>link</option> parameter.
      &merged;</para>

    <para>&man.ifconfig.8; can now accept addresses in slash/CIDR
    notation. &merged;</para>

    <para>&man.ifconfig.8; now has support for setting parameters for
      IEEE 802.11 wireless network devices.  &man.wi.4; and &man.an.4;
      devices are supported, and partial support is provided for
      &man.awi.4; devices. &merged;</para>

    <para>&man.ifconfig.8; no longer displays the list of supported
      media by default.  Instead it displays it when the
      <option>-m</option> flag is given. &merged;</para>

    <para>The syntax of &man.inetd.8;'s support for &man.faithd.8; is
      now compatible with that of other BSDs. &merged;</para>

    <para>The <literal>ident</literal> protocol support in
      &man.inetd.8; has been cleaned up and updated. &merged;</para>

    <para>&man.inetd.8; now has the ability to manage UNIX-domain
      sockets. &merged;</para>

    <para>By default, &man.inetd.8; is no longer run by &man.rc.8; at
      boot-time, although &man.sysinstall.8; gives the option of
      enabling it during binary installations.  &merged; &man.inetd.8; can also
      be enabled by adding the following line to
      <filename>/etc/rc.conf</filename>:</para>

    <programlisting>inetd_enable="YES"</programlisting>

    <para>&man.install.1; has a number of new features, including the
      <option>-b</option> and <option>-B</option> options for backing up
      existing target files and the <option>-S</option> option for
      <quote>safe</quote> (atomic copy) operation.  The
      <option>-c</option> (copy) flag is now the default, and the
      <option>-D</option> (debugging) flag has been withdrawn.
      &man.install.1; now issues a warning if <option>-d</option>
      (create directories) and <option>-C</option> (copy changed files
      only) are used together. &merged;</para>

    <para>IP Filter is now supported by the &man.rc.conf.5; boot-time
      configuration and initialization. &merged;</para>

    <para>&man.ipfstat.8; now supports the <option>-t</option> option
      to turn on a &man.top.1;-like display. &merged;</para>

    <para>&man.ipfw.8; will now avoid the display of dynamic firewall
      rules unless the <option>-d</option> flag is passed to it.  The
      <option>-e</option> option lists expired dynamic
      rules. &merged;</para>

    <para>&man.ipfw.8; has a new feature (<literal>me</literal>) that
      allows for packet matching on interfaces with
      dynamically-changing IP addresses. &merged;</para>

    <para>&man.ipfw.8; has a new <literal>limit</literal> type of
      firewall rule, which limits the number of sessions between
      address pairs. &merged;</para>

    <para>&man.ipfw.8; filter rules can now match on the value of the
      IPv4 precedence field.</para>

    <para>&man.ip6fw.8; now has the ability to use a preprocessor and
      use the <option>-q</option> (quiet) flag when reading from a
      file. &merged;</para>

    <para>&man.kenv.1;, a command to dump the kernel environment, has
      been added. &merged;</para>

    <para>&man.keyinfo.1; is now a C program, rather than a Perl
      script. &merged;</para>

    <para>The &man.kget.8; utility has been removed (it was only
      useful for UserConfig, which is not present in &os;
      &release.current;).</para>

    <para>&man.killall.1; is now a C program, rather than a Perl
      script.  As a result, its <option>-m</option> option now uses
      the regular expression syntax of &man.regex.3;, rather than that
      of &man.perl.1;. &merged;</para>

    <para>&man.killall.1; now allows non-root users to kill SUID root
      processes that they started, the same as the Perl version
      did. &merged;</para>

    <para>The &man.kldconfig.8; utility has been added to make it
      easier to manipulate the kernel module search
      path. &merged;</para>

    <para>ktrdump, a utility to dump the ktr trace buffer from
      userland, has been added.</para>

    <para>&man.last.1; now implements a <option>-d</option> that
      provides a <quote>snapshot</quote> of who was logged in at a
      particular date and time. &merged;</para>

    <para>&man.last.1; now supports a <option>-y</option> flag, which
      causes the year to be included in the session start time.</para>

    <para>The &man.lastlogin.8; utility, which prints the last login
      time of each user, has been imported from
      NetBSD. &merged;</para>

    <para>&man.ldconfig.8; now checks directory ownerships and
      permissions for greater security; these checks can be disabled
      with the <option>-i</option> flag. &merged;</para>

    <para>&man.ldd.1; can now be used on shared libraries, in addition
      to executables. &merged;</para>

    <para>&man.ldd.1; now supports a <option>-a</option> flag to list
      all the objects that are needed by each loaded object.</para>

    <para><filename>libc</filename> is now thread-safe by default;
      <filename>libc_r</filename> contains only thread
      functions.</para>

    <para><filename>libcrypt</filename> and
      <filename>libdescrypt</filename> have been unified to provide a
      configurable password authentication hash library.  Both the md5
      and des hash methods are provided unless the des hash is
      specifically compiled out. &merged;</para>

    <para><filename>libcrypt</filename> now has support for Blowfish
      password hashing. &merged;</para>

    <para arch="i386"><filename>libdisk</filename> can now do
      install-time configuration of the <filename>boot0</filename>
      boot loader. &merged;</para>

    <para><filename>libstand</filename> now has support for
      filesystems containing
      <application>bzip2</application>-compressed
      files. &merged;</para>

    <para><filename>libstand</filename> now has support for
      overwriting the contents of a file on a UFS filesystem (it
      cannot expand or truncate files because the filesystem may be
      dirty or inconsistent).</para>

    <para><filename>libstand</filename> now has support for loading
      large kernels and modules split across several physical
      media. &merged;</para>

    <para>The default TCP port range used by
      <filename>libfetch</filename> for passive FTP retrievals has
      changed; this affects the behavior of &man.fetch.1;, which has
      gained the <option>-U</option> option to restore the old
      behavior. &merged;</para>

    <para><filename>libfetch</filename> now has support for an
      authentication callback. &merged;</para>

    <para><filename>libfetch</filename> now has support for a
      <envar>HTTP_USER_AGENT</envar> environment
      variable. &merged;</para>

    <para><filename>libgmp</filename> has been superceded by
      <filename>libmp</filename>.

    <para>The functions from <filename>libposix1e</filename> have been
      integrated into <filename>libc</filename>.</para>

    <para><filename>libusb</filename> has been renamed as
      <filename>libusbhid</filename>, following NetBSD's naming
      conventions. &merged;</para>

    <para>&man.ln.1; now takes an <option>-i</option> option to
      request user confirmation before overwriting an existing
      file. &merged;</para>

    <para>&man.ln.1; now takes a <option>-h</option> flag to avoid
      following a target that is a link, with a <option>-n</option>
      flag for compatibility with other
      implementations. &merged;</para>

    <para>&man.logger.1; can now send messages directly to a remote
      syslog. &merged;</para>

    <para>&man.login.1; now exports environment variables set by
      <application>PAM</application> modules. &merged;</para>

    <para>&man.lpc.8; has been improved; <command>lpc clean</command>
      is now somewhat safer, and a new <command>lpc tclean</command>
      command has been added to check to see what files would be
      removed by <command>lpc clean</command>. &merged;</para>

    <para>&man.lpd.8; now takes two new options: <option>-c</option>
      will log all connection errors to &man.syslogd.8;, while
      <option>-W</option> will allow connections from non-reserved
      ports. &merged;</para>

    <para>&man.lpd.8; now has some support for
      <literal>o</literal>-type print-file actions in its control
      files, which allows printing of PostScript files generated by
      <application>MacOS</application> 10.1. &merged;</para>

    <para>&man.lpr.1;, &man.lpq.1;, and &man.lpd.8; have received a
      few minor enhancements. &merged;</para>

    <para>Catching up with most other network utilities in the base
      system, &man.lpr.1;, &man.lpd.8;, &man.syslogd.8;, and
      &man.logger.1; are now all IPv6-capable. &merged;</para>

    <para><command>lprm -</command> now works for remote printer
      queues. &merged;</para>

    <para>&man.ls.1; can produce colorized listings with the
      <option>-G</option> flag (and appropriate terminal support).
      The <envar>CLICOLOR</envar> environment variable can be set to
      enable colorized listings by default. &merged;</para>

    <para>&man.mail.1; now takes a <option>-E</option> flag to avoid
      sending messages with empty bodies. &merged;</para>

    <para>&man.make.1; has gained the <literal>:C///</literal>
      (regular expression substitution), <literal>:L</literal>
      (lowercase), and <literal>:U</literal> (uppercase) variable
      modifiers.  These were added to reduce the differences between
      the &os; and OpenBSD/NetBSD &man.make.1; programs.
      &merged;</para>

    <para>Bugs in &man.make.1;, among which include broken null suffix
      behavior, bad assumptions about current directory permissions,
      and potential buffer overflows, have been fixed. &merged;</para>

    <para>The new <varname>CPUTYPE</varname>
      <filename>make.conf</filename> variable controls the compilation
      of processor-specific optimizations in various pieces of code
      such as <application>OpenSSL</application>. &merged;</para>

    <para>The &os; <filename>Makefile</filename> infrastructure now
      supports the <varname>WARNS</varname> directive from NetBSD.
      This directive controls the addition of compiler warning flags
      to <varname>CFLAGS</varname> in a relatively compiler-neutral
      manner. &merged;</para>

    <para>&man.man.1; is no longer installed SUID
      <username>man</username>, in order to reduce vulnerabilities
      associated with generating <quote>catpages</quote> (preformatted
      manual pages cached for repeated viewing).  As a result,
      &man.man.1; can no longer create system catpages on a regular
      user's behalf.  It is still able to do so if the user has write
      permissions to the directory holding catpages (e.g. a user's own
      manpages) or if the running user is
      <username>root</username>.</para>

    <para>The &man.mdmfs.8; command has been added; it is a wrapper
      around &man.mdconfig.8;, &man.disklabel.8;, &man.newfs.8;, and
      &man.mount.8; that mimics the command line option set of the
      deprecated &man.mount.mfs.8;.</para>

    <para>&man.mergemaster.8; now sources an
      <filename>/etc/mergemaster.rc</filename> file and also prompts
      the user to run recommended commands (such as
      <command>newaliases</command>) as needed. &merged;</para>

    <para>&man.mergemaster.8; now supports two new flags.
      The <option>-p</option> flag enables a
      <quote>pre-<literal>buildworld</literal></quote> mode to files
      known to be essential to the success of the
      <literal>buildworld</literal> and
      <literal>installworld</literal> system updating steps.  The
      <option>-C</option> flag, used after a successful
      &man.mergemaster.8; run, compares options in
      <filename>/etc/rc.conf</filename> to the default options in
      <filename>/etc/defaults/rc.conf</filename>. &merged;</para>

    <para>&man.moused.8; now takes a <option>-a</option> option to
      control mouse acceleration. &merged;</para>

    <para>&man.mtree.8; now includes support for a file that lists
      pathnames to be excluded when creating and verifying prototypes.
      This makes it easier to use &man.mtree.8; as a part of an
      intrusion-detection system. &merged;</para>

    <para>&man.natd.8; now supports a
      <option>-log_ipfw_denied</option> option to log packets that
      cannot be re-injected because they are blocked by &man.ipfw.8;
      rules. &merged;</para>

    <para>The <quote>in use</quote> percentage metric displayed by
      &man.netstat.1; now really reflects the percentage of network
      mbufs used. &merged;</para>

    <para>&man.netstat.1; now has a <option>-W</option> flag that
      tells it not to truncate addresses, even if they're too long for
      the column they're printed in. &merged;</para>

    <para>&man.netstat.1; now keeps track of input and output packets
      on a per-address basis for each interface. &merged;</para>

    <para>&man.netstat.1; now has a <option>-z</option> flag to reset
      statistics. &merged;</para>

    <para>&man.netstat.1; now has a <option>-S</option> flag to print
      address numerically but port names symbolically. &merged;</para>

    <para>&man.newfs.8; now implements write combining, which can make
      creation of new filesystems up to seven times
      faster. &merged;</para>

    <para>&man.newfs.8; now takes a <option>-U</option> option to
      enable softupdates on a new filesystem. &merged;</para>

    <para>The default number of cylinders per group in &man.newfs.8;
      is now computed to be the maximum allowable given the current
      filesystem parameters.  It can be overridden with the
      <option>-c</option> option.  Formerly, the default was fixed at
      16.  This change leads to better &man.fsck.8; performance and
      reduced fragmentation. &merged;</para>

    <para><anchor id="newfs-block-frag-sizes">The default block and
      fragment sizes for new filesystems created by &man.newfs.8; are
      now 16384 and 2048 bytes, respectively (the old defaults were
      8192 and 1024 bytes).  This change generally provides increased
      performance, at the expense of some wasted disk
      space. &merged;</para>

    <para>A number of archaic features of &man.newfs.8; have been
      removed; these implement tuning features that are essentially
      useless on modern hard disks.  These features were controlled by
      the <option>-O</option>, <option>-d</option>,
      <option>-k</option>, <option>-l</option>, <option>-n</option>,
      <option>-p</option>, <option>-r</option>, <option>-t</option>,
      and <option>-x</option> flags.</para>

    <para>&man.newsyslog.8; now has the ability to compress log files
      using &man.bzip2.1;. &merged;</para>

    <para><application>NFS</application> now works over IPv6.</para>

    <para>&man.ngctl.8; now supports a <option>write</option> command
      to send a data packet down a given hook. &merged;</para>

    <para>&man.nl.1;, a line numbering filter program, has been
      added. &merged;</para>

    <para><application>nsswitch</application> support has been merged
      from NetBSD.  By creating an &man.nsswitch.conf.5; file, &os;
      can be configured so that various databases such as
      &man.passwd.5; and &man.group.5; can be looked up using flat
      files, NIS, or Hesiod.  The old
      <filename>hosts.conf</filename> file is no longer used.</para>

    <para><application>PAM</application> support has been added for
      account management and sessions.</para>

    <para><application>PAM</application> configuration is now
      specified by files in <filename>/etc/pam.d/</filename>, rather
      than a single <filename>/etc/pam.conf</filename> file.
      <filename>/etc/pam.d/README</filename> has more details.</para>

    <para>A number of new <application>PAM</application>
      modules have been added.</para>

<!-- XXX List new PAM modules -->

    <para>&man.passwd.1; and &man.pw.8; now select the password hash
      algorithm at run time.  See the <literal>passwd_format</literal>
      attribute in
      <filename>/etc/login.conf</filename>. &merged;</para>

    <para>&man.pax.1; has received a number of enhancements, including
      &man.cpio.1; functionality, &man.tar.1; compatibility
      enhancements, <option>-z</option> and <option>-Z</option> flags
      for &man.gzip.1; and &man.compress.1; functionality, and a
      number of bug fixes.</para>

    <para>&man.pciconf.8; now supports a <option>-v</option> option to
      display the vendor/device information of configured devices, in
      conjunction with the <option>-l</option> option.  The default
      vendor/device database can be found at
      <filename>/usr/share/misc/pci_vendors</filename>. &merged;</para>

    <para>The behavior of &man.periodic.8; is now controlled by
      <filename>/etc/defaults/periodic.conf</filename> and
      <filename>/etc/periodic.conf</filename>. &merged;</para>

    <para>&man.ping.8; now supports a <option>-m</option> option to
      set the TTL of outgoing packets. &merged;</para>

    <para>&man.ping.8; now supports a <option>-A</option> option to
      beep when packets are lost. &merged;</para>

    <para>Userland &man.ppp.8; has received a number of updates and
      bug fixes. &merged;</para>

    <para>&man.ppp.8; has gained the <literal>tcpmssfixup</literal>
      option, which adjusts outgoing and incoming TCP SYN packets so
      that the maximum receive segment size is no larger than allowed
      by the interface MTU. &merged;</para>

    <para>&man.ppp.8; now supports IPv6.</para>

    <para>&man.pppd.8; (the control program for kernel-level PPP) is
      now installed mode <literal>4550</literal> and
      <username>root</username><literal>:</literal><groupname>dialer</groupname>,
      rather than mode <literal>4555</literal> (in other words, it is
      no longer world-executable).  Users of &man.pppd.8; may need to
      change their group settings. &merged;</para>

    <para>The <option>-W</option> option to &man.ps.1; (to extract
      information from a specified swap device) has been useless for
      some time; it has been removed. &merged;</para>

    <para>&man.pwd.1; can now double as &man.realpath.1;, a program to
      resolve pathnames to their underlying physical
      paths. &merged;</para>

    <para>The pseudo-random number generator implemented by
      &man.rand.3; has been improved to provide less biased
      results.</para>

    <para>&man.rc.8; now has an framework for handling dependencies
      between &man.rc.conf.5; variables. &merged;</para>

    <para>&man.rc.8; now deletes all non-directory files in
      <filename>/var/run</filename> and
      <filename>/var/spool/lock</filename> at boot
      time. &merged;</para>

    <para>&man.rcmd.3; now supports the use of the
      <envar>RSH</envar> environment variable to specify a program to
      use other than &man.rsh.1; for remote execution.  As a result,
      programs such as &man.dump.8;, can use &man.ssh.1; for remote
      transport.</para>

    <para>&man.rdist.1; has been retired from the base system, but is
      still available from &os; Ports Collection as
      <filename role="package">net/44bsd-rdist</filename>.</para>

    <para>The &man.resolver.3; in &os; now implements EDNS0 support,
      which will be necessary when working with IPv6 transport-ready
      resolvers/DNS servers. &merged;</para>

    <para>The &man.rfork.thread.3; library call has been added as a
      helper function to &man.rfork.2;.  Using this function should
      avoid the need to implement complex stack swap
      code. &merged;</para>

    <para>The <option>-v</option> option to &man.rm.1; now displays
      the entire pathname of a file being removed.</para>

    <para>&man.route.8; is now more verbose when changing indirect
      routes, in the case of a gateway route that is the same route as
      the one being modified. &merged;</para>

    <para>&man.route.8; now uses
      <literal><replaceable>host</replaceable>/<replaceable>bits</replaceable></literal>
      syntax instead of
      <literal><replaceable>net</replaceable>/<replaceable>bits</replaceable></literal>
      syntax, for compatibility with &man.netstat.1;. &merged;</para>

    <para>&man.route.8; can now create <quote>proxy only</quote>
      published ARP entries. &merged;</para>

    <para>The &man.route.8; <option>add</option> command now supports
      the <option>-ifp</option> and <option>-ifa</option>
      modifiers. &merged;</para>

    <para>&man.rpcbind.8; has replaced &man.portmap.8;.</para>

    <para>&man.rpcgen.1; now uses <filename>/usr/bin/cpp</filename>
      (as on NetBSD), not
      <filename>/usr/libexec/cpp</filename>.</para>

    <para>&man.rpc.lockd.8; has been imported from NetBSD.  This
      daemon provides support for servicing client NFS locks.</para>

    <para>The performance of the ELF dynamic linker &man.rtld.1; has
      been improved. &merged;</para>

    <para>RSA Security has waived all patent rights to the
      <application>RSA</application> algorithm.  As a result, the
      native <application>OpenSSL</application> implementation of the
      RSA algorithm is now activated by default, and the <filename
      role="package">security/rsaref</filename> port and the
      <filename>librsaUSA</filename> and
      <filename>librsaINTL</filename> libraries are no longer required
      for USA and non-USA residents respectively. &merged;</para>

    <para>&man.rtld.1; will now print the names of all objects that
      cause each object to be loaded, if the
      <varname>LD_TRACE_LOADED_OBJECTS_ALL</varname> environment
      variable is defined.</para>

    <para>&man.savecore.8; now supports a <option>-k</option> option
      to prevent clearing a crash dump after saving it.  It also
      attempts to avoid writing large stretches of zeros to crash dump
      files to save space and time. &merged;</para>

    <para>&man.savecore.8; now works correctly on machines with 2 GB
      or more of RAM. &merged;</para>

    <para>&man.sed.1; now takes a <option>-E</option> option for
      extended regular expression support. &merged;</para>

    <para>&man.send-pr.1; now takes a <option>-a</option> option to
      include a file into the <literal>Fix:</literal> section of a
      problem report. &merged;</para>

    <para>The &man.setfacl.1; and &man.getfacl.1; commands have been
      added to manage file system Access Control Lists.</para>

    <para>&man.setproctitle.3; has been moved from
      <filename>libutil</filename> to
      <filename>libc</filename>. &merged;</para>

    <para>&man.sh.1; now implements <command>test</command> as a
      built-in command for improved efficiency. &merged;</para>

    <para>&man.sh.1; no longer implements <command>printf</command> as
      a built-in command because it was considered less valuable
      compared to the other built-in commands (this functionality is,
      of course, still available through the &man.printf.1;
      executable).</para>

    <para>&man.sockstat.1; now has <option>-c</option> and
      <option>-l</option> flags for listing connected and listening
      sockets, respectively. &merged;</para>

    <para>&man.split.1; now has the ability to split a file longer
      than 2GB. &merged;</para>

    <para>In preparation for meeting SUSv2/POSIX
      <filename>&lt;sys/select.h&gt;</filename> requirements,
      <literal>struct selinfo</literal> and related functions have been
      moved to <filename>&lt;sys/selinfo.h&gt;</filename>.</para>

    <para>The &man.strnstr.3; and &man.strcasestr.3; variants of
      &man.strstr.3; have been implemented. &merged;</para>

    <para>&man.stty.1; now has support for an
      <literal>erase2</literal> control character, so that, for
      example, both the <keycap>Delete</keycap> and
      <keycap>Backspace</keycap> keys can be used to erase
      characters. &merged;</para>

    <para>&man.style.perl.7;, a style guide for Perl code in the &os;
      base system, has been added. &merged;</para>

    <para>&man.su.1; now uses <application>PAM</application> for
      authentication.</para>

    <para>Boot-time &man.syscons.4; configuration was moved to a
      machine-independent
      <filename>/etc/rc.syscons</filename>. &merged;</para>

    <para>&man.sysctl.8; now supports a <option>-N</option> option to
      print out variable names only. &merged;</para>

    <para>&man.sysctl.8; has replaced the <option>-A</option> and
      <option>-X</option> options with <option>-ao</option> and
      <option>-ax</option> respectively; the former options are now
      deprecated.  The <option>-w</option> option is deprecated as
      well; it is not needed to determine the user's
      intentions. &merged;</para>

    <para>&man.sysctl.8; now supports a <option>-e</option> option to
      separate variable names and values by <literal>=</literal>
      rather than <literal>:</literal>.  This feature is useful for
      producing output that can be fed back to
      &man.sysctl.8;. &merged;</para>

    <para>&man.sysinstall.8; now properly preserves
      <filename>/etc/mail</filename> during a binary
      upgrade. &merged;</para>

    <para>&man.sysinstall.8; now uses some more intuitive defaults
      thanks to some new dialog support functions. &merged;</para>

    <para>The default root partition in &man.sysinstall.8; is now
      100MB on the i386 and 120MB on the Alpha.</para>

    <para>&man.sysinstall.8; now lives in
      <filename>/usr/sbin</filename>, which simplifies the
      installation process.  The &man.sysinstall.8; manpage is also
      installed in a more consistent fashion now.</para>

    <para>&man.sysinstall.8; now has the ability to load KLDs as a
      part of the installation. &merged;</para>

    <para>When run from the installation media, &man.sysinstall.8;
      will automatically load any device drivers found in the
      <filename>/stand/modules</filename> directory of the
      <literal>mfsroot</literal> floppy or filesystem image.  Note
      that any drivers so loaded will not appear in the kernel's boot
      messages; the &man.sysinstall.8; debugging screen will provide
      additional information. &merged;</para>

    <para>&man.sysinstall.8; now enables Soft Updates by default on
      all filesystems it creates, except for the root
      filesystem. &merged;</para>

    <para>&man.sysinstall.8; has received updates for its
      <quote>auto</quote> partitioning mode which provide more
      reasonable defaults for the sizes of partitions that are
      created; auto-sized partitions can now also recover the space
      that becomes available when other partitions are
      deleted. &merged;</para>

    <para>&man.syslogd.8; can take a <option>-n</option> option to
      disable DNS queries for every request. &merged;</para>

    <para>&man.syslogd.8; now supports a
      <literal>LOG_CONSOLE</literal> facility (disabled by default),
      which can be used to log <filename>/dev/console</filename>
      output. &merged;</para>

    <para>&man.syslogd.8; now has the ability to bind to a specific
      address (as opposed to using every available one) via the
      <option>-b</option> option. &merged;</para>

    <para>&man.syslogd.8; now accepts a <option>-c</option> flag to
      disable repeated line compression. &merged;</para>

    <para>&man.tail.1; now has the ability to work on files longer
      than 2GB. &merged;</para>

    <para>&man.tar.1; now supports the <varname>TAR_RSH</varname>
      variable, principally to enable the use of &man.ssh.1; as a
      transport. &merged;</para>

    <para>&man.telnet.1; now does autologin and encryption by default;
      a new <option>-y</option> option turns off encryption.</para>

    <para>&man.telnet.1; now supports a <option>-u</option> flag to
      allow connections to UNIX-domain (<literal>AF_UNIX</literal>)
      sockets. &merged;</para>

    <para>&man.tftpd.8; now takes the <option>-c</option> and
      <option>-C</option> options, which allow the server to
      &man.chroot.2; based on the IP address of the connecting client.
      &man.tftp.1; and &man.tftpd.8; can now transfer files larger
      than 65535 blocks. &merged;</para>

    <para>&man.tftpd.8; now supports RFC 2349 (TFTP Timeout Interval
      and Transfer Size Options); this feature is required by some
      firmware like EFI boot managers (at least on HP i2000 Itanium
      servers) in order to boot an image using
      <application>TFTP</application>.</para>

    <para arch="alpha">&man.timed.8; now works on the alpha.</para>

    <para>A version of Transport Independent RPC
      (<application>TI-RPC</application>) has been imported.</para>

    <para>&man.tmpnam.3; will now use the <envar>TMPDIR</envar>
      environment variable, if set, to specify the location of
      temporary files. &merged;</para>

    <para>&man.tip.1; has been updated from
      <application>OpenBSD</application>, and has the ability to act
      as a &man.cu.1; substitute.</para>

    <para>&man.top.1; will now use the full width of its tty.</para>

    <para>&man.touch.1; now takes a <option>-h</option> option to
      operate on a symbolic link, rather than what the link points
      to.</para>

    <para>The &man.truncate.1; utility, which truncates or extends the
      length of files, has been added. &merged;</para>

    <para>Ukrainian language support has been added to the &os;
      console. &merged;</para>

    <para><application>UUCP</application> has been removed from the
      base system.  It can be found in the Ports Collection, in
      <filename role="package">net/freebsd-uucp</filename>.</para>

    <para>&man.units.1; has received some updates and
      bugfixes. &merged;</para>

    <para>&man.usbdevs.8; now supports a <option>-d</option> flag to
      show the device driver associated with each device.</para>

    <para>The &man.usbhidctl.1; utility has been added to manipulate
      USB Human Interface Devices. &merged;</para>

    <para>&man.uudecode.1; now accepts a <option>-o</option> option to
      set its output file.</para>

    <para>&man.vidcontrol.1; now accepts a <option>-g</option>
      parameter to select custom text geometry in the
      <literal>VESA_800x600</literal> raster text mode. &merged;</para>

    <para>&man.vidcontrol.1; now allows the user to omit the font size
      specification when loading a font, and has some better
      error-handling. &merged;</para>

    <para>&man.vidcontrol.1; now supports a <option>-p</option> option
      to take a snapshot of a &man.syscons.4; video buffer.  These
      snapshots can be manipulated by the
      <filename role="package">graphics/scr2png</filename> utility in
      the Ports Collection. &merged;</para>

    <para>&man.vidcontrol.1; now supports a <option>-C</option> option
      to clear the history buffer for a given tty, as well as a
      <option>-h</option> option to set the size of the history
      buffer. &merged;</para>

    <para>The default stripe size in &man.vinum.8; has been changed
      from 256KB to 279KB, to spread out superblocks more evenly
      between stripes.</para>

    <para>&man.wall.1; now supports a <option>-g</option> flag to
      write a message to all users of a given group. &merged;</para>

    <para>&man.watch.8; now takes a <option>-f</option> option to
      specify a &man.snp.4; device to use. &merged;</para>

    <para>&man.which.1; is now a C program, rather than a Perl
      script.</para>

    <para>&man.whois.1; now directs queries for IP addresses to ARIN.
      If a query to ARIN references APNIC or RIPE, the appropriate
      server will also be queried, provided that the
      <option>-Q</option> option is not specified. &merged;</para>

    <para>&man.whois.1; supports a <option>-c</option> option to
      specify a country code to help direct queries towards a
      particular whois server. &merged;</para>

    <para>&man.xargs.1; now supports a <option>-J</option>
      <replaceable>replstr</replaceable> option that allows the user
      to tell &man.xargs.1; to insert the data read from standard
      input at a specific point in the command line arguments rather
      than at the end. &merged;</para>

    <para>The compiler chain now uses the FSF-supplied C/C++ runtime
      initialization code.  This change brings about better
      compatibility with code generated from the various egcs and gcc
      ports, as well as the stock public FSF source. &merged;</para>

    <para>The threads library has gained some signal handling changes,
      bug fixes, and performance enhancements (including zero system
      call thread switching).  &man.gdb.1; thread support has been
      updated to match these changes. &merged;</para>

    <para>Significant additions have been made to internationalization
      support; &os; now has complete locale support for the
      <literal>LC_MONETARY</literal>, <literal>LC_NUMERIC</literal>,
      and <literal>LC_MESSAGES</literal> categories.  A number of
      applications have been updated to take advantage of this
      support. &merged;</para>

    <para>Locale names have been changed to improve compatibility with
      the names used by X11R6, as well as a number of other UNIX
      versions.  As an example, the
      <literal>en_US.ISO_8859-1</literal> locale name has been changed
      to
      <literal>en_US.ISO8859-1</literal>.  Entries in
      <filename>/etc/locale.alias</filename> provide backward
      compatibility. &merged;</para>

    <para><filename>/usr/src/share/examples/BSD_daemon/</filename> now
      contains a scalable Beastie graphic. &merged;</para>

    <para>As part of an ongoing process, many manual pages were
      improved, both in terms of their formatting markup and in their
      content. &merged;</para>

    <sect3>
      <title>Contributed Software</title>

      <para><application>am-utils</application> has been updated to
	6.0.7.</para>

      <para>A 10 February 2002 snapshot of <application>awk</application> from Bell Labs (variously
	known as <quote>BWK awk</quote> or <quote>The One True
	AWK</quote>) has been imported.  It is available as
	<command>awk</command> on the sparc64 architecture, and
	<command>nawk</command> on other architectures.</para>

      <para><application>bc</application> has been updated from 1.04 to
	1.06. &merged;</para>

      <para>The ISC library from the <application>BIND</application>
	distribution is now built as
      <filename>libisc</filename>. &merged;</para>

      <para><application>BIND</application> is now built with the
	<literal>NOADDITIONAL</literal> flag, which causes
	&man.named.8; to operate in a more consistent fashion for
	certain common misconfigurations. &merged;</para>

      <para><application>BIND</application> has been updated to
	8.3.1-REL. &merged;</para>

      <para><application>Binutils</application> has been updated to
	2.12.0.</para>

      <para><application>bzip2</application> 1.0.2 has been imported;
	this brings the &man.bzip2.1; program and the
	<filename>libbz2</filename> library to the base
	system. &merged;</para>

      <para>The &man.ee.1; <application>Easy Editor</application> has
	been updated to 1.4.2. &merged;</para>

      <para><application>file</application> has been updated to
	3.37.</para>

      <para><application>gcc</application> has been updated to
	a snapshot of the 2.95 development branch from 20 March 2002
	(this snapshot includes changes made after the release of
	<application>gcc</application>2.95.3).</para>

      <para>&man.gcc.1; now uses a unified <filename>libgcc</filename>
	rather than a separate one for threaded and non-threaded
	programs.  <filename>/usr/lib/libgcc_r.a</filename> can be
	removed. &merged;</para>

      <para>&man.gcc.1; now supports the environment variable
	<envar>GCC_OPTIONS</envar>, which can hold a set of default
	options for <application>GCC</application>. &merged;</para>

      <para><application>GNATS</application> has been updated to
	3.113. &merged;</para>
     
      <para><application>GNU awk</application> has been updated to
	3.1.0.  It is available as <command>gawk</command> on the
	sparc64 architecture, and as <command>awk</command> on other
	architectures.</para>

      <para><application>gperf</application> has been updated to
	2.7.2.</para>

      <para><application>groff</application> and its related utilities
	have been updated to FSF version 1.17.2.  This import brings
	in a new &man.mdoc.7; macro package (sometimes referred to as
	<literal>mdocNG</literal>), which removes many of the
	limitations of its predecessor. &merged;</para>

      <para><application>Heimdal</application> has been updated to
	0.3f.</para>

      <para>The version of <application>IPFilter</application>
	provided with &os; now includes the &man.ipfs.8; program,
	which allows state information created for NAT entries and
	stateful rules to be saved to disk and restored after a
	reboot.  Boot-time configuration of these features is
	supported by &man.rc.conf.5;. &merged;</para>

      <para>The <application>ISC DHCP</application> client has been
	updated to 3.0.1RC8. &merged;</para>

      <para><application>Kerberos IV</application> has been updated to
	1.0.5. &merged;</para>

      <para>The &man.more.1; command has been replaced by
	&man.less.1;, although it can still be run as
	<command>more</command>. &merged; Version 371 of
      <application>less</application> has been imported.</para>

      <para><application>libpcap</application> has been updated to
	0.6.2. &merged;</para>

      <para><application>libreadline</application> has been updated to
	4.2.</para>

      <para><application>libz</application> has been updated to
	1.1.4.</para>

      <para><application>lint</application> has been updated to
	snapshot of NetBSD &man.lint.1; as of 3 March 2002.</para>

      <para><application>lukemftp</application> (the FTP client from
	NetBSD) has replaced the &os; &man.ftp.1; program.  Among its
	new features are more automation methods, better standards
	compliance, transfer rate throttling, and a customizable
	command-line prompt.  Some environment variables and
	command-line arguments have changed.</para>

      <para>The FTP daemon from NetBSD, otherwise known as
	<application>lukemftpd</application>, has been imported and is
	available as &man.lukemftpd.8;.</para>

      <para><application>ncurses</application> has been updated to
	5.2-20010512.</para>

      <para>The <application>NTP</application> suite of programs has
	been updated to 4.1.0. &merged;</para>

      <para><application>OpenPAM</application>
        (<quote>Cineraria</quote> release) has been imported,
        replacing
        <application>Linux-PAM</application>.</para>

      <para>The <application>OPIE</application> one-time-password
	suite has been updated to 2.4.  It has completely
	replaced the functionality of
	<application>S/Key</application>.</para>

      <para><application>Perl</application> has been updated to version
	5.6.1.</para>

      <para>&man.routed.8; has been updated to version
	2.22. &merged;</para>

      <para arch="i386">Version 1.4.3 of the
	<application>smbfs</application> userland utilities have been
	imported. &merged;</para>

      <para><application>tcpdump</application> has been updated to
	3.6.3. &merged;</para>

      <para>The &man.csh.1; shell has been replaced by &man.tcsh.1;,
	although it can still be run as <command>csh</command>.
	<application>tcsh</application> has been updated to version
	6.11. &merged;</para>

      <para>The contributed version of
	<application>tcp_wrappers</application> now includes the
	&man.tcpd.8; helper daemon.  While not strictly necessary in a
	standard &os; installation (because &man.inetd.8; already
	incorporates this functionality), this may be useful for
	&man.inetd.8; replacements such as
	<application>xinetd</application>.</para>

      <para><application>texinfo</application> has been updated to
	4.1. &merged;</para>

      <para><application>top</application> has been updated to version
	3.5b12.</para>

      <para>&man.traceroute.8; now takes its default maximum TTL value
	from the <varname>net.inet.ip.ttl</varname> sysctl
	variable. &merged;</para>

      <para>The timezone database has been updated to the
	<filename>tzdata2002c</filename> release. &merged;</para>

      <sect4>
	<title>CVS</title>

	<para><application>cvs</application> has been updated to
	  1.11.1p1. &merged;</para>

	<para>The default value for &man.cvs.1;'s
	  <envar>CVS_RSH</envar> variable is now
	  <literal>ssh</literal>, rather than
	  <literal>rsh</literal>. &merged;</para>

	<para>&man.cvs.1; now supports a <option>-T</option> option to
	  update a sandbox's <filename>CVS/Template</filename> file
	  from the repository. &merged;</para>

	<para>&man.cvs.1; <literal>diff</literal> now supports the
	  <option>-j</option> option to perform differences against a
	  revision relative to a branch tag. &merged;</para>
      </sect4>

      <sect4>
	<title>CVSup</title>

	<para><application>CVSup</application>, a frequently used
	  utility in the &os; Ports Collection, was formerly
	  installable using several ports and packages.  The
	  <filename role="package">net/cvsup-bin</filename> and
	  <filename role="package">net/cvsupd-bin</filename>
	  ports/packages are no longer necessary or available; the
	  <filename role="package">net/cvsup</filename> port should be
	  used instead. &merged;</para>

	<para><application>CVSup</application> has been updated to
	  16.1_3, which is available in the &os; Ports Collection as
	  <filename role="package">net/cvsup</filename>.  This update
	  fixes a long-standing (but only recently encountered) bug
	  which affects the timestamps on all files after Sun Sep 9
	  01:46:40 UTC 2001 (1,000,000,000 seconds after the UNIX
	  epoch). &merged;</para>
      </sect4>

      <sect4 id="kame-userland">
	<title>KAME</title>

	<para>The IPv6 stack is now based on a snapshot based on the
	  KAME Project's IPv6 snapshot as of 28 May, 2001.  Most of
	  the items listed in this section are a result of this
	  import.
	  <xref linkend="kame-kernel"> lists kernel updates to the
	  KAME IPv6 stack. &merged;</para>

	<para>&man.faithd.8; now supports a configuration file for
	  access control. &merged;</para>

	<para>&man.ifconfig.8; can now perform the functions of
	  &man.gifconfig.8;. &merged;</para>

	<para>&man.ifconfig.8; can now perform the functions of
	  &man.prefix.8;.  &man.prefix.8; is now a shell script for
	  partial backwards compatibility. &merged;</para>

	<para>&man.ndp.8; now implements garbage collection for stale
	  NDP entries, as described in RFC 2461 (Neighbor Discovery
	  for IP Version 6 (IPv6)). &merged;</para>

	<para>&man.pim6dd.8; and &man.pim6sd.8; have been removed due
	  to restrictive licensing conditions.  These programs are
	  available in the ports collection as
	  <filename role="package">net/pim6dd</filename> and
	  <filename role="package">net/pim6sd</filename>. &merged;</para>

	<para>&man.route6d.8; now supports an <option>-n</option> flag
	  to avoid updating the kernel forwarding
	  table. &merged;</para>

	<para>The <option>-R</option> (router renumbering) option to
	  &man.rtadvd.8; is currently ignored. &merged;</para>
      </sect4>

      <sect4>
	<title>OpenSSH</title>

	<para><application>OpenSSH</application> has been updated to
	  2.9, which provides support for the SSH2 protocol (now the
	  default) and DSA keys.  &man.ssh-add.1; and
	  &man.ssh-agent.1; can now handle DSA keys, with support for
	  authentication forwarding.
	  <application>OpenSSH</application> users in the USA no
	  longer need to rely on the restrictively-licensed RSAREF
	  toolkit which is required to handle RSA keys.  Among other
	  new features: A client and server for &man.sftp.1; has been added.
	  &man.scp.1; can now handle files larger than 2 GBytes.  A
	  limit on the number of outstanding, unauthenticated
	  connections in &man.sshd.8; has been added.  Support has
	  been added for the Rijndael encryption algorithm.  Rekeying
	  of existing sessions is now supported, and an experimental
	  <application>SOCKS4</application> proxy has been added to
	  &man.ssh.1;. &merged;</para>

	<para><application>OpenSSH</application> has been updated to
	  version 3.1.  Among the changes:
	    <itemizedlist>
	      <listitem>
	        <para>The <filename>*2</filename> files are obsolete
		  (for example,
		  <filename>~/.ssh/known_hosts</filename> can hold the 
		  contents of
		  <filename>~/.ssh/known_hosts2</filename>).</para>
	      </listitem>
	      <listitem>
	        <para>&man.ssh-keygen.1; can import and export keys using
		  the SECSH Public Key File Format, for key exchange
		  with several commercial SSH implementations.</para>
	      </listitem>
	      <listitem>
	        <para>&man.ssh-add.1; now adds all three default keys.</para>
	      </listitem>
	      <listitem>
	        <para>&man.ssh-keygen.1; no longer defaults to a
		  specific key type; one must be specified with the
		  <option>-t</option> option.</para>
	      </listitem>
	    </itemizedlist>
	  </para>

	<para><application>OpenSSH</application> can now authenticate
	  using <application>OPIE</application> passwords.</para>

	<para><application>PAM</application> support for
	  <application>OpenSSH</application> has been added.</para>

	<para>A long-standing bug in
	  <application>OpenSSH</application>, which sometimes resulted
	  in a dropped session when an X11-forwarded client was
	  closed, was fixed.</para>

	<para><application>Kerberos</application> compatibility has
	  been added to
	  <application>OpenSSH</application>. &merged;</para>

	<para><application>OpenSSH</application> has been modified to
	  be more resistant to traffic analysis by requiring that
  	  <quote>non-echoed</quote> characters are still echoed back
	  in a null packet, as well as by padding passwords sent so as
	  not to hint at password lengths. &merged;</para>

	<para>&man.sshd.8; is now enabled by default on new
	  installs. &merged;</para>

	<para>&man.sshd.8; <literal>X11Forwarding</literal> is now
	  turned on by default on the server (any risk is to the
	  client, where it is already disabled by
	  default). &merged;</para>

	<para>In <filename>/etc/ssh/sshd_config</filename>, the
	  <literal>ConnectionsPerPeriod</literal> parameter has been
	  deprecated in favor of
	  <literal>MaxStartups</literal>. &merged;</para>

	<para><application>OpenSSH</application> now has a
	  <literal>VersionAddendum</literal> configuration setting for
	  &man.sshd.8; to allow changing the part of the
	  <application>OpenSSH</application> version string after the
	  main version number.</para>
      </sect4>

      <sect4>
	<title>OpenSSL</title>

	<para><application>OpenSSL</application> has been updated to
	  0.9.6c.</para>

	<para><application>OpenSSL</application> now has support for
	  machine-dependent ASM optimizations, activated by the new
	  <varname>MACHINE_CPU</varname> and/or
	  <varname>CPUTYPE</varname>
	  <filename>make.conf</filename> variables. &merged;</para>
      </sect4>

      <sect4>
	<title>sendmail</title>

	<para><application>sendmail</application> has been updated
	  from version 8.9.3 to version 8.12.3.  Important changes
	  include: &man.sendmail.8; is no longer installed as a
	  set-user-ID root binary (now set-group-ID smmsp); new
	  default file locations (see
	  <filename>/usr/src/contrib/sendmail/cf/README</filename>);
	  &man.newaliases.1; is limited to <username>root</username>
	  and trusted users; STARTTLS encryption; and the MSA port
	  (587) is turned on by default.  See
	  <filename>/usr/src/contrib/sendmail/RELEASE_NOTES</filename>
	  for more information. &merged;</para>

	<para>&man.mail.local.8; is no longer installed as a
	  set-user-ID binary.  If you are using a
	  <filename>/etc/mail/sendmail.cf</filename> from the default
	  <filename>sendmail.cf</filename> included with &os; any time
	  after 3.1.0, you are fine.  If you are using a
	  hand-configured <filename>sendmail.cf</filename> and
	  <command>mail.local</command> for delivery, check to make sure the
	  <literal>F=S</literal> flag is set on the
	  <literal>Mlocal</literal> line.  Those with
	  <filename>.mc</filename> files who need to add the flag can
	  do so by adding the following line to their
	  <filename>.mc</filename> file and regenerating the
	  <filename>sendmail.cf</filename> file:</para>

	<programlisting>MODIFY_MAILER_FLAGS(`LOCAL',`+S')dnl</programlisting>

	<para>Note that <literal>FEATURE(`local_lmtp')</literal> already
	  does this. &merged;</para>

	<para>The default <filename>/etc/mail/sendmail.cf</filename>
	  disables the SMTP <literal>EXPN</literal> and
	  <literal>VRFY</literal> commands. &merged;</para>

	<para>&man.vacation.1; has been updated to use the version
	  included with <application>sendmail</application>. &merged;</para>

	<para>The <application>sendmail</application> configuration
	  building tools are installed in
	  <filename>/usr/share/sendmail/cf/</filename>. &merged;</para>

	<para>New <filename>make.conf</filename> options:
	  <varname>SENDMAIL_MC</varname> and
	  <varname>SENDMAIL_ADDITIONAL_MC</varname>.  See
	  <filename>/usr/share/examples/etc/make.conf</filename> for more
	  information. &merged;</para>

	<para><filename>/etc/mail/Makefile</filename> now supports:
	  the new <varname>SENDMAIL_MC</varname>
	  <filename>make.conf</filename> option; the ability to build
	  <filename>.cf</filename> files from
	  <filename>.mc</filename> files; generalized map rebuilding;
	  rebuilding the aliases file; and the ability to stop, start,
	  and restart
	  <application>sendmail</application>. &merged;</para>

	<para>The <username>smmsp</username> and
	  <username>mailnull</username> users have been added to
	  <filename>/etc/master.passwd</filename>.  In the absence of a
	  <literal>confDEF_USER_ID</literal> setting, by default,
	  <application>sendmail</application> will use the
	  <username>mailnull</username> user for extra security.
	  Previously, if the <username>mailnull</username> user did
	  not exist, the <username>daemon</username> user was used.
	  This change may generate some permissions issues when
	  mailing to files or to programs (such as <filename
	  role="package">mail/majordomo</filename>).  &merged; The
	  previous behavior can be restored by adding the following
	  line to a system's
	  <filename><replaceable>*</replaceable>.mc</filename>
	  configuration file:

	  <programlisting>define(`confDEF_USER_ID', `daemon')</programlisting>
	</para>

	<para>Beginning with the import of
	  <application>sendmail</application> 8.12.2, multiple
	  <application>sendmail</application> daemons (some required
	  to handle outgoing mail) are started by &man.rc.8;, even if
	  the <varname>sendmail_enable</varname> variable is set to
	  <literal>NO</literal>.  To completely disable
	  <application>sendmail</application>,
	  <varname>sendmail_enable</varname> must be set to
	  <literal>NONE</literal>.  Alternatively, for systems using a
	  different MTA, the <varname>mta_start_script</varname> can
	  be used to point to a different startup script (more details
	  can be found in &man.rc.sendmail.8;). &merged;</para>

	<para>By default, &man.rc.8; no longer enables
	  <application>sendmail</application> for inbound SMTP
	  connections.  Note that &man.sysinstall.8; may override this
	  default for a binary installation, based on what security
	  profile is selected.  This functionality can also be
	  manually enabled by adding the following line to
	  <filename>/etc/rc.conf</filename>:</para>

	<programlisting>sendmail_enable="YES"</programlisting>

      </sect4>
    </sect3>

    <sect3>
      <title>Ports/Packages Collection</title>

      <para><application>BSDPAN</application>, a collection of modules
	that provides tighter integration of
	<application>Perl</application> into the &os; Ports
	Collection, has been added.</para>

      <para>&man.pkg.create.1; and &man.pkg.add.1; can now work with
	packages that have been compressed using
	&man.bzip2.1;. &man.pkg.add.1; will use the PACKAGEROOT
	environment variable to determine a mirror site for new
	packages. &merged;</para>

      <para>&man.pkg.create.1; now records dependencies in dependency
	order rather than in the order specified on the command line.
	This improves the functioning of <command>pkg_add
	-r</command>. &merged;</para>

      <para>&man.pkg.create.1; now supports a <option>-b</option> to
	create a package file from a locally-installed
	package. &merged;</para>

      <para>When requested to delete multiple packages,
	&man.pkg.delete.1; will now attempt to remove them in
	dependency order rather than the order specified on the
	command line. &merged;</para>

      <para>&man.pkg.delete.1; now can perform glob/regexp matching of
	package names.  In addition, it supports a <option>-a</option>
	option for removing all packages and a <option>-i</option>
	option for &man.rm.1;-style interactive
	confirmation. &merged;</para>

      <para>&man.pkg.delete.1; now supports a <option>-r</option>
	option for recursive package removal. &merged;</para>

      <para>&man.pkg.info.1; now supports globbing against names of
	installed packages.  The <option>-G</option> option disables
	this behavior, and the <option>-x</option> option causes
	regular expression matching instead of shell
	globbing. &merged;</para>

      <para>&man.pkg.info.1; can now accept a <option>-g</option> flag
	for verifying an installed package against its recorded
	checksums (to see if it's been modified post-installation).
	Naturally, this mechanism is only as secure as the contents of
	<filename>/var/db/pkg</filename> if it's to be used for auditing
	purposes. &merged;</para>

      <para>&man.pkg.sign.1; and &man.pkg.check.1; have been added to
	digitally sign and verify the signatures on binary package
	files. &merged;</para>

      <para>&man.pkg.update.1;, a utility to update installed packages
	and update their dependencies, has been added. &merged;</para>

      <para>&man.pkg.version.1; now has a version number comparison
	routine that corresponds to the Porters Handbook.  It also has
	a <option>-t</option> option for testing address comparisons.
	&merged;</para>

      <para>&man.pkg.version.1; now takes a <option>-s</option> flag
	to limit its operation to ports/packages matching a given
	string. &merged;</para>

      <para>Version numbers of installed packages have a new
	(backward-compatible) syntax, which supports the
	<varname>PORTREVISION</varname> and
	<varname>PORTEPOCH</varname> variables in Ports Collection
	<filename>Makefile</filename>s.  These changes help keep track
	of changes in the ports collection entries such as security
	patches or &os;-specific updates, which aren't reflected in
	the original, third-party software distributions.
	&man.pkg.version.1; can now compare these new-style version
	numbers. &merged;</para>

      <para>To improve performance and disk utilization, the
	<quote>ports skeletons</quote> in the &os; Ports Collection
	have been restructured.  Installed ports and packages should
	not be affected. &merged;</para>

      <para>All packages and ports now contain an
	<quote>origin</quote> directive, which makes it easier for
	programs such as &man.pkg.version.1; to determine the
	directory from which a package was built. &merged;</para>
    </sect3>
  </sect2>
</sect1>

<sect1>
  <title>Upgrading from previous releases of &os;</title>

  <para>If you're upgrading from a previous release of &os;, you
    generally will have three options:

    <itemizedlist>
      <listitem>
	<para>Using the binary upgrade option of &man.sysinstall.8;.
	  This option is perhaps the quickest, although it presumes
	  that your installation of &os; uses no special compilation
	  options.</para>
      </listitem>
      <listitem>
	<para>Performing a complete reinstall of &os;.  Technically,
	  this is not an upgrading method, and in any case is usually less
	  convenient than a binary upgrade, in that it requires you to
	  manually backup and restore the contents of
	  <filename>/etc</filename>.  However, it may be useful in
	  cases where you want (or need) to change the partitioning of
	  your disks.
      </listitem>
      <listitem>
	<para>From source code in <filename>/usr/src</filename>.  This
	  route is more flexible, but requires more disk space, time,
	  and more technical expertise.  Upgrading from very old
	  versions of &os; may be problematic; in cases like this, it
	  is usually more effective to perform a binary upgrade or a
	  complete reinstall.</para>
      </listitem>
    </itemizedlist>
  </para>

  <para>Please read the <filename>INSTALL.TXT</filename> file for more
    information, preferably <emphasis>before</emphasis> beginning an
    upgrade.  If you are upgrading from source, please be sure to read
    <filename>/usr/src/UPDATING</filename> as well.</para>

  <para>Finally, if you want to use one of various means to track the
    -STABLE or -CURRENT branches of &os;, please be sure to consult
    the <ulink
    url="http://www.FreeBSD.org/handbook/current-stable.html"><quote>-CURRENT
    vs. -STABLE</quote></ulink> section of the <ulink
    url="http://www.FreeBSD.org/handbook/">FreeBSD
    Handbook</ulink>.</para>

  <important>
    <para>Upgrading &os; should, of course, only be attempted after
      backing up <emphasis>all</emphasis> data and configuration
      files.</para>
  </important>
</sect1>